2 www.AvantcoEquipment.com
Electrical: 110V, 60 Hz; 600W
Read and understand all instructions before using
this appliance. CAUTION! HOT SURFACE!
• This appliance is designed for commercial use only.
• This appliance must be placed on a level surface.
• Do not leave this appliance unattended while it is in use.
• Never immerse the appliance in water.
• Do not operate the kettle while it is empty.
• Do not overfill the appliance with water.
• Never move or carry the kettle when it is “ON” or if it is full of hot liquids.
• Do not attempt to repair or replace the power cord if it becomes damaged. Contact a qualified service agent.
• Be careful not to touch any hot surfaces. Make sure the power cord does not come in contact with any hot surfaces.
Carefully unpack the soup kettle warmer and inspect
• Place the warmer on a solid, level surface.
• Use with wet heat only. Add 24 oz. (.7 liters) of water to the kettle before placing the bain marie insert into the warmer.
Never over-fill with water. Under no circumstances should the bain marie float, even when empty. Remove any excess
• Turn the warmer on. The indicator light will glow, showing that the unit is on. Adjust the temperature control dial to the
a: Settings 8-12 are designed for initial warm-up
b: Normal control settings range from 1-8
c: Once the kettle has reached the desired temperature, adjust the temperature control dial to a lower setting. It is
recommended that the lowest possible setting that maintains food-safe serving temperatures be used.
Note: This soup kettle warmer is not designed to cook soups or sauces, nor is it designed to
rethermalize cold or frozen products.
• Always keep the hinged lid attached and closed when not serving.
