Audibax Ground Sub 10T Manual

Audibax Højttaler Ground Sub 10T

Læs gratis den danske manual til Audibax Ground Sub 10T (4 sider) i kategorien Højttaler. Denne vejledning er vurderet som hjælpsom af 27 personer og har en gennemsnitlig bedømmelse på 3.7 stjerner ud af 14 anmeldelser. Har du et spørgsmål om Audibax Ground Sub 10T, eller vil du spørge andre brugere om produktet?

Side 1/4
Ground SUB10T
Please read the manual before using the product
USER´S
MANUAL
3
Ground SUB10T
SPECIFICATIONS
CARE AND MAINTENANCE
Make sure to turn all equipment off before cleaning. The cabinet only needs
occasional dusting. Please do not touch the drive units. Do not clean the
speaker with chemical solvents as this may damage the paint surface. Clean
with a dry cloth.
3.
MODEL
Ground SUB10T
Woofer
10''Polypropylene
Cone
RMS Power
150W
Frequency
Response(±3dB)
50Hz-300Hz
Nominal
Impedance
4
Sensitivity 86
IP Level
IP 65
Product
Dimension(mm)
310x420x420
(12.2"x16.5"x16.5")
1/4"
(6.35mm)
screws
Ground SUB10T USER´S
MANUAL
1 2
SAFETY INSTRUCTIONS
1. Please read the instructions carefully before installation and use. Keep the manual
safe for future reference.
2. When installing Ground SUB10T speaker outside do not submerge or place them in
direct contact with water (e.g., ponds, waterfalls, fountains).
3. Damage to the woofer may occur if the speaker is dropped or hit - resulting in no
sound or distorted sound.
4. Use only approved and certified wiring in your installation, do not stretch or place
the wire in contact with sharp objects.
5. Never overdrive your speakers to the point of distortion and always reduce volume
prior to switching input sources (e.g., FM to CD).
6. Prior to removing cables ensure all power to your amplifier and other components
is turned OFF.
7. Turn off the power to the speaker when unused for long periods of time.
PACKING LIST
subwoofer
subwoofer
user manual
security eyebolt
security eyebolt
wire nuts X2
wire nuts
Wire nuts for connecting wires
keyholes slots
keyholes slots
screws X2
INSTALLATION
Deck mount
1. Determine where you want to locate the subwoofer.
2. Measure the center-to-center distance between the key-hole slots and install two
mounting screws into the deck, leaving 1/4" of the screws exposed above the
surface.
3. Place the subwoofer onto the pan head screws and rotate the Ground SUB10T
clockwise so that the keyhole slots lock down onto the pan head screws.
Garden Placement
You may locate Ground SUB10T anywhere you can run speaker wire. If you place
your subwoofer in a garden bed, on grass, mulch or upon soft ground, we
recommend you place it on a paver or other hard surface and remove all gravel or
debris prior to installation. This will prevent plants, weeds, mulch or dirt from
building-up underneath the subwoofer, which must remain clear for optimum
performance and to prevent damage to driver.
Note: For anti-theft security and permanent placement the Ground SUB10T has a
built-in eyebolt that enables you to anchor it to its location.
1.
2.


Produkt Specifikationer

Mærke: Audibax
Kategori: Højttaler
Model: Ground Sub 10T

Har du brug for hjælp?

Hvis du har brug for hjælp til Audibax Ground Sub 10T stil et spørgsmål nedenfor, og andre brugere vil svare dig