O c Mic e D505 Active Dynamic Vo al rophon
Owner’s Manual
Introduction and afety S I nstructions
Please read , and follow all instructions in this , understand manual
before using this product .
This product was made for professional users and we ask you to follow
a few restrictions to guarantee a hassle free workflow for you, and to -
keep the product in perfect working condition:
• Please do not operate this product in than the intended other
use cases.
• Do not use if the product is defective
• Always keep and operate the product in a placedry and safe
• Do not expose it to excessive heat (for example, do not leave it
in your car parked in the sun)
• If you need to bring the product inside thefrom cold, please
give it time to reach adequate temperature before use
(allowed storage temperature range: - 25 °C to 60 °C).
• The microphones performance may vary outside the specified
working temperature range from 0 . °C to 55 °C However short
use outside the specified limits will not damage the product if
you stay within the allowed storage temperature range
(- . 25 °C to 60 °C)
• Do not use this product in wet or in humid environmenta .
• Do not drop.
• When used upside down (for example in the OCH1) make sure
that a tight fit is achieved and do not operate it upside down
right above personnel
• This product requires a phantom power source of 48 V
(+/-4 V), max draw is 1 mA.
• Please keep this product away from small children and persons who are not able to operate
professional audio equipment (like light technicians and drunken roadies) .
• If you need to clean the product, do this only with a soft dry cloth
• Please do not use any third- party accessories unless otherwise stated
• Do not disassemble the product, as there are no user-serviceable parts inside (but plenty of
components to mess up).
• The length of the XLR cable must not exceed 30 m.
• Do not remove the stickers (if applicable).