Axton A601 Manual

Axton Modtager A601

Læs gratis den danske manual til Axton A601 (18 sider) i kategorien Modtager. Denne vejledning er vurderet som hjælpsom af 3 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 2 anmeldelser. Har du et spørgsmål om Axton A601, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/18

INSTALLATION & OPERATION MANUAL

EINBAU & BEDIENUNGSANLEITUNG

1-/2-/4-/6-CHANNEL POWER AMPLIFIERS

A101 I A201 I A401 I A601

– 2 – – 3 –

Thank you for purchasing this AXTON amplier!

To maximize the performance of this amplier and your complete car audio system installation,

we recommend you acquaint yourself thoroughly with all technical features and controlling

options of this AXTON amplier. Please read this manual carefully, before attempting the

installation.

If, after reading this manual, you still have questions regarding functions or the installation of

the amplier, we recommend that you consult your dealer.

SAFETY INSTRUCTIONS

n Do not turn on any function which may distract you while driving your vehicle.

Functions requiring sustained attention must only be used when the vehicle is at a

complete standstill. Make sure to always stop your vehicle in a safe place before

operating these functions. There are risks of causing an accident.

n Keep the volume at a low level to be able to hear exterior noises while driving

the vehicle. There are risks of causing an accident.

n Do not open the amplier or undertake any modication of the product. There

is a risk of accident, re or electric shock.

n Only use this amplier with 12V mobile applications. Any use other than for this

product intended are may lead to re, electric shock or injury.

n Use correct amperage fuses. There are risks of re or electrocution.

n Do not obstruct radiators and/or vents. Internal overheating may occur and cause

a re.

n Ensure all connections are properly made. Check the section of cable and the

type of cable if it does not correspond with the use. There is a risk of re, injury and/

or damage to the product.

n Do not use screw nuts or fasteners part of the steering or braking systems for

ground connection. The fasteners and nuts used for the brake and steering systems

(or any other security system) as well as various tanks must never be used for

grounding. Use of these parts as ground may deactivate the vehicle’s control system

and cause a re or other technical problem.

n Keep all small objects which could be swallowed, such as the fasteners and

screws, out of the reach of children. Swallowing such objects may cause serious

injuries. In the event of swallowing any of these objects, immediately seek medical

advice.

n Before starting the installation, disconnect the negative terminal of the battery

to avoid any risk of injury, re or damage to the equipment.

TECHNICAL SPECIFICATIONS

MONO AMPLIFIER A101

230 W x 1 @ 4 Ohm (< 1 % THD / 14.4 V)

380 W x 1 @ 2 Ohm (< 1 % THD / 14.4 V)

600 W x 1 @ 1 Ohm (< 1 % THD / 14.4 V)

Frequency response: 15 Hz – 250 Hz

Variable input sensitivity: 0.4 – 10 V

Signal to noise ratio: > 86 dB

Low pass lter: 50 – 250 Hz

Subsonic lter: 10 – 55 Hz

Dimensions LxWxH: 185 x 40 x 105 mm

2-CHANNEL AMPLIFIER A201

150 W x 2 @ 4 Ohms (< 1 % THD / 14.4 V)

260 W x 2 @ 2 Ohms (< 1 % THD / 14.4 V)

500 W x 1 @ 4 Ohms (< 1 % THD / 14.4 V)

Frequency response: 15 Hz – 35 kHz

Variable input sensitivity: 0.4 – 10 V

Signal to noise ratio: > 88 dB

High pass lter: 40 – 400 Hz

Low pass lter: 40 – 400 Hz

Dimensions LxWxH: 205 x 40 x 105 mm

4-CHANNEL AMPLIFIER A401

100 W x 4 @ 4 Ohm (< 1 % THD / 14.4 V)

170 W x 4 @ 2 Ohm (< 1 % THD / 14.4 V)

350 W x 2 @ 4 Ohm (< 1 % THD / 14.4 V)

Frequency response: 10 Hz – 35 kHz

Variable input sensitivity: 0.4 – 10 V

Signal to noise ratio: > 85 dB

High pass lter: 40 – 400 Hz

Low pass lter: 40 – 400 Hz

Dimensions LxWxH: 230 x 40 x 105 mm

6-CHANNEL AMPLIFIER A601

100 W x 6 @ 4 ohms (< 1 % THD / 14.4 V)

160 W x 6 @ 2 ohms (< 1 % THD / 14.4 V)

320 W x 3 @ 4 ohms (< 1 % THD / 14.4 V)

Frequency response: 10 Hz – 35 kHz

Variable input sensitivity: 0.4 – 10 V

Signal to noise ratio: > 85 dB

High pass lter: 40 – 400 Hz

Low pass lter: 40 – 400 Hz

Dimensions LxWxH: 282 x 40 x 105 mm

Produkt Specifikationer

Mærke:	Axton
Kategori:	Modtager
Model:	A601

Har du brug for hjælp?

Hvis du har brug for hjælp til Axton A601 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Modtager Axton Manualer

22 August 2025

2 Oktober 2024

23 August 2024

23 August 2024

21 August 2024

20 August 2024

20 August 2024

20 August 2024

19 August 2024

19 August 2024

Modtager Manualer

Nyeste Modtager Manualer

AMX NMX-ENC-N2612S Manual

14 September 2025

AMX UDM-RX02N Manual

14 September 2025

AMX AVB-RX-DXLINK-HDMI Manual

14 September 2025

Perreaux Silhouette SXH2 Manual

13 September 2025

Perreaux Silhouette SXP2 Manual

13 September 2025

Perreaux Silhouette SX25i Manual

12 September 2025

Perreaux Silhouette SXV2 Manual

12 September 2025

Sony STR-DE635 Manual

12 September 2025

Perreaux Silhouette SX25 Manual

12 September 2025

Perreaux Audiant 80i Manual

12 September 2025