Balance Meteo RF-WS101 - 975194 Manual

Balance Meteo Vejrstation RF-WS101 - 975194

Læs gratis den danske manual til Balance Meteo RF-WS101 - 975194 (49 sider) i kategorien Vejrstation. Denne vejledning er vurderet som hjælpsom af 24 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 12.5 anmeldelser. Har du et spørgsmål om Balance Meteo RF-WS101 - 975194, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/49
Itemno. 975194
Color Professional Weather station Owner’s Manual
Thank you for purchasing the new generation of professional weather station. Designed and engineered
with the state-of-art technology and components, this instrument will provide accurate and reliable
measurement of wind speed & direction, wind chill, daily/weekly/monthly/accumulated rainfall,
barometric pressure, weather forecast, indoor/outdoor humidity, temperature, heat index & dew point as
well as radio-controlled alarm clock. Read this manual carefully to fully explore the features and
functions of the new product.
In this package you will find:
One monitor (Receiver)
One anemometer (Transmitter – transmit wind & outdoor Channel-1 temperature/humidity data)
One rain gauge (Transmitter – transmit rainfall data)
Mounting hardware for rain gauge (2 sets of screws & plastic screw plugs)
Mounting hardware for anemometer (2 pieces of U-shape metal plate, 4 sets of Hex screws & nuts)
One owner’s’ manual
One 6.0V adapter
Additional tools needed for installation
- Small Phillips screwdriver
- Hexagonal Key
- Electric drill
- Pencil
- Level
- Mast, 1 – 1.25 inch (2.54 – 3.18 cm) in diameter (to mount the anemometer)
Installation
The weather station operates at 433MHz and does not require wire installation among the component
parts. To ensure successful installation and the best performance, we recommend you follow the
installation instructions in the order they appear in this manual.
1. Battery & adapter installation for the monitor (receiver)
Main Power source: Plug in the adapter jack into the back side of the unit for basic operation and
continuous backlight.
1
Backup Power: Open the battery door and insert 3 pieces of AAA batteries according to the polarity
indicated, close the battery cover.
Sea level pressure setting
After battery/adapter installation, the monitor will enter sea level pressure setting mode directly and the
pressure reading will flash. Press “▲” or “▼” to set the sea level pressure value. Press “PRESSURE” to
confirm the setting and exit. This allows the unit to provide a more accurate weather forecast &
pressure reading.
You can also set the sea level pressure any time after the installation is completed. For more
information, see “WEATHER FORECAST & BAROMETRIC PRESSURE” section.
Note: you may obtain the current sea level pressure from the weather web site for your locate area.
2. Selecting a location for the anemometer
Select a mounting location for the anemometer that is:
- Outdoors, not blocked on top or sides, so wind can freely reach the anemometer
- Within 50 meter (164 feet) open area from the monitor. Reduce distance if obstacles is between
the anemometer & the monitor
The best location for the anemometer is usually mounted on a mast in an open area where wind is not
blocked on top or sides, or above roof level on the building where the monitor is located.
Testing the effective transmission range
Before mounting the anemometer, measure the distance between the monitor & anemometer and be
sure it is within the effective transmission range. It is recommended to perform a simple RF
transmission test before mounting.
1) Place the monitor in your selected indoor location and install adapter & batteries (see “Battery &
adapter installation for the monitor” section above)
2) Place the anemometer horizontally in your selected outdoor location. Loosen the screws on the
battery door with a small Phillips screwdriver and open the battery door. Insert 2 pieces of AA
batteries according to the polarity indicated. Close the battery door and tighten the screws.
3) Hold “CHANNEL/SEARCH” button on the monitor for 3 seconds and the wind direction,
temperature & humidity icons will flash on the display. The monitor is now searching for all remote
sensors.
4) If valid wind direction, wind speed and channel-1 temperature/humidity readings are shown on the
monitor within 10 minutes, the RF transmission is successful and the anemometer & monitor are
within the effective transmission.
If above readings are not shown after 10 minutes of searching, the transmission is failed.
Shorten the distance between the anemometer & monitor. Reset the anemometer by removing all
2

Produkt Specifikationer

Mærke: Balance Meteo
Kategori: Vejrstation
Model: RF-WS101 - 975194

Har du brug for hjælp?

Hvis du har brug for hjælp til Balance Meteo RF-WS101 - 975194 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Vejrstation Balance Meteo Manualer

Balance Meteo

Balance Meteo RF-WS31 - 695159 Manual

8 August 2024
Balance Meteo

Balance Meteo RF-WS21 - 865373 Manual

5 August 2024
Balance Meteo

Balance Meteo RF-WS101 - 975194 Manual

4 August 2024

Vejrstation Manualer

Nyeste Vejrstation Manualer

Essentiel B

Essentiel B TH01 Manual

18 Juni 2025
Levenhuk

Levenhuk Wezzer SN10 Manual

17 Juni 2025
Levenhuk

Levenhuk Wezzer PH20 Manual

16 Juni 2025
Levenhuk

Levenhuk Wezzer Teo TH10 Manual

16 Juni 2025
Levenhuk

Levenhuk Wezzer Teo TH30 Manual

16 Juni 2025
Levenhuk

Levenhuk Wezzer Teo TH50 Manual

16 Juni 2025
Levenhuk

Levenhuk Wezzer Air PRO DM20 Manual

16 Juni 2025
Levenhuk

Levenhuk Wezzer Teo TH40 Manual

15 Juni 2025
Levenhuk

Levenhuk Wezzer PRO LP240 Manual

15 Juni 2025
Levenhuk

Levenhuk Wezzer BASE L50 Manual

15 Juni 2025