AudioControl ACR-4 Manual


Læs gratis den danske manual til AudioControl ACR-4 (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 39 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 20 anmeldelser. Har du et spørgsmål om AudioControl ACR-4, eller vil du spørge andre brugere om produktet?

Side 1/2
Maximum Processing with Minimal Eort
AudioControls new Matrix DSP processors
When you require total control and optimization to achieve great sound quality, AudioControl Dig-
ital Signal Processors are the solution. The powerful DM-810 and DM-608 DSP processors allow
users to truly optimize the performance of their audio system, regardless of whether they are using
a factory or aftermarket source, and to truly achieve our goal “Making Good Sound Great. These
highly versatile Digital Signal processors are equipped with key features, such as active speaker-lev-
el inputs, line-level and digital audio inputs, providing up to 10 channels of output. AudioControls
smart user interface contains the power of AudioControl processing through a flexible PC inter-
face packed full of features and simply laid out. Includes signal summing, 30 bands of equalization,
signal time-alignment, input delay and phase correction, plus AudioControl proprietary features
like AccuBASS®, GTO™ Signal Sense, and MILC™ as well as integrated input and output RTAs.
UPGRADE ACCESSORY
PRECISE AND TACTILE DUAL-KNOB REMOTE LEVEL CONTROL
REMOTE CAN BE FLUSH-MOUNTED FOR CUSTOM INSTALLATIONS
REMOTE LEVEL CONTROL
Add volume control to any system
The ACR-4 is a dual-knob remote level control designed to work with specific AudioControl processors. The ACR-4 can be surface or
custom-mounted to add discrete level and function control to your audio system. Installation is simple and no power is required.
REMOTE LEVEL CONTROL
8 50038 64723 0
22410 70th Ave West, Mountlake Terrace, WA 98043 USA
Phone 425-775-8461
www.audiocontrol.com
©2022 AudioControl. All rights reserved. P/N 912-081-0 Rev A
Placement And Mounting of the ACR-4
The ACR-4 may be mounted under a dash or console using its own
bracket or through custom mounting holes in the dash/console. It
should be within reach of the driver and in a spot where the LED is
plainly visible.
Bracket Installation
ACR-4 mounts with four screws, which attach to the underside of a
dashboard/console. Slide under the dash or console and place
the ACR-4 in its mounting position, mark the mounting
holes, drill pilot holes, and secure with screws.
Custom Installation
For that custom, finished look, the ACR-4 can be flush
mounted directly on the dash/console panel (or any-
where else). Referencing the drawing right, disassem-
ble the ACR-4. Drill a 9/32” (7 mm) hole in the panel for
the control along with a 3/32” (2.3 mm) hole for the lock
tab and a 1/8” (3 mm) hole for the LED. Reassemble the
ACR-4 components on the dashboard or console.
What’s Included?
ACR-4 Remote Level Control, 20’ Phone Cable (RJ-11)
Scan for
Compatible
Products


Produkt Specifikationer

Mærke: AudioControl
Kategori: Ikke kategoriseret
Model: ACR-4

Har du brug for hjælp?

Hvis du har brug for hjælp til AudioControl ACR-4 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret AudioControl Manualer

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Vulcan

Vulcan VBP15SL Manual

17 September 2025
Rocktrail

Rocktrail IAN 463536 Manual

17 September 2025
Kimo

Kimo KNT 320 Manual

17 September 2025
Vestil

Vestil LPRO-36-16-4 Manual

17 September 2025
Vestil

Vestil CPC-20 Manual

17 September 2025
Vestil

Vestil CANT-3648 Manual

17 September 2025
InLine

InLine 16277S Manual

17 September 2025
Vestil

Vestil H-75-LD Manual

17 September 2025