Avocent Cybex SC M185DP Manual

Avocent Skifte Cybex SC M185DP

Læs gratis den danske manual til Avocent Cybex SC M185DP (2 sider) i kategorien Skifte. Denne vejledning er vurderet som hjælpsom af 24 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 12.5 anmeldelser. Har du et spørgsmål om Avocent Cybex SC M185DP, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Cybex™ SCM100 SeRIeS

SeCuRe deSktop MatRIx

Quick Installation Guide

590-1990-501A 1

CybexTM SCM 185DP Secure Desktop Matrix Switch Shown

Before installing your Vertiv™

Cybex™ SCM100 Series Secure

Desktop Matrix switch, ensure the

following:

• The front panel is visible to the

user.

• The tamper evident labels are

all intact.

WARNING: The switch is equipped

with active intrusion protection.

Tampering may permanently

disable the switch and void the

warranty. If the enclosure appears

to have been tampered with or if all

the port LEDs flash sequentially,

please contact Technical Support.

The switch also has tamper evident

seals. Broken or removed seals will

void the warranty.

1. Connecting local

peripherals

Turnoallcomputersand

displays to be used with the

switch. Plug the monitor cables,

the keyboard and mouse cables

and speaker or headset cable

into the appropriate CONSOLE

ports on the back of the switch

2. Connecting a Dedicated

Peripheral Port (DPP)

device

NOTE: The device must be

compliant with USB 1.1 or USB

2.0 standards and included in

the administrator-defined list of

recognized devices.

Connect a USB device, such as

a smart card reader, to the blue

USB Type-A CONSOLE port on

the back of the switch.

NOTE: The DPP status LED

illuminates green when the

switch is on and connected to a

recognized USB device. If only

some computers use the DPP

functionality, connect the USB

device to computer 1 and

configure the channels and

computer mapping accordingly.

3. Connecting each

computer

Using a USB cable, connect

each computer to the USB

keyboard/mouse Type-B port

on the switch. Plug the monitor

cable from the corresponding

computer into the appropriate

port on the switch. If

applicable, connect an audio

cable from the computer’s

audio output to the switch’s

audio connection. If using DPP,

To contact Vertiv Technical Support: visit www.VertivCo.com

trademarks or registered trademarks of their respective owners. While every precaution has been taken to ensure accuracy and completeness herein, Vertiv Co. assumes no

responsibility, and disclaims all liability, for damages resulting from use of this information or for any errors or omissions. Specications are subject to change without notice.

Cybex™ SCM100 SeRIeS SeCuRe deSktop MatRIx

Quick Installation Guide

2 590-1990-501A

use a second USB cable to

connect each computer to the

second corresponding USB

Type-B port on the switch.

Repeat for all computers.

NOTE: The USB cables must

be connected directly to a free

USB port on your computer

with no USB hubs or other

devices in between.

4. Turning on the displays,

switch and computers

NOTE:

Installation of local

peripherals to the switch

console must occur prior to

powering up the switch.

Turn power on to the

connecteddisplaysrst,then

plug one end of the provided

power cord into the switch and

the other end into a wall outlet.

The display diagnostic LED

should be solid green a few

seconds after power is applied.

This indicates the display EDID

(ExtendedDisplayIdentication

Data) information is captured

and secured. Lastly, turn on the

computers. Ensure the

peripherals for each computer

are connected and working

properly. Repeat for all

computers.

Supported Hardware

The switches support most DVI-I,

HDMI, DisplayPort monitors and

video cards (adaptors may be

required), headsets and speakers.

The console keyboard/mouse and

DPP inputs are USB Type-A. The

computer keyboard, mouse and

DPP ports are USB Type-B.

NOTE: Do not connect a

microphone, including a headset

with an integrated microphone, to

the switch’s audio output port.

NOTE: Do not connect wireless

mice or keyboards to the switch.

For security reasons, this switch

does not support wireless

hardware.

Cables

It is recommended to use Vertiv

cable kits with your switch to

ensure optimal security and

performance.

Contact a Vertiv representative for

ordering details.

Produkt Specifikationer

Mærke:	Avocent
Kategori:	Skifte
Model:	Cybex SC M185DP

Har du brug for hjælp?

Hvis du har brug for hjælp til Avocent Cybex SC M185DP stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Skifte Avocent Manualer

Avocent Cybex SC 885DP Manual

28 August 2024

Avocent AV116 Manual

28 August 2024

Avocent Cybex SC 840DP Manual

28 August 2024

Avocent AV108 Manual

28 August 2024

Avocent Cybex SC 845DP Manual

28 August 2024

Avocent Vertiv AV116 Manual

28 August 2024

Avocent Cybex SC 920XP Manual

28 August 2024

Avocent Cybex SC 945DP Manual

28 August 2024

Avocent Matrix Manual

28 August 2024

Avocent Cybex SC 820DP Manual

28 August 2024

Skifte Manualer

Nyeste Skifte Manualer

Lancom GS-2412 Manual

4 April 2025

Lancom GS-2412P Manual

4 April 2025

Lancom GS-2426 Manual

4 April 2025

Hager ARF970D Manual

3 April 2025

Hager ARF920D Manual

3 April 2025

Roline 14.01.3579 Manual

2 April 2025

Fantini Cosmi B12BN Manual

1 April 2025

Fantini Cosmi B12DN Manual

1 April 2025

Fantini Cosmi B12GN Manual

1 April 2025

Fantini Cosmi B12HN Manual

1 April 2025