Atlantic FS3 Manual

Atlantic Højttaler FS3

Læs gratis den danske manual til Atlantic FS3 (4 sider) i kategorien Højttaler. Denne vejledning er vurderet som hjælpsom af 74 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 37.5 anmeldelser. Har du et spørgsmål om Atlantic FS3, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

FS3

Slim Profile Front Stage Loudspeaker

Specications for the FS3

Specications for the FS3Specications for the FS3

Type Sealed-box, 2-way front stage Le, Center, Right

Drivers: Woofers (2) 31/2˝ CPP per channel

Tweeter (1) 3/4˝ silk dome tweeters per channel

Frequency Response 100Hz - 20kHz (± 3dB)

Nominal Impedance 6 Ohms

Crossover Frequency 3.5kHz

Sensitivity 88dB

Recommended Amplier Power 10-125 Watts

Dimensions 42˝ x 43/4˝ x 3˝ (1068mm x 120mm x 76mm) w/grille

Weight (each, unpacked) 13.5 lbs; 6.1kg

Specications are those in eﬀect at the time of printing. Atlantic Technology reserves the right to change specications or

appearance at any time without notice.

Dolby Digital, AC-3, 5.1, Dolby Stereo and Dolby Pro Logic are trademarks of Dolby Laboratories Licensing Corporation.

DTS is a registered trademark of DTS Inc.

343 Vanderbilt Avenue Norwood, MA 02062

(781) 762-6300

www.atlantictechnology.com

Figure 2: Typical wiring diagram for speakers in a home theater.

Warning: Before turning on the amplier, be certain that no stray wire strands

are touching across the two terminals as this might damage your amplier.

Finally, check the polarity of your front speakers by listening to some music. If the

sound seems hollow, unusually spread out, or has weak bass, recheck your connec-

tions for proper polarity. If necessary, reverse any out of phase connections. Only

one speaker wired out of phase is usually the culprit.

FS3

Slim Profile Front Stage

Loudspeaker

ank you for choosing Atlantic Technology

home theater products. Your new speaker system

is precision craed to give you years of enjoyable,

trouble free service. is manual covers the At-

lantic Technology FS3 Front Stage Loudspeaker.

e FS3 contains the Le, Center and Right

video display either on a shelf, mounted on the

wall or attached to an articulating TV mount.

Each FS3 consists of a low resonance MDF cab-

inet, dual 3.5˝ CPP drivers, 3/4˝ silk dome tweeter

and high quality crossover components for each

of the three front channels. e FS3 is designed

for use with all surround formats such as Dolby

Digital, DTS or Dolby Atmos.

Con

ConConnec

nec

necnecting

ting

ting ting Y

YYour Sy

our Sy

our Syour System

stem

stemstem

We recommend that you connect your FS3

speaker systems with high quality dual conduc-

tor stranded wire of 18 gauge or larger, for

lengths up to 25 feet. Use 16 gauge dual conduc-

tor or larger for longer runs of wire. Contact

your local audio/video specialist for specic

cable recommendations and further informa-

tion for special circumstances.

Warning: To prevent risk of electrical shock

or damage to your equipment, always

switch oﬀ the amplier or receiver when

making connections to the speaker.

You can connect your FS3 speakers by using a

variety of audio connectors, or you can:

Strip about 1/2˝ (13mm) of insulation from the

connecting insulation from the connecting wires.

Connect them to the appropriate push terminal,

being careful to observe polarity (positive to the

red terminal, negative to the black terminal).

Whether you are connecting a complete FS3

system, or adding a single speaker component

to your present system, the wiring should look

like the diagram in Figure 2.

Figure 1: Gold plated spring binding posts

accept up to 14 gauge bare wire.

You can also

wall mount the

speaker using the

keyhole brackets

built into the back

of the speaker. Be sure

to anchor the speaker

properly to avoid damaging

your walls or the speaker.

e Shelf-2405 is another great

option for the FS3. e Shelf-2405

is a kit that consists of a pair of metal

shelves that t on top of a at panel display.

Check out www.atlantictechnology.com

under “soundbars” for more information.

Pla

PlaPlace

cecemen

men

menment a

t a

t at and

ndnd

Ope

OpeOperati

rati

ratiratio

oon

e slim prole design of the FS3 allows it to easily blend in when mounted

above or below a at panel display. e speaker can be mounted most simply by

using the 4 self-adhesive feet included in the accessory bag, and placing the speaker

on a sturdy shelf or table.

FS3 shown on the

Shelf-2405.

Produkt Specifikationer

Mærke:	Atlantic
Kategori:	Højttaler
Model:	FS3

Har du brug for hjælp?

Hvis du har brug for hjælp til Atlantic FS3 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Højttaler Atlantic Manualer

Atlantic LCR2 Manual

22 September 2024

Atlantic 4400 THX Select Manual

5 September 2024

Atlantic TLC-8.2 Manual

28 Juli 2024

Atlantic IWTS-10 LCR Manual

26 Juli 2024

Atlantic H-PAS PowerBar 235 Manual

19 Juli 2024

Atlantic 2400 Manual

2 Marts 2024

Atlantic H-PAS AT-1 Manual

15 September 2023

Atlantic FS-7.1 Manual

31 August 2023

Atlantic FS3 Manual

13 Februar 2023

Atlantic IC-6.3-S Manual

3 December 2022

Højttaler Manualer

Nyeste Højttaler Manualer

Diamond Audio DES69C Manual

15 Juni 2025

Defender Enjoy S1000 Manual

15 Juni 2025

Diamond Audio DMD652 Manual

15 Juni 2025

Rebeltec Rodos Manual

15 Juni 2025

Sanag M7 Manual

15 Juni 2025

GeekLJT LYYX-2AS Manual

15 Juni 2025

Defender Enjoy 20 Manual

15 Juni 2025

Rad Golf Sound Pro Manual

15 Juni 2025

Frewico X10 Manual

15 Juni 2025

Teufel Mynd Manual

15 Juni 2025