
1
AVALLON.COM
®
©2025 Ferguson Enterprises, LLC V1.1-01222025
Thank you for purchasing your panel ready undercounter wine or beverage refrigerator from Avallon. Our brand set out with one parcular
goal: To present appliances that are as reliable and recognizable as they are aainable. We create products that invite enre kitchens to be
built around them, serving as an establishing feature in the very spaces they occupy.
In accordance with our ongoing mission to provide cung-edge and forward-thinking products to our loyal customers, we recently
introduced a line of panel ready appliances. These models are fully customizable, and in just a few short steps, you can match your
undercounter refrigerator with your adjacent cabinetry.
This document serves as a guide for installing custom door panels on any of these models. For more product informaon, including owner's
manuals, dimension guides, and more, visit Avallon.com.
PRODUCT INFORMATION
PANEL INSTALLATION INSTRUCTIONS
OVERLAY PANEL INSTALLATION INSTRUCTIONS
TOOLS REQUIRED
• Phillips Screwdriver • Drill and 7/64" Drill Bit • #6 Wood Screws* • Clamps (Recommended)
IMPORTANT
Warning: The weight of the overlay panel should not exceed 15 lbs.
NOTE
*Because the sizes of overlay panels vary, hardware for mounng your overlay is not included with your Avallon panel
ready refrigerator. #6 wood screws are recommended. The required length depends on the thickness of your overlay
panel. Take care to ensure the screws are not too long to avoid them protruding though the overlay panel.
1. Open the door to a 90° angle.
2. Use a Phillips screwdriver to remove the two (2) screws from the top hinge.
3. Remove the door by carefully sliding the top of the door forward while liing the door up and out of the boom hinge assembly.