1 10
*Built-in 16 bit DSP processor
*Built-in Bluetooth connect with mobile phone or other Bluetooth player
*Built-in MP3 player support a variety of formats music
*Connect the computer to record and play music
1.4/6/8 channels mixer 2.Mic + stereo line inputs
3.Ultra-musical 3-band EQ on all channels 4.Peak LED on all Channels
5.High accurate level indicator 6.Phantom power switch (+48V)
7.Sealed rotary controls to resist dust and grime 8.Rugged steel chassis
9.New Multi-Voltage power supply for worldwide use
CHANNEL INPUT
1.[MIC] Input, use this socket to connect the microphone of BALANCED XLR PLUG.
2. [LINE] Input, connect the microphone, musical instrument or audio device (CD
player and so on) to the device. The socket is supporting UNBALANCED 1/4"
PLUG.
3. [INSERT] Input, can be inserted into a mono channel of compressor or equalizer.
4. [GAIN] Controller, determines the basic volume of each channel, adjust them
for the maximum volume performance, when the volume gets too loud, the
[PEAK]LED (9) indicator light will keep flashing.
5. [HIGH] Treble tone controller, adjust the controller to enhance or attenuate for
15dB at 12KHz.
6.[MID] Alto tone controller, adjust the controller to enhance or attenuate for
15dB at 2.5KHz.
7.[LOW] Bass tone controller, adjust the controller to enhance or attenuate for
15dB at 80Hz.
8.[FX] Controller, adjust the signal level from the channel to the reverberation line.
Please note, the single level will vary with the different setting of the channel
attenuator. If using the stereo channel, will mix the signals from L and R channels,
then, send it to reverberation line.
4 CHANNEL 6 CHANNEL 8 CHANNEL
1. The external power input socket, receiving external power supply, DC +15V, -15V, +48V,
ground wire
2. Power Switch
GENERAL SPECIFICATIONS
MP3 MODULE FUNCTION
A .USB insert
B.The power indicator
C.Play or Pause
D.Select to play next song
1
2
3
4
5
6
7
8
9
10
1
2
A B C D E