Autotek A62CX Manual


Læs gratis den danske manual til Autotek A62CX (3 sider) i kategorien Højttaler. Denne vejledning er vurderet som hjælpsom af 43 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 22 anmeldelser. Har du et spørgsmål om Autotek A62CX, eller vil du spørge andre brugere om produktet?

Side 1/3
I N S T A L L A T I O N G U I D E
E I N B A U A N L E I T U N G
LOUDSPEAKERS
STREET MACHINE
INSTALLATION
The first step of installing a speaker system is thorough planning. Choose a suitable location
for your speaker components carefully. Follow these suggestions to ensure proper imaging
and maximum performance:
1. Choose a location that offers the least amount of obstruction between the components and
your ears.
2. Try to mount the speakers on the same plane. That is, they should be at the same height
and directly across from each other. Do not mount one speaker higher, lower, further forward
or further back from the opposite speaker.
3. Always check behind the chosen mounting locations to ensure that there is proper clearance
for the back of the speakers and avoid obstructions such as window tracks, wire harnesses,
gas tank etc.
4. Maximum performance is achieved when the speaker is securely mounted to a door panel
or rear speaker deck. There should be no gaps between the speaker basket and the mounting
surface.
SPEAKER CONNECTION:
• Connect the Plus-Terminal of the loudspeaker (marked with an cross) with the
Plus-Terminal of the amplifier’s speaker outputs (e.g. + L).
• Connect the Minus-Terminal of the loudspeaker with the Minus-Terminal of the
amplifier’s speaker outputs (e.g. – L).
• Repeat the procedure for all other regarding Speakers and Channels.
CAUTION
Please ensure the correct polarity (+ or -) for all connections.
Never connect loudspeakers directly with the vehicle’s chassis or power supply.
WIRING DIAGRAM AND INTERCONNECTION
PLUS
MINUS
MINUS
PLUS
ENGLISH
SPEAKER OUTPUTS
OF THE AMPLIFIER
+ L – + R –
SPEAKER L SPEAKER R


Produkt Specifikationer

Mærke: Autotek
Kategori: Højttaler
Model: A62CX
Antal pr. pakke: 2 stk
Produktfarve: Sort
Frekvensområde: 50 - 20000 Hz
Impedens: 4 ohm (Ω)
Højttaler, type: 2-vejs
Diameter: 165 mm
Form: Rund
Vurderet effekt: 100 W
Maksimal strøm: 200 W
Indbygningsdybde: 57 mm
Diameter for monteringshuller: 143 mm

Har du brug for hjælp?

Hvis du har brug for hjælp til Autotek A62CX stil et spørgsmål nedenfor, og andre brugere vil svare dig




Højttaler Autotek Manualer

Autotek

Autotek ATS4CX Manual

2 August 2024
Autotek

Autotek A62CX Manual

14 Oktober 2023
Autotek

Autotek ATX462 Manual

22 December 2022
Autotek

Autotek ATS5768CX Manual

10 November 2022
Autotek

Autotek ATS693 Manual

20 Oktober 2022
Autotek

Autotek ATX42 Manual

11 Oktober 2022

Højttaler Manualer

Nyeste Højttaler Manualer