Aurora AS800CD Manual

Aurora Papirmakulator AS800CD

Læs gratis den danske manual til Aurora AS800CD (2 sider) i kategorien Papirmakulator. Denne vejledning er vurderet som hjælpsom af 18 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 9.5 anmeldelser. Har du et spørgsmål om Aurora AS800CD, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Problem 2 The shredder will not stop working –

The shredder is designed to operate for a couple of seconds after paper has cleared the

machine this is normal and helps clear paper through the cutting heads. –

If the shredder continues to work after a shredding cycle and does not stop then this is

either;

1. The waste bin is full. You should empty the b or compact the shredded paper. in

2. Some paper is blocking the auto sensor, try clearing it by reversing and then returning

the switch to auto or by shredding some more paper.

3. Glue from envelopes or label’s is making the sensor lever stick. You should not shred

gummed envelopes or sticky labels, try cleaning and lubricating the shredder with Aurora

SP1000 Lubrication and sharpening sheets, see above.

Problem 3 The shredder has jammed whilst shredding –

Empty the waste bin and try reversing the unit to clear the jam.

If this does not work disconnect power, trim oﬀ paper above and below the jam,

reconnect power and try alternating between reverse and auto until the jam clears.

If at any point the shredder stops working during this process it has probably over heated

and will need to cool down for 60 minutes.

Please be careful not to exceed the maximum paper capacity and feed the paper in

straight, please be aware damage caused to the shredder by inserting too much paper or

by failing to shred using a straight paper path is classed as misuse and invalidates your

warranty.

Never attempt to clear paper jams by inserting implements into the shredder or by

opening the unit.

Warranty

Your Aurora shredder comes with a 12 months return to base warranty, please contact

your supplier for further details.

Aurora warrants all parts of the machine to be free from defects in materials and

workmanship for a period of 1 year from the date of the purchase by the original

consumer. If the shredder is found to be defective during the warranty period the sole

and exclusive remedy will be the repair or replacement at Aurora’s option and expense.

Aurora Electronics (UK) Ltd disclaims any liability for incidental or consequential

damages attributable to the product. The liability of Aurora Electronics (UK) Ltd is limited

to the cost of the repair/replacement of the unit under warranty.

The warranty shall be immediately invalidated if unauthorized repairs or modiﬁcations are

made, if the machine has been abused or mishandled, if the product has been re-sold, or

if the product has not been operated in accordance with the instructions contained in this

document.

The warranty is in addition to and does not diminish the consumer’s statutory or legal

rights.

Aurora Electronics (UK) Ltd

Email: sales@aurora-ltd.co.uk

www.aurora-ltd.co.uk

IMPORTANT

Please ensure the shredder head is placed on the bin correctly. The safety cut out will prevent the

shredder from operating if the bin is the wrong way around or is not placed correctly on the waste bin.

Ensure the viewing window of the waste bin faces forward and the shredder head is placed on the bin

as shown in ﬁgure 1.

The safety cut out is on the back of the shredder, the semi circular recess on the waste bin must slot

inside the semicircular shape on the back of the shredder head to deactivate the safety cut out.

Please ensure the semicircular recess on the bin is not outside the shredder head or that the shredder

head is not resting on top of the semicircular recess on the bin. When correctly ﬁtted there should be

no gap between the shredder head and the waste bin, and the ﬁtting should be ﬂush all around the

shredder.

User Manual for the AS800CD Aurora Shredder

IMPORTANT!

READ ALL INSTRUCTIONS BEFORE USING

Thank you for purchasing the AS800CD Paper Shredder. This product is designed to

shred paper and small staples it will also accept small paper clips, credit cards and

CD/DVD’s. It does not shred adhesive labels, self-seal envelopes, transparencies,

fabrics, glossy paper, newspaper, plastic (other than credit cards), cardboard or

continuous forms. Please note that using it for these purposes is likely to cause

damage and will invalidate your warranty. This paper shredder is not designed to shred

large volumes so please refer to the recommended usage capacity quoted below. You

may ﬁnd paper particles in the bin when ﬁrst opening the shredder this is a result of QC

testing procedures.

Recommended Daily Usage = 50 passes per day. (2 minutes on/ 30 minutes oﬀ)

Safety Instructions

1. Before use inspect the shredder, mains cable and plug for damage or defects.

2. Locate the shredder away from heat and water sources.

3. Ensure the switch is set to ‘off’ before connecting to the mains.

4. Always keep ties, loose clothing, jewelry and long hair away from the shredder.

5. Keep children and pets away from the shredder.

6. Disconnect from the mains when not in use or when emptying or cleaning.

7. Do not insert ﬁngers or objects into the shredder at any time.

8. Never attempt to dismantle the shredder for any reason, please return to an

authorized service agent for repair or servicing.

9. Never dispose of ﬂammable chemicals or materials that have come into contact with

ﬂammable chemicals (For example nail polish, acetone and petroleum) in the shredder

b . Never use ﬂammable oils, petroleum based products or ﬂammable aerosols of any in

kind in the vicinity of the machine including compressed air dusters.

