Aurora AS1018CD Manual

Aurora Papirmakulator AS1018CD

Læs gratis den danske manual til Aurora AS1018CD (2 sider) i kategorien Papirmakulator. Denne vejledning er vurderet som hjælpsom af 68 personer og har en gennemsnitlig bedømmelse på 3.6 stjerner ud af 34.5 anmeldelser. Har du et spørgsmål om Aurora AS1018CD, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

If the shredder continues to work after a shredding cycle and does not stop then this

is either;

1. The waste b is full. You should empty the b or compact the shredded paper. in in

2. Some paper is blocking the auto sensor, try clearing it by reversing and then

returning the switch to auto or by shredding some more paper.

3. Glue from envelopes or obstructing the sensor. You should not shred label’s is

gummed envelopes or sticky labels, try cleaning and lubricating the shredder with

Aurora SP1000 Lubrication and sharpening sheets.

Problem 3 The shredder has jammed whilst shredding –

Empty the waste bin and try reversing the unit to clear the jam.

If this does not work disconnect power, trim oﬀ paper above and below the jam,

reconnect power and try alternating between reverse and auto until the jam clears.

If at any point the shredder stops working during this process it has probably over

heated and will need to cool down for 60 minutes.

Please be careful not to exceed the maximum paper capacity and feed the paper in

straight, please be aware damage caused to the shredder by inserting too much

paper or by failing to shred using a straight paper path is classed as misuse and

invalidates your warranty.

Never attempt to clear paper jams by inserting implements into the shredder or by

opening the unit.

Warranty

Your Aurora shredder comes with a 12 months return to base warranty, please

contact your supplier for further details.

Aurora warrants all parts of the machine to be free from defects in materials and

workmanship for a period of 1 year from the date of the purchase by the original

consumer. If the shredder is found to be defective during the warranty period the

sole and exclusive remedy will be the repair or replacement at Aurora’s option and

expense.

Aurora Electronics (UK) Ltd disclaims any liability for incidental or consequential

damages attributable to the product. The liability of Aurora Electronics (UK) Ltd is

limited to the cost of the repair/replacement of the unit under warranty.

The warranty shall be immediately invalidated if unauthorized repairs or

modiﬁcations are made, if the machine has been abused or mishandled, if the

product has been re-sold, or if the product has not been operated in accordance

with the instructions contained in this document.

The warranty is in addition to and does not diminish the consumer’s statutory or

legal rights.

Aurora Electronics (UK) Ltd

Email: sales@aurora-ltd.co.uk

www.aurora-ltd.co.uk

User Manual for the AS1018CD Aurora Shredder

IMPORTANT!

READ ALL INSTRUCTIONS BEFORE USING

Thank you for purchasing the AS1018CD Paper Shredder. This product is designed to

shred paper and small staples it will also accept small paper clips, credit cards and

CD/DVD’s. It does not shred adhesive labels, self-seal envelopes, transparencies,

fabrics, glossy paper, newspaper, plastic (other than credit cards), cardboard or

continuous forms. Please note that using it for these purposes is likely to cause

damage and will invalidate your warranty. This paper shredder is not designed to shred

large volumes so please refer to the recommended usage capacity quoted below. You

may ﬁnd paper particles in the bin when ﬁrst opening the shredder this is a result of QC

testing procedures.

Recommended Daily Usage = 50 passes per day. (5 minutes on/ 20 minutes oﬀ)

Safety Instructions

1. Before use inspect the shredder, mains cable and plug for damage or defects.

2. Locate the shredder away from heat and water sources.

3. Ensure the switch is set to ‘off’ before connecting to the mains.

4. Always keep ties, loose clothing, jewelry and long hair away from the shredder.

5. Keep children and pets away from the shredder.

6. Disconnect from the mains when not in use or when emptying or cleaning.

7. Do not insert ﬁngers or objects into the shredder at any time.

8. Never attempt to dismantle the shredder for any reason, please return to an

authorized service agent for repair or servicing.

9. Never dispose of ﬂammable chemicals or materials that have come into contact with

ﬂammable chemicals (for example nail polish, acetone and petroleum) in the shredder

basket. Never use ﬂammable oils, petroleum based products or ﬂammable aerosols of

any kind in the vicinity of the machine including compressed air dusters.

Operational Instructions

1. Remove all packaging and install the shredder unit on top of the waste bin ensuring it

locates ﬁrmly in position. There is a safety cut out on the shredder head to prevent

operation when not safely located on the waste bin, the shredder will not operate

unless placed correctly on the waste bin. The shredder will only operate with the

waste bin provided.

