Autotek ATX42 Manual

Autotek Højttaler ATX42

Læs gratis den danske manual til Autotek ATX42 (4 sider) i kategorien Højttaler. Denne vejledning er vurderet som hjælpsom af 41 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 21 anmeldelser. Har du et spørgsmål om Autotek ATX42, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

C A R A U D I O L O U D S P E A K E R S

I N S TA L L AT I O N G U I D E

I N S TA L L AT I O N S A N L E I T U N G

INSTALLATION

WIRING DIAGRAM AND INTERCONNECTION

The rst step of installing a speaker system is thorough planning. Choose a suitable location for your speaker com-

ponents carefully. Follow these suggestions to ensure proper imaging and maximum performance:

1. Choose a location that offers the least amount of obstruction between the components and your ears.

2. Try to mount the speakers on the same plane. That is, they should be at the same height and directly across

from each other. Do not mount one speaker higher, lower, further forward or further back from the opposite speaker.

3. Always check behind the chosen mounting locations to ensure that there is proper clearance for the back of the

speakers and avoid obstructions such as window tracks, wire harnesses, gas tank etc.

4. Maximum performance is achieved when the speaker is securely mounted to a door panel or rear speaker deck.

There should be no gaps between the speaker basket and the mounting surface.

SPEAKER CONNECTION:

• Connect the Plus-Terminal of the loudspeaker (marked with an cross) with the

Plus-Terminal of the amplier’s speaker outputs (e.g. + L).

• Connect the Minus-Terminal of the loudspeaker with the Minus-Terminal of the

amplier’s speaker outputs (e.g. – L).

• Repeat the procedure for all other regarding Speakers and Channels.

CAUTION

Please ensure the correct polarity (+ or -) for all connections.

Never connect loudspeakers directly with the vehicle’s chassis or power supply.

ENGLISH

PLUS

MINUS

PLUS

SPEAKER OUTPUTS

OF THE AMPLIFIER

+ L – + R –

SPEAKER L SPEAKER R

Produkt Specifikationer

Mærke:	Autotek
Kategori:	Højttaler
Model:	ATX42
Antal pr. pakke:	2 stk
Produktfarve:	Black,Blue
Frekvensområde:	75 - 22000 Hz
Impedens:	4 ohm (Ω)
Højttaler, type:	2-vejs
Diameter:	100 mm
Diskanthøjttaler:	Ja
Antal drivere til diskant:	2
Form:	Rund
Magnet-type:	Mylar
Diskant diameter:	13 mm
Subwoofer inkluderet:	Ingen
Vurderet effekt:	60 W
Maksimal strøm:	120 W
Drivercylinder, materiale:	Polypropylen
Indbygningsdybde:	43 mm
Diameter for monteringshuller:	94 mm
Forstærker inkluderet:	Ingen