Atlantic LCR2 Manual

Atlantic Højttaler LCR2

Læs gratis den danske manual til Atlantic LCR2 (4 sider) i kategorien Højttaler. Denne vejledning er vurderet som hjælpsom af 56 personer og har en gennemsnitlig bedømmelse på 3.7 stjerner ud af 28.5 anmeldelser. Har du et spørgsmål om Atlantic LCR2, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

LCR2

Compact High Performance Loudspeaker

Specications for the L

Specications for the LSpecications for the LC

CCR2

R2R2

Type Sealed-box, 2-way

Drivers: Woofers (1) 31/2˝ CPP

Tweeter (1) 3/4˝ silk dome tweeter

Frequency Response 115Hz - 20kHz (± 3dB)

Nominal Impedance 6 ohms

Crossover Frequency 3.5kHz

Sensitivity 87dB

Recommended Amplier Power 10-125 Watts

Dimensions 43/4˝ x 8˝ x 5˝ (120mm x 204mm x 127mm) w/grille

Weight (each, unpacked) 3.22 lbs; 1.4kg

Specications are those in eﬀect at the time of printing. Atlantic Technology reserves the right to change specications or

appearance at any time without notice.

Dolby Digital, AC-3, 5.1, Dolby Stereo and Dolby Pro Logic are trademarks of Dolby Laboratories Licensing Corporation.

DTS is a registered trademark of DTS Inc.

343 Vanderbilt Avenue Norwood, MA 02062

(781) 762-6300

www.atlantictechnology.com

LCR2

Compact High Performance

Loudspeaker

Thank you for choosing Atlantic Technology home

theater products. Your new speaker system is precision

craed to give you years of enjoyable, trouble free serv-

ice. is manual covers the Atlantic Technology LCR2.

e LCR2 is a versatile loudspeaker that can be used in

any position in a home theater such as a le or right

channel or a center channel or even a surround channel.

Each LCR2 consists of a low resonance MDF cabinet,

3.5˝ CPP driver, 3/4˝ silk dome tweeter and high quality

crossover components. e LCR2 is designed for use

with all surround formats such as Dolby Digital, DTS or

Dolby Atmos.

PPositioning the L

ositioning the L

ositioning the Lositioning the LCR2 as a F

CR2 as a F

CR2 as a FCR2 as a Front,

ront,

ront,ront,

CeCenter or Surround Ch

nter or Surround Ch

nter or Surround Chnter or Surround Channel

annel

annelannel Speake

Speake

Speake Speaker

We recommend placing the LCR2 with the tweeters

facing upward. Set the receiver bass management or

speaker size to “small” and the crossover to 100Hz.

Alternatively, if you have limited room you can use the

LCR2 horizontal positioned just like a center channel.

We have included four 4mm rubber feet in each accessory

bag to mount to the bottom of the cabinet depending on

how you choose to place the speaker.

Con

ConConnec

nec

necnecting

ting

ting ting Y

YYour Sy

our Sy

our Syour System

stem

stemstem

We recommend that you connect your LCR2 speaker

systems with high quality dual conductor stranded wire

of 18 gauge or larger, for lengths up to 25 feet. Use 16

gauge dual conductor or larger for longer runs of wire.

Contact your local audio/video specialist for specic

cable recommendations and further information for

special circumstances.

Warning: To prevent risk of electrical shock or damage

to your equipment, always switch oﬀ the amplier or

receiver when making connections to the speaker.

You can connect your LCR2 speakers by using a variety

of audio connectors, or you can:

Strip about 1/2˝ (13mm) of insulation from the connect-

ing wires. Connect them to the appropriate push termi-

nal, being careful to observe polarity (positive to the red

terminal, negative to the black terminal).

Whether you are connecting a complete LCR2 system,

or adding a single speaker component to your present

system, the wiring should look like the diagram in Fig-

ure 2.

Figure 2: Typical wiring diagram for speakers in a home theater.

Figure 1: Gold plated spring posts. Accepts up to 14 gauge bare wire.

Warning: Before turning on the amplier, be certain that no

stray wire strands are touching across the two terminals as this

might damage your amplier.

Finally, check the polarity of your front speakers by listening to some music.

If the sound seems hollow, unusually spread out, or has weak bass, recheck

your connections for proper polarity. If necessary, reverse any out of phase

connections. Only one speaker wired out of phase is usually the culprit.

Produkt Specifikationer

Mærke:	Atlantic
Kategori:	Højttaler
Model:	LCR2

Har du brug for hjælp?

Hvis du har brug for hjælp til Atlantic LCR2 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Højttaler Atlantic Manualer

Atlantic LCR2 Manual

22 September 2024

Atlantic 4400 THX Select Manual

5 September 2024

Atlantic TLC-8.2 Manual

28 Juli 2024

Atlantic IWTS-10 LCR Manual

26 Juli 2024

Atlantic H-PAS PowerBar 235 Manual

19 Juli 2024

Atlantic 2400 Manual

2 Marts 2024

Atlantic H-PAS AT-1 Manual

15 September 2023

Atlantic FS-7.1 Manual

31 August 2023

Atlantic FS3 Manual

13 Februar 2023

Atlantic IC-6.3-S Manual

3 December 2022

Højttaler Manualer

Nyeste Højttaler Manualer

Lamax PartyGo1 Manual

2 August 2025

The Box Pro DSX 110 M Manual

1 August 2025

Muse M-968 BTY Manual

1 August 2025

Grundig Portable 360 Manual

1 August 2025

Grundig Band 360 Manual

1 August 2025

Grundig GBT Connect 360 Manual

1 August 2025

Muse M-968 BTR Manual

31 Juli 2025

JLab Epic Party Manual

31 Juli 2025

JVC XS-E423 Manual

30 Juli 2025

SoundTube RF31-EZ-T Manual

30 Juli 2025