Azden SGM-1X Manual

Azden Mikrofon SGM-1X

Læs gratis den danske manual til Azden SGM-1X (2 sider) i kategorien Mikrofon. Denne vejledning er vurderet som hjælpsom af 8 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 4.5 anmeldelser. Har du et spørgsmål om Azden SGM-1X, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

SGM-1X

INSTRUCTIONS

PROFESSIONAL SHOTGUN MICROPHONE

Super-Cardioid Polar Pattern

Azden Corporation

147 New Hyde Park Road

P.O. Box 10

Franklin Square, NY 11010

vox 516.328.7500 • fax 516.328.7506

AzdenUS@azdencorp.com • www.azdencorp.com

Thank you for purchasing the Azden SGM-1X microphone. Designed for Video and Audio

Professionals, the SGM-1X is a directional super-cardioid shotgun microphone with a wide

frequency response and low noise levels.

BATTERY:

The SGM-1X is powered by 1 “AAA” battery (not included). Unscrew the lower half of the short

barrel case just below the “Power” switch by turning it counterclockwise. Install 1 fresh “AAA”

Alkaline battery, making sure to check polarity, and close the case by turning it clockwise. DO

NOT OVERTIGHTEN or you may strip the threads.

SHOCK-MOUNT HOLDER:

The SGM-1X is supplied with a shock-mount holder. This holder can be used on a camera

shoe or on a microphone stand. Push the barrel through the center of the elastic bands until it

is positioned as shown. To secure the holder to a camera shoe, slide the holder into the

camera shoe and tighten the thumbwheel by turning it clockwise. To secure the holder to a

microphone stand, screw the holder to the stand by turning it clockwise until it is tight.

NOTE: Two holes are drilled into the bottom of the holder for different diameter microphone

stand threads, choose the one that matches your mic stand.

POWER SWITCH:

The SGM-1X has a 2-position power switch.

OFF: Switch the microphone to OFF when not in use to conserve battery life.

ON: Switch the microphone to ON for normal operation.

LOW-CUT SWITCH:

The Sgm-1X has a "Low-Cut" filter switch that is designed to reduce unwanted low frequen-

cies from entering the audio. This will reduce low frequency energy created from things like

air conditioner compressors. The frequency response is "Flat" when the switch is in the

position while the low frequencies are reduced when the switch in in the position.

MIC OUTPUT:

The SGM-1X has a balanced XLR output and will work in any low impedance microphone

input of 1K ohm or less. This includes balanced XLR or unbalanced ¼" and 3.5mm micro-

phone inputs. Due to the wide variety of possible connections and equipment used with the

SGM-1X, an output cable is not supplied.

WIRELESS OPTIONS:

You can turn the SGM-1X into a wireless microphone by purchasing one of Azden’s unique

XLR plug-in transmitters and matching receiver. For more details contact your Azden dealer or

one of the dealers linked at our website: www.azdencorp.com

SPECIFICATIONS:

FREQUENCY RESPONSE 80-18,000Hz

SENSITIVITY SUPER CARDIOID -33dB re 1V/Pa

IMPEDANCE 1.5k Ohms @ 1KHz

MAX. SPL INPUT LEVEL 110dB

SIGNAL TO NOISE RATIO 65dB

DYNAMIC RANGE 80dB

BATTERY TYPE AAA (1.5V) - USE ALKALINE BATTERY

BATTERY CURRENT 0.2 mA

BATTERY LIFE 1000 HOURS w/ALKALINE BATTERY

WEIGHT w/o BATTERY 4.76oz (135grams)

DIMENSIONS 11.8" (300mm) length

0.83" (21mm) diameter

OUTPUT TYPE 3-Pin XLR type

SUPPLIED ACCESSORIES SHOCK MOUNT MIC HOLDER

1 WINDSCREEN

Windscreen

Shock Mount Holder

Produkt Specifikationer

Mærke:	Azden
Kategori:	Mikrofon
Model:	SGM-1X
Vægt:	135 g
Batteriteknologi:	Alkaline
Dimensioner (BxDxH):	21 x 21 x 300 mm
Forbindelsesteknologi:	Ledningsført
Batterilevetid (maks.):	1000 t
Batteritype:	AAA
Driftsspænding:	1.5 V
Mikrofonindgangsimpedans:	1500 ohm (Ω)
Mikrofon frekvens:	80 - 18000 Hz
Mikrofon sensitivitet:	-41 dB