Audio-Technica AE3300 Manual

Audio-Technica Mikrofon AE3300

Læs gratis den danske manual til Audio-Technica AE3300 (2 sider) i kategorien Mikrofon. Denne vejledning er vurderet som hjælpsom af 30 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 15.5 anmeldelser. Har du et spørgsmål om Audio-Technica AE3300, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

User Manual

Cardioid Condenser Handheld Microphone AE3300

■Features

■Notes on use

■Connection procedure

This product requires 48 V

DC phantom power.

Outp n sut termi al

PIN1 (ground)

PIN3

(cold)

PIN2 (hot)

■Speciﬁcations

Fixed-charge back plate, permanently polarized condenser

Cardioid

30 - 18,000 Hz

80 Hz, 12 dB/octave

-42 dB (7.9 mV) re 1V at 1 Pa

150 ohms

147 dB SPL, 1 kHz at 1% T.H.D.

157 dB SPL, with 10 dB pad (normal)

19 dB SPL

128 dB, 1 kHz at Max SPL

75 dB, 1 kHz at 1 Pa

11-52 V DC, 3 mA typical

High-pass ﬁlter,

10 dB pad (normal)

Integral 3-pin XLRM-type

• 1 Pascal = 10 dynes/cm2 = 10 microbars = 94 dB SPL

* Typical, A-weighted, using Audio Precision System One.

■P r atternola p

■Fr r o eequency esp ns

180°

150°

120°

30°

0°

330°

300°

270°

240°

210°

Audio-Technica Corporation

2-46-1 Nishi-naruse, Machida, Tokyo 194-8666, Japan

Global Support Contact: www.at-globalsupport.com

09-DEC--2020 Form No.ATGC-L0388-20

LEGEND

0°, 50cm

SCALE IS 5 DECIBELS PER DIVISION

LEGEND

200 Hz

1 kHz

5 kHz

8 kHz

Thank you for purchasing this product. Before using the product, read through the user

manual to ensure that you will use the product correctly.

Please keep this manual for future reference.

With pristine audio quality, ultra-low handling noise, and high-frequency clarity, AE3300

gives voice to the subtleties of vocal performance. This cardioid condenser vocal microphone

features the condenser element used in the legendary AT4033 and proven in the world's

ﬁnest recording studios. The hardened-steel outer grille is lined with ﬁne steel mesh and a

layer of open-cell foam for ultimate protection against vocal plosives without compromising

high-frequency clarity. Its superior anti-shock engineering ensures low handling noise and

quiet performance. For exceptional performance. For exacting detail. For brilliant clarity:

AE3300. it's the new standard in live audio.

When using the AE3300 in settings with a stage monitor speaker, the speaker should be

located 180° oﬀ axis (at rear of the microphone). This placement, in conjunction with the

microphone's uniform cardioid pickup pattern, will virtually eliminate the possibility of

undesired audio feedback.

An integral 80 Hz hi-pass ﬁlter provides easy switching from a ﬂat frequency response to a

low-end roll-oﬀ. The roll-oﬀ position reduces the microphone’s sensitivity to popping in close

vocal use. It also reduces the pickup of low-frequency ambient noise (such as traﬃc,

air-handling systems, etc.), room reverberation and mechanically-coupled vibrations.

Avoid leaving the microphone in the open sun or in areas where temperatures exceed 43°C

for extended periods. Extremely high humidity should also be avoided.

Connect e as a microphone the output terminals of the microphone to a d vice that h

input (balanced input) compatible with a phantom p er supply. The output connector ow

is an XLRM-type with polarity as shown in the ﬁgure below.

For product improvement, the product is sublect to modiﬁcation without notice.

• Exceptional performance for exceptional performers

• Same element as the classic AT4033 studio microphone

• Superior anti-shock engineering ensures low handling noise and quiet performance

• Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving

isolation of desired sound source

• Multi-stage grille design oﬀers excellent protection against plosives and sibilance without

compromising high-frequency clarity

• Robust all-metal design for enduring dependability on the road

• Integral 80 Hz HPF switch and 10 dB pad

■Safety precaution

■Cautions for the product

Although this product was designed to be used safely, failing to use it correctly may result in

an accident. To ensure safety, observe all warnings and cautions while using the product.

• Do not subject the product to strong impact to avoid malfunction.

• Do not disassemble, modify or attempt to repair the product.

• Do not handle the product with wet hands to avoid electric shock or injury.

• Do not store the product under direct sunlight, near heating devices or in a hot, humid or

dusty place.

