Atlantic LCR3 Manual


Læs gratis den danske manual til Atlantic LCR3 (4 sider) i kategorien Højttaler. Denne vejledning er vurderet som hjælpsom af 18 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 9.5 anmeldelser. Har du et spørgsmål om Atlantic LCR3, eller vil du spørge andre brugere om produktet?

Side 1/4
LCR3
Compact High Performance Loudspeaker
Specications for the L
Specications for the L
Specications for the L
Specications for the LSpecications for the LC
C
C
CCR3
R3
R3
R3R3
Type Sealed-box, 2-way
Drivers: Woofers (2) 31/2˝ CPP
Tweeter (1) 3/4˝ silk dome tweeters
Frequency Response 100Hz - 20kHz (± 3dB)
Nominal Impedance 6 Ohms
Crossover Frequency 3.5kHz
Sensitivity 88dB
Recommended Amplier Power 10-125 Watts
Dimensions 43/4˝ x 111/4˝ x 5˝ (120mm x 284mm x 127mm) w/grille
Weight (each, unpacked) 4.78 lbs; 10.5kg
Specications are those in effect at the time of printing. Atlantic Technology reserves the right to change specications or
appearance at any time without notice.
Dolby Digital, AC-3, 5.1, Dolby Stereo and Dolby Pro Logic are trademarks of Dolby Laboratories Licensing Corporation.
DTS is a registered trademark of DTS Inc.
343 Vanderbilt Avenue Norwood, MA 02062
(781) 762-6300
www.atlantictechnology.com
LCR3
Compact High Performance
Loudspeaker
Thank you for choosing Atlantic Technology home
theater products. Your new speaker system is precision
craed to give you years of enjoyable, trouble free serv-
ice. is manual covers the Atlantic Technology LCR3.
e LCR3 is a versatile loudspeaker that can be used in
any position in a home theater such as a leor right
channel or a center channel or even a surround channel.
Each LCR3 consists of a low resonance MDF cabinet,
dual 3.5˝ CPP drivers, 3/4˝ silk dome tweeter and high
quality crossover components. e LCR3 is designed for
use with all surround formats such as Dolby Digital,
DTS or Dolby Atmos.
Us
Us
Us
UsUsi
i
i
iing the L
ng the L
ng the L
ng the Lng the LCR
CR
CR
CRCR3 as a F
3 as a F
3 as a F
3 as a F3 as a Front Ch
ront Ch
ront Ch
ront Chront Channel
annel
annel
annelannel
Speaker or Surr
Speaker or Surr
Speaker or Surr
Speaker or SurrSpeaker or Surround Channel Speaker
ound Channel Speaker
ound Channel Speaker
ound Channel Speakeround Channel Speaker
We recommend placing the LCR3 with the tweeters
facing inward. Set the receiver bass management or
speaker size to “small” and the crossover to 100Hz.
Alternatively, if you have limited room you can use the
LCR3 horizontal positioned just like a center channel.
We have included four 4mm rubber feet in each accessory
bag to mount to the bottom of the cabinet depending on
how you choose to place the speaker.
Aer you have determined the best way to mount the
speaker, peel and stick the Atlantic Wave logo to the grill.
Us
Us
Us
UsUsi
i
i
iing the L
ng the L
ng the L
ng the Lng the LCR
CR
CR
CRCR3 as a
3 as a
3 as a
3 as a3 as a
Ce
Ce
Ce
CeCenter Channel Speake
nter Channel Speake
nter Channel Speake
nter Channel Speakenter Channel Speaker
r
r
rr
We recommend placing the LCR3 with the tweeters
positioned away from any table or shelf as shown in the
picture. Set the receiver bass management or speaker
size to “small” and the crossover to 100Hz.
We have included four 4mm rubber feet in each accessory
bag to mount to the bottom of the cabinet depending on
how you choose to place the speaker.
Aer you have determined the best way to mount the
speaker, peel and stick the Atlantic Wave logo to the grill.
e Atlantic Technology LCR3 may also be used with a
wide variety of speakers from other manufacturers with
satisfying results.
Con
Con
Con
ConConnec
nec
nec
necnecting
ting
ting
ting ting Y
Y
Y
YYour Sy
our Sy
our Sy
our Syour System
stem
stem
stemstem
We recommend that you connect your LCR3 speaker
systems with high quality dual conductor stranded wire
of 18 gauge or larger, for lengths up to 25 feet. Use 16
gauge dual conductor or larger for longer runs of wire.
Contact your local audio/video specialist for specic
cable recommendations and further information for
special circumstances.
Warning: To prevent risk of electrical shock or damage
to your equipment, always switch off the amplier or
receiver when making connections to the speaker.
You can connect your LCR3 speakers by using a variety of audio connectors,
or you can:
Strip about 1/2˝ (13mm) of
insulation from the con-
n ecting wires. Connect
them to the appropriate
push terminal, being
careful to observe po-
larity (positive to the
red terminal, nega-
tive to the black
terminal).
Whether you are
connecting a
complete LCR3
system, or adding
a single speaker
component to your present system, the wiring should look like the diagram
in Figure 2.
Figure 2: Typical wiring diagram for speakers in a home theater.
Figure 1: Gold plated 5-way binding posts.
Accepts up to 14 gauge bare wire.
Warning: Before turning on the amplier, be certain that no
stray wire strands are touching across the two terminals as this
might damage your amplier.
Finally, check the polarity of your front speakers by listening to some music.
If the sound seems hollow, unusually spread out, or has weak bass, recheck
your connections for proper polarity. If necessary, reverse any out of phase
connections. Only one speaker wired out of phase is usually the culprit.


Produkt Specifikationer

Mærke: Atlantic
Kategori: Højttaler
Model: LCR3

Har du brug for hjælp?

Hvis du har brug for hjælp til Atlantic LCR3 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Højttaler Atlantic Manualer

Højttaler Manualer

Nyeste Højttaler Manualer