Operational Instructions

1. Remove all packaging.

2. Place the shredder head onto the waste bin ensuring the viewing window of the

waste bin faces forwards. IMPORTANT There is a safety cut out on the shredder –

head to prevent operation when not safely located on the waste bin, the

shredder will not operate unless placed correctly on the waste bin. The shredder

will only operate with the waste bin provided.

3. Set the switch to ‘Auto’ so the shredder is in stand–by mode.

4. The shredder will start automatically when paper is fed into the paper entry slot.

5. Ensure paper is fed in using a straight paper path, avoid feeding paper at an angle

as this will cause the paper to curl and fold as it enters the shredder, multiplying the

number of sheets passing through the blades and is likely to result in a jam.

6. Do not enter more sheets of paper than stated on the shredder at one time. Sheet

capacity is based on a paper thickness of 75gsm. Thicker paper will reduce the amount

of sheets the shredder can shred in one go, as will the presence of staples or

paperclips.

7. Do not operate continuously for more than 2 minutes.

8. Prolonged shredding will cause the unit to overheat and shut down. This is not a

fault and indicates the unit has reached its maximum temperature tolerance, turn the

unit oﬀ at the mains and allow it to cool down for 60 minutes before resuming normal

operation.

9. If the amount of paper inserted is too much or is not fed in straight then the

shredding speed will slow or even stop. If this happens stop shredding

and use the reverse function to clear the jam. Always ensure the waste b is not full in

before reversing.

10. To shred a credit card Insert the credit card into the centre of the entry slot on the –

shredder. You should only shred one credit card at a time. To destroy a CD Lift up the –

clear plastic cover on the separate slot which is marked ‘Maximum 1 CD’ and insert the

CD; the CD will be strip cut into several pieces. You should only destroy one CD at a

time.

Maintenance

1. Empty the waste bin frequently.

2. Reversing the shredder often helps to clear a buildup of paper dust and particles,

ensure the bin is not full before reversing

FAQ & Troubleshooting

If you experience problems with your shredder please try some of the solutions below,

under no circumstance should you attempt to open the shredder unit, this will expose you

to a risk of electric shock and will invalidate your warranty.

Problem 1 The shredder fails to operate –

Is the shredder connected at the mains and is the power turned on?

Is the shredder switch set to ‘auto’?

Is the waste bin the right way around, make sure the viewing window on the waste bin

faces forwards?

Is the shredder located correctly on top of the waste bin? (The safety cut out is on the –

back of the shredder, the semi circular recess on the waste bin must slot inside the

semicircular shape on the back of the shredder head to deactivate the safety cut out.

Please ensure the semicircular recess on the bin is not outside the shredder head or that

the shredder head is not resting on top of the semicircular recess on the bin. When

correctly ﬁtted there should be no gap between the shredder head and the waste bin,

and the ﬁtting should be ﬂush all around the shredder - Press down ﬁrmly on the

shredder head to ensure it is in the correct position)

Has the shredder over heated? (Turn oﬀ at the mains and leave to cool down for 60 –

minutes then try again.)

Has the shredder blown a fuse? (Turn oﬀ at the mains and try replacing the fuse in the –

mains plug.)

3. It is not essential to oil an Aurora shredder

however regular lubrication will extend the

life of your shredder, prevent an increase in

noise and help to keep the shredder in

optimum working condition. We recommend

using the ‘Aurora SP1000 Shredder

Lubrication and Sharpening sheets’ at

least once a month to keep your shredder

blades lubricated and free from a buildup of

paper dust. The Aurora SP1000 sheets

also contain a special grinding powder

that will keep your shredder blades sharp.

These are available from your supplier in

packs of 12.

Produkt Specifikationer

Mærke:	Aurora
Kategori:	Papirmakulator
Model:	AS800CD

Har du brug for hjælp?

Hvis du har brug for hjælp til Aurora AS800CD stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Papirmakulator Aurora Manualer

Aurora ShredSafe AU1050XE Manual

21 August 2024

Aurora AS424C Manual

20 August 2024

Aurora AS1023CD Manual

20 August 2024

Aurora ShredSafe AU740XA Manual

20 August 2024

Aurora AU870MA Manual

20 August 2024

Aurora AS610C Manual

20 August 2024

Aurora AS1018CD Manual

20 August 2024

Aurora AS800CD Manual

20 August 2024

Papirmakulator Manualer

Nyeste Papirmakulator Manualer

Anova BIO150D Manual

3 April 2025

Honeywell 9316DS Manual

10 Februar 2025

Fellowes Powershred 325Ci Manual

12 Januar 2025

Fellowes Powershred LX25M Manual

12 Januar 2025

Olympia PS 53 CC Manual

11 Januar 2025

GBC AutoFeed+ 100M Manual

4 Januar 2025

GBC ShredMaster SM15-08 Manual

4 Januar 2025

GBC ShredMaster SX20-08 Manual

4 Januar 2025

GBC ShredMaster PX08-04 Manual

4 Januar 2025

GBC Momentum M20-32 Manual

4 Januar 2025