Barska AE10824 Manual

Barska Teleskop AE10824

Læs gratis den danske manual til Barska AE10824 (1 sider) i kategorien Teleskop. Denne vejledning er vurderet som hjælpsom af 13 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 7 anmeldelser. Har du et spørgsmål om Barska AE10824, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/1

ANCHOR MASTER

36 Power, 90080

Telescope

HOW TO ASSEMBLE YOUR SCOPE:

Before, you begin to assemble your scope, you will

need

to have a Phillips-head screwdriver and a

Crescent wrench. *NOTE* Please be careful not to

scratch your scope.

1. Place the optical tube and arc mount on its side.

2. Attach the legs of the tripod at the base of the mount.

3. Carefully slide one of the leg attachments shaft through

the top of the attached leg through the holes of the

mount. Make sure that the support tray brackets

are facing up.

4. Gently stand the scope and tripod, slowly spread the

legs of the tripod.

5. With the shining side of the support tray facing up,

screw in its brackets.

Make sure to tighten all screws and nuts. Your scope is

now assembled and ready to be used.

OW TO MOUNT THE FINDER SCOPE

ttach

the 2 mounting rings to the optical tube with 4

mounting screws.

2. Center the ﬁ nder scope within the mounting rings

using 6 mounting screws

HOW TO USE YOU SCOPE:

Start by loosening the lock and levers and gently guide

the

scope to your desired position.

1. Once it’s at the position that you want, tighten the locks

and levers.

2. Point the objective lens to an object and look through

the eyepiece.

3. With slow and tiny motions, rotate the focus knob

slowly, until your view of the object is sharp and

in focus.

HOW TO TAKE CARE OF YOUR SCOPE:

1. When wiping the lenses, use a soft lens cloth.

2. To remove any remaining dirt or smudges, add

one or two drops of isopropyl alcohol to the cloth,

then wipe gently.

3. Store your scope in a moisture-free area.

Parts included in package:

Optical tube with mount attached 1 unit

Mahogany wood tripod legs 3 units

Acorn nuts 3 pcs

Support tray 1 unit

Washers and bolts 3 sets

Mounting Screws

10 pcs

Mounting Rings

2 pcs

PARTS

1. Optical tube with arc mount attached

2. Mahogany wood tripod

3. Support tray

4. Lock and levers

5. Objective Lens

6. Eyepiece

7. Focus Knob

Finder Scope

9. Image diagonal

**IMPORTANT**

NEVER ATTEMPT TO CLEAN YOUR SCOPE INTERNALLY OR

TRY TO TAKE IT APART. DO NOT LOOK DIRECTLY AT THE

SUN WITH THE SCOPE AS IT WILL CAUSE DAMAGE TO

YOUR EYE.

Produkt Specifikationer

Mærke:	Barska
Kategori:	Teleskop
Model:	AE10824

Har du brug for hjælp?

Hvis du har brug for hjælp til Barska AE10824 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Teleskop Barska Manualer

Barska AE11124 Manual

25 August 2024

Barska AE10824 Manual

25 August 2024

Barska AE10822 Manual

25 August 2024

Barska AE10748 Manual

25 August 2024

Barska AE10758 Manual

25 August 2024

Barska AE10100 Manual

25 August 2024

Teleskop Manualer

Nyeste Teleskop Manualer

Vaonis Hestia Manual

21 November 2025

National Geographic 80-30103 Manual

12 November 2025

Levenhuk Skyline Travel 50 Manual

7 November 2025

Levenhuk Skyline Travel 70 Manual

7 November 2025

Levenhuk Skyline PLUS 105 MAK Manual

7 November 2025

Levenhuk Skyline Travel 80 Manual

6 November 2025

Levenhuk Skyline 76x700 AZ Manual

6 November 2025

Levenhuk Skyline PLUS 80S Manual

6 November 2025

Carson Stara SR-100 Manual

6 November 2025

Levenhuk Skyline PLUS 120S Manual

5 November 2025