Element

Polar pattern

Frequency response

Low Frequency response

Open circuit sensitivity

Impedance

Maximum input sound level

Noise

Dynamic range (typical)

Signal-to-noise ratio

Phantom power requirements

Switch

Output connector

Roll-oﬀ

300 g

179.0 mm long, 50.0 mm head diameter,

33.0 mm to 22.0 mm tapered body diameter

Weight (less accessories)

Dimensions

Included accessories AT8470 Quiet-Flex stand clamp for 5/8"-27 threaded stands;

soft protective pouch

60°

90°

Response in dB

Frequency in Hertz

-10

-20

-30

50010050 200 10k5k1k 2k 20k

10 dB

心形指向手持电容话筒 AE3300

本产品使用直流 48V 幻象电源。

输出端子

针脚1（接地）

针脚3

（负）

针脚2（正）

■规格

固定充电背板，静电型电容式

心形指向性

30 - 18,000 Hz

80 Hz，12 dB/octave

-42 dB（7.9mV) 以 1V 于 1Pa

150 欧姆

直流 11-52V，3mA 典型

低截滤波，10 dB 衰减

元件

指向性

频率响应

高通滤波

开路灵敏度

输出阻抗

147 dB 声压, 1 kHz 于 1% T.H.D.

157 dB 声压, 于 10 dB 衰减 (正常)

19 dB 声压

最大承受声压

噪声

幻象供电

开关

• 1 帕＝ 10 达平方厘米＝ 10 微巴＝ 94 dB SPL因 /

* 典型，A 计权，使用 Audio Precision System One

因产品改进，本产品会随时改装，恕不另行通知。

■指向性

■频率响应

Audio-Technica Corporation

2-46-1 Nishi-naruse, Machida, Tokyo 194-8666, Japan

全球支持联系：www.at-globalsupport.com

响应单位是 dB

频率单位是赫兹

图例

0°，厘米50

比例是每分隔线 5 分贝

图例

200 赫兹

1 千赫兹

5 千赫兹

8 千赫兹

用戶手冊

感谢您购买本产品。在使用产品之前，请全文浏览本用户手册以确保您将正确地

使用本产品。请妥善保存本手册，以供将来参考。

■产品特点

• 为杰出表演者提供卓越的收音表现

• 与经典 AT4033 录音棚话筒使用相同的收音元件

• 出色的防震结构以确保更低的手持噪声

• 心形指向性减少了从侧面和后方的声音拾取，改善了对所需声源的隔离

• 多层式保护网格栅在不影响高频清晰度的情况下提供了防爆破音和稳定性保护

• 坚固的全金属主体设计，坚固耐用

• 内置 80Hz 高通滤波器及 10dB 衰减

■使用注意事项

AE3300具有朴实的音频质量，更低的手持噪声和高频清晰度，与传奇的AT4033

录音棚话筒采用相同的电容收音元件，提供更微妙的人声收音效果，并在世界各

地的录音棚中得到验证。强化的钢制外格栅保护衬有细钢丝网和一层开孔海棉，

可在不影响高频清晰度的情况下提供了出色的防爆破音保护。其卓越的抗震技术

可确保防止手持噪音和静音性能。表现更出色、收音更细致、音色更清晰，这是

AE3300现场演出的新标准。

在设置有监听音箱的舞台中使用 AE3300 时，音箱应位于话筒偏离轴180°的位置

（即话筒的后方）。这种放置方式与话筒的心形指向收音方式相结合，能在无形

中消除不希望有的音频反馈声。

内置低截滤波电路，可轻易由平直的频率响应，开启为于 80Hz 以下衰减的收音效

果，应用低截滤波器可减低话筒在近距离讲话收音时的喷气声，并可减低收音环

境中低频噪声(如外间汔车引擎声，空调系统的风声等)，房间中的回声及机械性的

震动声。

把话筒暴露于高温中可能导致输出电平逐渐及永久性减弱，应避免将话筒留在日

晒的地方或长时间置于温度超过43°C的地方，而极高湿度也应避免。

■连接步骤

将话筒的输出端子连接到具有兼容幻象电源的话筒输入（平衡输入）的设备。输

出接口是XLRM型接口，其极性如下图所示。

09-DEC-2020 Form No.ATGC-L0388-20

■安全预防措施

■本产品注意事项

虽然本产品采用安全设计，但使用不当仍可能发生事故。为了确保安全，使用本

产品时请注意全部警告和提醒。

• 切勿让本产品遭受强烈冲击，以避免发生故障。

• 切勿拆开、改装或尝试维修本产品。

• 切勿用湿手握持本产品，以免触电或受伤。

• 切勿将本产品存放在阳光直射的地方、加热装置附近或者炎热、潮湿或多尘的

地方。

高通滤波

128 dB, 1 kHz 于最高声压

75 dB, 1 kHz 于 1 Pa

动态范围 (典型)

信噪比

内置式 3 针卡农公头输出端子

300 克

长度 179.0 mm, 保护网直径 50.0 mm

锥形话筒身直径 33.0 mm 至 22.0 mm

重量

(不含配件)

尺寸

附带配件 AT8470 Quiet-Flex 防震式 5/ -27 接头话筒夹;8＂

保護袋