Audio-Technica MT828a Manual

Audio-Technica Mikrofon MT828a

Læs gratis den danske manual til Audio-Technica MT828a (2 sider) i kategorien Mikrofon. Denne vejledning er vurderet som hjælpsom af 13 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 7 anmeldelser. Har du et spørgsmål om Audio-Technica MT828a, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

SUBMINIATURE CARDIOID CONDENSER CLIP-ON MICROPHONE

- Maximum intelligibility and clean, accurate reproduction for lecturers,

stage and television talent, and worship leaders.

- Low-prole design is ideal for applications requiring minimum visibility.

- Includes a wire clothing clip and a metal-frame pop lter.

- MT828a is switchable for low-frequency roll-off reduces sensitivity to

popping in close vocal use.

- MT828a can be operated on battery or phantom power.

- MT828cW is terminated for use with all Audio-Technica UniPak™

wireless systems.

The MT828a / MT828cW is worn on the clothing of performers for

excellent yet unobtrusive sound pickup. Its small size makes the

microphone ideal for use in applications where minimum visibility is

required. Close-up voice pickup is crisp and clean, yet full sounding,

while suppression of background noise and undesired audio feedback

are signicantly improved over that of full-size cardioid microphones.

The included clothing clip and metal-frame pop filter are removable.

When using the MT828a / MT828cW in extremely close situations, slip

the included metal-frame pop lter over the mic to reduce wind noise or

“poping”.

MT828a

Includes a power module AT8531 that requires 11V to 52V DC phantom

power, or a 1.5V AA battery for operation. A battery need not be in place

for phantom power operation.

An integral 80Hz high-pass filter provides easy switching from a flat

frequency response to a low-end roll-off. The roll-off position reduces

the pickup of low-frequency ambient noise (such as trafc, air-handling

systems, etc.), room reverberation and mechanically coupled vibrations.

Output from the power module’s XLRM-type connector is low impedance

(Lo-Z) balanced. The signal appears across Pins 2 and 3; Pin 1 is ground

(shield). Output phase is “Pin 2 hot” - positive acoustic pressure produces

positive voltage at Pin 2. To avoid phase cancellation and poor sound, all

mic cables must be wired consistently: Pin 1-to-Pin 1, etc.

MT828cW

Less power module and includes clothing clip and metal-frame pop lter

only. 1.6 m cable terminated with locking 4-pin connector for Audio-

Technica UniPak™ body-pack wireless transmitters.

Avoid leaving the microphone in the open sun or in areas where

temperatures exceed 40°C for extended periods. Extremely high humidity

should also be avoided.

FORM No. ATGC-L0073-07-E

Machida • Tokyo • Japan

SPECIFICATIONS

ELEMENT Fixed-change back plate permanently

polarized condenser

POLAR PATTERN Cardioid

FREQUENCY RESPONSE 100-12,000 Hz

OPEN CIRCUIT SENSITIVITY -64 dB (0.63 mV) re 1V at 1 Pa (capsule)

IMPEDANCE 1600 ohms (capsule)

OPERATING VOLTAGE 1-10V DC (capsule)

LOW FREQUENCY ROLL-OFF (MT828a)80 Hz, 12 dB/octave

PHANTOM POWER REQUIREMENTS 11-52V DC, 2 mA typical (MT828a)

BATTERY TYPE 1.5V AA (MT828a)

BATTERY CURRENT / LIFE 2.0 mA / 1200 hours (MT828a)

SWITCHES (MT828a)Flat, roll-off

WEIGHT (less cable and accessories)

MICROPHONE

POWER MODULE (AT8531)

7.5 g

81.2 g

DIMENSIONS

MICROPHONE

POWER MODULE (AT8531)

19.4 mm - long,

7.3 mm - diameter

83.0 mm - H x 63.0 mm - W x

22.0 mm - D

OUTPUT CONNECTOR

MT828a (AT8531)

MT828cW

Integral 3-pin XLRM-type

locking 4-pin connector for UniPak™

CABLE 1.6 m long (permanently attached to

microphone), 2 mm diameter

ACCESSORIES FURNISHED Wire clothing clip;

metal-frame pop lter;

protective pouch.

AT8531 power module (MT828a)

10 dB

20k10k5k2k1k50020010050

8 kHz

200 Hz

1 kHz

5 kHz

0°

330°

300°

270°

240°

210°

180°

150°

120°

90°

60°

30°

Polar Pattern

Frequency Response

SCALE IS 5 DECIBELS PER DIVISION

LEGEND

Frequency in Hertz

LEGEND 12” or more on axis

Response in dB

Roll-off (MT828a)

Produkt Specifikationer

Mærke:	Audio-Technica
Kategori:	Mikrofon
Model:	MT828a

Har du brug for hjælp?

Hvis du har brug for hjælp til Audio-Technica MT828a stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Mikrofon Audio-Technica Manualer

Audio-Technica ATW-CHG3AAD Manual

15 Oktober 2025

Audio-Technica ATW-2129CI Manual

29 August 2025

Audio-Technica ATM350UcH Manual

2 August 2025

Audio-Technica BP899LcH Manual

2 August 2025

Audio-Technica ATM350GL Manual

2 August 2025

Audio-Technica System 10 Stompbox ATW-1501 Manual

2 August 2025

Audio-Technica BP892c Manual

2 August 2025

Audio-Technica AT882TL Manual

2 August 2025

Audio-Technica ATM350SL Manual

2 August 2025

Audio-Technica System 20 PRO Manual

17 Juli 2025

Mikrofon Manualer

Nyeste Mikrofon Manualer

SE Electronics V7 ENG Manual

15 December 2025

Eurosound PRO3 Manual

11 December 2025

Philips SmartMeeting PSE0540 Manual

8 December 2025

Galaxy Audio EVO-PE0P1 Manual

8 December 2025

Galaxy Audio EVO-PE0D4 Manual

8 December 2025

Philips SmartMeeting PSE0501 Manual

7 December 2025

Galaxy Audio AS-ANTM3 Manual

7 December 2025

Galaxy Audio EVO-PEED4 Manual

7 December 2025

TOA S4.10-RXA Manual

6 December 2025

Savage Mobile Vlogging Kit Manual

5 December 2025