2. Set the the shredder is now in stand by mode. switch to ‘Auto’, –

3. The shredder will start automatically when paper is fed into the paper entry slot.

4. Ensure paper entry is straight so to avoid curling as it enters the shredder.

5. Do not enter more sheets of paper than stated on the shredder at one time. Sheet

capacity is based on a paper thickness of 75 gsm. Thicker paper will reduce the amount

of sheets the shredder can shred in one go as, will the presence of staples or

paperclips

6. Do not operate continuously for more than 5 minutes

7. Prolonged shredding will cause the unit to overheat and shut down. This is not a fault

and indicates the unit has reached its maximum temperature tolerance, turn the unit oﬀ

at the mains and allow it to cool down for 60 minutes before resuming normal operation.

8. the amount of paper inserted is too much or is not fed in straight then the If

shredding speed will slow or even stop. If this happens stop shredding and use the

reverse function to clear the jam. Always ensure the waste bin is not full before

reversing.

9. To shred a credit card Insert the credit card in the entry slot on the shredder. –

You should only shred one credit card at a time. To destroy a CD Insert the CD –

into the middle of the entry slot which is marked ‘Maximum 1 CD’, the CD will be

cross cut into several pieces. You should only destroy one CD at a time.

Status Indicators

1. If the overload LED comes on turn power oﬀ and leave the shredder for

approximately 60 minutes before continuing to use.

2. If the misaligned LED comes on ensure that the shredder head is ﬁtted correctly

on the bin and the bin is not full.

Maintenance

1. Empty the waste frequently bin

2. Reversing the shredder often helps to clear a buildup of paper dust and particles,

always ensure the waste bin is not full before reversing.

FAQ & Troubleshooting

If you experience problems with your shredder please try some of the solutions

below, under no circumstance should you attempt to open the shredder unit, this will

expose you to a risk of electric shock and will invalidate your warranty.

Problem 1 The shredder fails to operate –

Is the shredder connected at the mains and is the power turned on?

Is the shredder switch set to ‘auto’?

Is the shredder located correctly on top of the basket? (Press down ﬁrmly on the –

shredder head to ensure it is in the correct position.)

Has the shredder over heated? (Turn oﬀ at the mains and leave to cool down for –

60 minutes then try again.)

Has the shredder blown a fuse? (Turn oﬀ at the mains and try replacing the fuse in –

the mains plug.)

Problem 2 The shredder will not stop working –

The shredder is designed to operate for a couple of seconds after paper has cleared

the machine this is normal and helps clear paper through the cutting heads. –

3. It is not essential to oil an Aurora

shredder however regular lubrication will

extend the life of your shredder, prevent

an increase in noise and help to keep

the shredder in optimum working

condition. We recommend using the

‘Aurora SP1000 Shredder Lubrication

and Sharpening sheets’ at least once

a month to keep your shredder blades

lubricated and free from a buildup of

paper dust. The Aurora SP1000 sheets

also contain a special grinding

powder that will keep your shredder

blades sharp. These are available from

your supplier in packs of 12.

Produkt Specifikationer

Mærke:	Aurora
Kategori:	Papirmakulator
Model:	AS1018CD

Har du brug for hjælp?

Hvis du har brug for hjælp til Aurora AS1018CD stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Papirmakulator Aurora Manualer

Aurora ShredSafe AU1050XE Manual

21 August 2024

Aurora AS424C Manual

20 August 2024

Aurora AS1023CD Manual

20 August 2024

Aurora ShredSafe AU740XA Manual

20 August 2024

Aurora AU870MA Manual

20 August 2024

Aurora AS610C Manual

20 August 2024

Aurora AS1018CD Manual

20 August 2024

Aurora AS800CD Manual

20 August 2024

Papirmakulator Manualer

Nyeste Papirmakulator Manualer

Anova BIO150D Manual

3 April 2025

Ideal 4004 Manual

3 Marts 2025

Honeywell 9316DS Manual

10 Februar 2025

Fellowes Powershred 325Ci Manual

12 Januar 2025

Fellowes Powershred LX25M Manual

12 Januar 2025

Olympia PS 53 CC Manual

11 Januar 2025

GBC AutoFeed+ 100M Manual

4 Januar 2025

GBC ShredMaster SM15-08 Manual

4 Januar 2025

GBC ShredMaster SX20-08 Manual

4 Januar 2025

GBC ShredMaster PX08-04 Manual

4 Januar 2025