Axler Robin 05R V2 Manual

Axler Kamerastativ Robin 05R V2

Læs gratis den danske manual til Axler Robin 05R V2 (2 sider) i kategorien Kamerastativ. Denne vejledning er vurderet som hjælpsom af 31 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 16 anmeldelser. Har du et spørgsmål om Axler Robin 05R V2, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

www.AxlerSupports.com

ROBIN

PRO 05R V2

ONE-YEAR LIMITED WARRANTY

This Axler product is warranted to the original purchaser to be

free from defects in materials and workmanship under normal

consumer use for a period of one (1) year from the original

purchase date or thirty (30) days after replacement, whichever

occurs later. The warranty provider’s responsibility with

respect to this limited warranty shall be limited solely to repair

or replacement, at the provider’s discretion, of any product

that fails during normal use of this product in its intended

manner and in its intended environment. Inoperability of

the product or part(s) shall be determined by the warranty

provider. If the product has been discontinued, the warranty

provider reserves the right to replace it with a model of

equivalent quality and function.

This warranty does not cover damage or defect caused

by misuse, neglect, accident, alteration, abuse, improper

installation or maintenance. EXCEPT AS PROVIDED

HEREIN, THE WARRANTY PROVIDER MAKES NEITHER ANY

EXPRESS WARRANTIES NOR ANY IMPLIED WARRANTIES,

INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY

OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR

PURPOSE. This warranty provides you with speciﬁc legal

rights, and you may also have additional rights that vary from

state to state.

To obtain warranty coverage, contact the Axler Customer

Service Department to obtain a return merchandise

authorization (“RMA”) number, and return the defective

product to Axler along with the RMA number and proof

of purchase. Shipment of the defective product is at the

purchaser’s own risk and expense.

For more information or to arrange service, visit www.

axlersupports.com or call Customer Service at 212-594-2353.

Product warranty is provided by the Gradus Group.

www.gradusgroup.com

Axler is a registered trademark

of the Gradus Group.

• Please read and follow these instructions

and keep this manual in a safe place.

• Keep this product away from children.

• Use only parts provided by the

manufacturer.

• Make sure everything is secure before

proceeding.

• Make sure that this product is intact and

that there are no missing parts.

• To avoid damage to this product, be careful

not to overtighten or improperly thread any

of the threaded ﬁttings.

• Do not exceed the maximum load capacity.

• All images are for illustrative purposes only.

P R E C A U T I O N S

QUICK-START

GUIDE

GG2

B E F O R E Y O U S TA R T

This quick-start guide contains some basic

instructions for balancing the Robin Pro

05R V2 Stabilizer. Setting up a stabilizer like

the Robin Pro 05R V2 is not complicated,

but it takes some ﬁne-tuning. Don’t feel

discouraged if it takes a few tries to balance

the stabilizer—a little patience goes a long

way.

Before you start, set up your camera in the

exact way that you are going to use it when

shooting with the stabilizer. For example,

if you are going to use your camera’s LCD

panel, make sure to extend the panel before

mounting your camera onto the stabilizer.

Any change to the camera’s balance will

change its center of gravity, and make it

necessary to readjust the stabilizer.

S E T U P

1. Remove the quick-release plate from the

stabilizer by holding down the quick-release

locking button. Slide the plate off the

mount.(Fig.1)

2. Mount your camera to the stabilizer’s

quick-release plate by lining up the 1/4″-20

threaded bolt and screwing it in clockwise.

Some devices, like a cell phone, may need an

additional mounting accessory for secure

attachment.

3. With your device on the plate, hold down

the quick-release locking button on the

stabilizer mount and slide the plate back in.

(Fig. 2)

4. Center your device as best as possible on

top of the stabilizer by using the forward/

backward and left/right adjustment knobs.

(Fig. 3-4)

B A L A N C I N G T H E S T A B I L I Z E R

1. Now it’s time to balance your stabilizer.

Grab the stabilizer’s handle and see how it

balances. It will likely not be perfectly level

at ﬁrst. (Fig. 3-4)

2. Adjust the height of the gimbal on the

center column by loosening the gimbal

locking collar and slide to the desired

height. (Fig. 5)

3. Secure the gimbal by tightening the

locking collar. Repeat these steps until the

stabilizer remains vertically balanced while

you hold it by the handle.

Fig. 1

Fig. 2

Fig. 4

Fig. 5

1. Sled

2. Quick-release plate

3. 1/4″-20 mounting

threads

4. Quick-release locking

knob

5. Locking-pin release

button

6. Forward/backward

adjustment knob

7. Left/right adjustment

knob

8. Handle

9. Center column

10. Gimbal

11. Gimbal locking collar

12. Counterweight

O V E R V I E W

Fig. 3

Produkt Specifikationer

Mærke:	Axler
Kategori:	Kamerastativ
Model:	Robin 05R V2

Har du brug for hjælp?

Hvis du har brug for hjælp til Axler Robin 05R V2 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Kamerastativ Axler Manualer

Axler PSR-44 Manual

6 Juli 2025

Axler MAR-11 Manual

20 December 2024

Axler CS-CF-30 Manual

19 December 2024

Axler CS-CPS-20A Manual

19 December 2024

Axler Robin 05R V2 Manual

19 December 2024

Axler Robin 20S Manual

19 December 2024

Axler FCS-1428 Manual

19 December 2024

Axler CS-CF-30LW Manual

19 December 2024

Axler VM-2370CF/VH-12 Manual

19 December 2024

Kamerastativ Manualer

Nyeste Kamerastativ Manualer

Manfrotto MTONEA Manual

29 Juli 2025

Kern IFB-A01 Manual

29 Juli 2025

Oben Skysill ALF-6113L Manual

26 Juli 2025

25 Juli 2025

25 Juli 2025

24 Juli 2025

24 Juli 2025

SmallRig CT200 Manual

24 Juli 2025

Braun NOX 160 Professional Manual

24 Juli 2025

SmallRig FreeSpeed Manual

24 Juli 2025