WAC Lighting L-LED810 Manual

WAC Lighting Ikke kategoriseret L-LED810

Læs gratis den danske manual til WAC Lighting L-LED810 (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 3 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 2 anmeldelser. Har du et spørgsmål om WAC Lighting L-LED810, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

WAC Lighting

www.waclighting.com

Phone (800) 526.2588 • Fax (800) 526.2585

Headquarters/Eastern Distribution Center

44 Harbor Park Drive • Port Washington, NY 11050

Phone (516) 515.5000 • Fax (516) 515.5050

Western Distribution Center

1750 Archibald Ave • Ontario, CA 91761

Phone (800) 526.2588 • Fax (800) 526.2585

WAC Lighting retains the right to modify the design of our products at any time as part of the company's continuous improvement program. JULY, 2014

INSTALLATION INSTRUCTION

Impulse LEDme® Track Luminaires

H-LED810, L-LED810, J-LED810

CAUTION

• For Use with WAC “J”, “J2”,”L”, & ”H” track systems. Fixture may also be used on other manufacturers’ brands of track. (Consult

factory for compatibility)

• Read all instructions before installing.

INSTALLATION ON TRACK:

Fixture Installation for J-LED810

1. Fixtures are designed for use on “J” series WAC Lighting track only. They may also be used on other manufacturers’

brands of track. (Consult factory for compatibility)

Note: The track has a groove running its length to indicate polarity, and the locking tab has a slant for easy installation.

2. Insert adapter into track slot and rotate it 90°, The “P” contact and low side of the locking tab should point

to the grooved side of the tack.

3. Make sure the locking tab seat properly in the track slot.

4. Reverse procedure to remove. Track heads may be positioned anywhere along the track.

FIXTURE INSTALLATION FOR LLED810

1. Fixtures are designed for use on “L” series WAC Lighting track only. They may also be used on other manufacturers’ brands of

track. (Consult factory for compatibility)

Note: The track has a ridge running its length to indicate polarity, and the locking tab has a slant for easy installation.

2. Insert adapter into track slot and rotate it 90, so that the low side of the locking tab faces the ridged side of the track.

3. Make sure the locking tabs seat properly in the track slot.

4. Reverse procedure to remove. Track heads may be positioned anywhere along the track.

Produkt Specifikationer

Mærke:	WAC Lighting
Kategori:	Ikke kategoriseret
Model:	L-LED810

Har du brug for hjælp?

Hvis du har brug for hjælp til WAC Lighting L-LED810 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret WAC Lighting Manualer

WAC Lighting LED207 Manual

29 December 2026

WAC Lighting L-LED810 Manual

29 December 2026

WAC Lighting L-1052 Manual

29 December 2026

WAC Lighting LTK-720 Manual

29 December 2026

WAC Lighting H-2020 Manual

29 December 2026

WAC Lighting BA-ACLED36 Manual

29 December 2026

WAC Lighting LTK-765 Manual

29 December 2026

WAC Lighting LTK-704 Manual

29 December 2026

WAC Lighting H-LED820S Manual

29 December 2026

WAC Lighting R4RNL-36EM Manual

21 December 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

ET2 Starburst E20114 Manual

29 December 2026

Silverstone ARM14 Manual

29 December 2026

LevelOne FVT-2201 Manual

29 December 2026

Vonroc CD839AA Manual

29 December 2026

ProSelect PSTSP21AWH Manual

29 December 2026

TOTO TS300A51 Manual

29 December 2026

Electro Harmonix 720 Manual

29 December 2026

Nokia Comfort Earbuds TWS-411 Manual

29 December 2026

Duravit L-Cube LC624007272 Manual

29 December 2026

Vaxcel T0259 Manual

29 December 2026