Baby Lock Regent Manual

Baby Lock Ikke kategoriseret Regent

Læs gratis den danske manual til Baby Lock Regent (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 61 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 31 anmeldelser. Har du et spørgsmål om Baby Lock Regent, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

NEEDLE AND THREAD INFORMATION

Use only the correct needle system as recommended by Baby Lock. For

the Regent, this is . This needle system is designed needle system 134

to withstand high stitching speeds. Choose among sizes 12/80 through

20/125 according to the type of thread you are using.

TO THREAD THE REGENT

1. Place thread cone onto spool post (1), thread through

thread-mast eyelet (2) from back to front and pass

through thread guide (3).

2. Continue to three-hole thread guide (4). Wrap all

three holes from back to front, being careful not to

cross threads. If delicate threads are breaking,

skip one or two holes to lessen tension.

3. Pass through thread guide (5) and continue

down to tension assembly (6). Ensure

that the thread is flossed between

the two tension discs.

4. Catch the take-up spring (7) with thread and

pull it down under the stirrup thread guide (8).

5. Bring the thread up and through the hole of

the take-up lever (9) from back to front, and

then through the lower thread guide (10).

Finally, thread through the needle bar

thread guide hole (11).

6. Follow the groove down the front of the needle

and insert thread through the eye of the needle (12) from

front to back. While pulling thread through the eye, be

careful that the thread does not twist around the needle.

NEEDLE SIZE THREAD SIZE

12 and 14 monofilament, 100 wt. silk, 60 wt. poly, mylar

16 monofilament, hologram, 100 wt. silk, 60 wt. poly, 50 wt. poly, 50 wt. cotton, some 40 wt. threads.

18 40 wt. cottons and poly, 30 wt. cottons and poly

20 Any thread 30 wt. and heavier such as 12 wt., 19 wt., 30 wt.

Quick Reference Card

REGENT SCREEN BUTTONS

OTHER BUTTONS ON THE MAIN SCREEN

Basting Mode: Basting stitches can be

created in Regulated and in Manual mode.

Needle-Stop: Touch to toggle between

having the needle stop in the up or down

position when you stop stitching. It does

not affect the needle at the time you

touch the button. Your choice displays in

gold.

Quick-Set Tension®: The number on the

button indicates the current tension, which

is set by manually turning the tension knob.

Bobbin Estimator: The number on this

button shows an estimate of how much

thread remains on the bobbin. This number

updates as you quilt. As the number gets

closer to zero, the bobbin is running out of

thread.

Play: Press the Play button in order to

begin quilting.

Pause: Press the Pause button in order to

stop quilting.

Manual Stitching Mode: Touch the Manual

button and then specify the stitches per

minute (SPM) by pressing the (+) or (-) button

or selecting one of the two SPM presets. The

faster you move the fabric, the longer the

stitches become.

Regulated Stitching Mode: Touch the

Regulated button and then select either

Cruise or Precision stitch regulation. A

consistent stitch length (stitches per inch)

will be maintained regardless of how fast the

fabric is moved, unless moved too fast for the

machine to keep up.

Cruise Stitch Regulation: Touch the Cruise

button and specify the stitches per inch

(SPI) and stitches per minute (SPM) cruise

settings. Machine starts to stitch immediately,

at the chosen SPM cruise speed, when the

Pause/Play button is pressed or foot pedal is

engaged. When you begin to move the fabric,

a consistent stitch length will be maintained

(SPI).

Precision Stitch Regulation: In this mode,

the machine stitches only when the fabric is

moved. Touch the Precision button and specify

the stitches per inch (SPI). Press the Pause/

Play button or engage the foot pedal and move

the fabric to start quilting. When you stop

moving the fabric, the needle will pause in mid-

stroke. Move the fabric to resume stitching.

MACHINE TOOLS BUTTONS

These buttons are available after selecting the Machine Tools button.

AlarmsCalculator Software

updater

Timer and

Counter

Diagnostics

STITCHING MODES

TOOLBAR BUTTONS

Touch this icon to open

the

Main Screen

Touch this icon to

open the

Tools

Touch this icon to see

System Information

The toolbar buttons are available on every Regent screen. For more information about tools and settings, see the

Machine Tools

and

Information Screen

sections of the Regent manual.

LightsLow Bobbin

Estimator

Language

Produkt Specifikationer

Mærke:	Baby Lock
Kategori:	Ikke kategoriseret
Model:	Regent

Har du brug for hjælp?

Hvis du har brug for hjælp til Baby Lock Regent stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Baby Lock Manualer

Baby Lock Eclipse DX Manual

5 August 2025

Baby Lock Tiara III BLTR16-3 Manual

5 August 2025

Baby Lock Gallant XL Stationary Manual

10 December 2024

Baby Lock Regalia Longarm Manual

10 December 2024

Baby Lock Gallant Longarm Manual

10 December 2024

Baby Lock Applaud Manual

14 September 2024

Baby Lock 55th Anniversary Limited Edition Manual

2 September 2024

Baby Lock Esante Manual

29 August 2024

Baby Lock Ellageo Plus Manual

29 August 2024

Baby Lock Evolution Manual

29 August 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Philips TD5101X Manual

15 August 2025

Philips AWP1721 Manual

15 August 2025

Candy CWVB6B Manual

15 August 2025

Philips ED8DVDRW Manual

15 August 2025

Sauermann Si-60 Manual

15 August 2025

Philips ES8DVDRX Manual

15 August 2025

Philips TD5101I Manual

15 August 2025

Philips GoSure TE60x Manual

15 August 2025

Adj FS600LED Manual

15 August 2025

Philips GoSure TE50i Manual

15 August 2025