Baby unit
1. ON/OFF and pairing
button
2. «MAIN MENU»
3-4. Microphone sensitivity
down adjustment
button
5-6. Night Light
7. Microphone
8. Transmit icon
9. Temperature on-screen
display
Parent unit
18. ON/OFF and pairing button
19. «MAIN MENU»
20. 21. Volume control
22. Microphone
23. Speaker
24. Visual level meter/Out-of-
range icon
25. Temperature on-screen
display
26. Power On/Battery Low/
Charging icon
BABY MONITOR PREMIUM CARE • Instruction manual
SETTING UP THE APPLIANCE
Place the transmitter out of the child’s reach, on a flat surface between 1m and
2.50m from baby’s head. Point the transmitter microphone towards the baby.
1 m
10. Power On / Low
battery indicator
11. Microphone always
ON icon
12. Sound volume
13. Night Light icon
14. Baby unit’s number
15. «Menu exit» icon
16. Micro-USB port and
power socket
17. Speaker
27.Transmit icon
28. Vibration icon
29. Speaker mute icon
30. Baby unit’s number
31. « Play all lullabies» icon
32. Lullabies icon
33. Battery low icon
34. «Menu exit» icon
35. Reply to baby
36. Micro-USB port and power
socket
POWER SUPPLY
A. BABY UNIT
• Operation from
batteries (3 x AAA 1.5 V
not included)
When a «BUPP» sounds on your receiver it means that your transmitter has lost 1/3 of its battery.
N.B. The range is longer when the transmitter is running on a power outlet.
Before the first use, charge the Lithium-Polymer battery for at least 3 hours. It is recommended to turn off
the device during the first charge.
• USB Cables
power supply
• Charging up with USB
cables
B. PARENT UNIT
• Operation from lithium
battery pack
38
Plugs not included
8. Congratulations! Your camera is now connected!Turn off both units and then turn back on.
PAIRING
This process links the receiver to the transmitter so that they communicate on a different frequency to other nearby appliances
(even baby monitors of an identical model).
1. OFF 2. 3. ON 4.
PARENT UNIT
OFF Button Keep pressing the
volume up button
Switch down the button
to ON
The «P» icon is flashing
BABY UNIT
Repeat the same operations on the RECEIVER.
The «P» icon is flashing Choose the number of the transmitter and confirm with the
«Menu» button
Confirm pairing by
pressing the «Menu»
button a second time»