Audio-Technica AT4060 Manual

Audio-Technica Mikrofon AT4060

Læs gratis den danske manual til Audio-Technica AT4060 (4 sider) i kategorien Mikrofon. Denne vejledning er vurderet som hjælpsom af 53 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 27 anmeldelser. Har du et spørgsmål om Audio-Technica AT4060, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

CARDIOID VACUUM TUBE

CAPACITOR STUDIO MICROPHONE

AT4060

The AT4060 is a cardioid vacuum tube capacitor microphone

designed for use in the most demanding studio applications. It

utilizes dual, gold-plated and aged, large-diaphragm elements for

extended frequency response. The AT4060 has a wide dynamic

range of 131 dB and the ability to accept up to 150 dB SPL without

capsule or electronic-system distortion above 1% T.H.D. These

capabilities, coupled with the benefits of exceptionally low self-noise

and very high output, combine in a versatile microphone that meets

the diverse requirements of contemporary recording situations,

while still providing the warm sound of vintage valve design.

The AT4060 is the culmination of extensive field evaluations in

studio environments with resultant significant advances in micro-

phone performance factors. Each hand-selected tube is individually

aged and tested, then employed in a uniquely-configured circuit for

enhanced tube performance. Specially-tuned elements improve

dynamic range and the ability to handle high SPLs without sacrific-

ing high-frequency characteristics. Floating-construction mounting

of the elements provides isolation from noise and vibration.

The AT4060 incorporates a dual-diaphragm configuration that

allows undistorted reproduction of high sound pressure level

signals at all frequencies. The 2-micron-thick, vapor-deposited gold

diaphragms provide accurate reproduction of even the most subtle

sounds, especially high-frequency signals not easily reproduced by

conventional large-diaphragm condenser transducers. For a warm,

true-to-life quality, the dual, large-diaphragm design provides

remarkable low-frequency performance.

The diaphragm of every AT4060 is aged through five different

steps to assure the optimum characteristics achieved will remain

constant over years of use.

The symmetrical housing assembly surrounding the microphone

capsule and its open acoustical environment allow the off-axis

response to be ideally suited for studio work where natural repro-

duction of off-axis sound is of paramount importance.

The AT4060 operates in conjunction with the included AT8560

power supply. The power supply has low-impedance output

(3-pin XLRM-type connector) and a ground-lift switch. Mains voltage

(120V or 230V AC) is selectable via a switch on the back of the unit.

The AT4060 includes an AT8447 shock mount to provide

mechanical isolation and secure mounting. This effective shock

mount fits 5/ "-27 threaded stands. A stand clamp without shock8

mount, the AT8430, is available as an optional accessory.

As with any sophisticated vacuum tube equipment, the AT4060

requires a period of warm-up time before use. Allow at least 15

minutes after switching on the power supply for the unit’s electronics

to stabilize.

Always turn the power supply off while connecting or discon-

necting any cables.

The microphone shall be a dual-element vacuum tube capaci-

tor-type with a cardioid polar pattern and a frequency response of

20 Hz to 20,000 Hz. It shall operate from an external AT8560 power

supply (included) capable of operating from either 120V or 230V AC.

The dual elements shall be internally shock mounted.

Nominal open-circuit output voltage shall be 19.9 mV at 1 kHz, 1

Pascal. The output impedance shall be 200 ohms and output shall

be balanced. The microphone shall accept a 150 dB SPL at 1 kHz

while producing no greater than 1% T.H.D.

A 32.8' (10 m) cable with 6-pin XLR-type connectors shall be

supplied for connection between the microphone and power supply.

The microphone shall have a length of 8.27" (210.0 mm), a

maximum body diameter of 2.10" (53.4 mm), and a weight of 22.6 oz

(640 grams). Finish shall be matte black. A separate AT8447 shock

mount and rack-mount adapters for the power supply shall be

included.

The Audio-Technica AT4060 is specified.

Description

Operation

Architects and Engineers Specifications

40 SERIES PRECISION MICROPHONES

Produkt Specifikationer

Mærke:	Audio-Technica
Kategori:	Mikrofon
Model:	AT4060

Har du brug for hjælp?

Hvis du har brug for hjælp til Audio-Technica AT4060 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Mikrofon Audio-Technica Manualer

Audio-Technica ATW-CHG3AAD Manual

15 Oktober 2025

Audio-Technica ATW-2129CI Manual

29 August 2025

Audio-Technica ATM350UcH Manual

2 August 2025

Audio-Technica BP899LcH Manual

2 August 2025

Audio-Technica ATM350GL Manual

2 August 2025

Audio-Technica System 10 Stompbox ATW-1501 Manual

2 August 2025

Audio-Technica BP892c Manual

2 August 2025

Audio-Technica AT882TL Manual

2 August 2025

Audio-Technica ATM350SL Manual

2 August 2025

Audio-Technica System 20 PRO Manual

17 Juli 2025

Mikrofon Manualer

Nyeste Mikrofon Manualer

Blue enCORE 100 Manual

5 November 2025

Nady SP-4C Manual

4 November 2025

Nady SCM 800 Manual

4 November 2025

Nady SP-R3 Manual

4 November 2025

Phenyx Pro PTU-7000A Manual

4 November 2025

JARO J100-CS Manual

4 November 2025

MayBesta WM150 Manual

3 November 2025

XIAOKOA N80-B Manual

3 November 2025

Singing Machine CPK565 Manual

3 November 2025

Shaevle SW-16 Manual

3 November 2025