Baumatic GELATO1SS Manual

Baumatic Ismaskine GELATO1SS

Læs gratis den danske manual til Baumatic GELATO1SS (16 sider) i kategorien Ismaskine. Denne vejledning er vurderet som hjælpsom af 10 personer og har en gennemsnitlig bedømmelse på 3.9 stjerner ud af 5.5 anmeldelser. Har du et spørgsmål om Baumatic GELATO1SS, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/16

GELATO1SS 1.5 Litre

freestanding automatic ice

cream and sorbet maker

USER MANUAL FOR YOUR BAUMATIC

GELATO1SS

1.5 Litre freestanding

automatic ice cream and

sorbet maker

NOTE: This User Instruction Manual contains important

information, including safety & installation points, which will

enable you to get the most out of your appliance. Please keep it

in a safe place so that it is easily available for future reference, for

you or any person not familiar with the operation of the appliance.

DD 30/04/10

Contents

Environmental note 4

Important safety information 5 – 6

Specifications of your GELATO1SS 7

Description of the appliance 7

Using your Baumatic ice cream maker 8-11

Before switching on 8

Prior to making ice cream 8 – 9

Making ice cream 9

Removal and storage of ice cream 10

Extended cooling function 11

Adjusting settings 11

Installation 12-13

Electrical connection (UK only) 12

Electrical connection (European countries) 13

Positioning 14

Contact details 14-15

Guarantee 14

Environmental note

Note: Before discarding an old appliance, switch off and

disconnect it from the power supply. Cut off and render any plug

useless. Cut the cable off directly behind the appliance to prevent

misuse. This should be undertaken by a competent person. Disable

the door lock to make sure that children cannot get stuck inside

the appliance.

o The packaging materials that Baumatic uses are environmentally

friendly and can be recycled.

o Please discard all packaging material with due regard for the

environment.

Specifications of your GELATO1SS

Congratulations on purchasing a Baumatic ice cream maker

o Push button/control knob operation

o Capacity: 1.5 litres

o Churning and chilling time: 10 – 60 minutes

o Timer dial

o ON/OFF button

o Transparent cover

o Removable ice cream bowl

o Fixed bowl with mixing arm

o Stainless steel exterior

Dimensions of appliance

Height: 245 mm

Width: 402 mm

Depth: 281 mm

Description of the appliance

Using your Baumatic ice cream maker

Before switching on

o Make sure that it has been installed by a suitably qualified

person, as per the information contained in Baumatic’s

installation instructions.

o After delivery, wait for a couple of hours before connecting the

appliance to your mains supply. This will allow any oil from the

compressor that may have been disturbed during the

transportation process to settle.

o The outside of the appliance and the removable accessories

contained within it, should be cleaned with a solution of liquid

detergent and water.

o The interior of the appliance should be cleaned

with a solution of sodium bicarbonate dissolved in

lukewarm water. The interior and accessories

should be thoroughly dried, after the cleaning

process has been completed.

o There can be an odour when you first switch on the appliance. It

will lessen when the appliance is used.

Prior to making ice cream

o Your appliance MUST be placed on a flat surface, to ensure that

the built in compressor operates properly.

o The appliance MUST have 20 cm of space each side of it and the

ventilation slot should not be obstructed.

o IMPORTANT: The appliance MUST NOT be connected to your

mains supply until all of the steps below have been followed.

o Thoroughly wash all parts of the appliance that will come into

contact with ingredients and ice cream (including the fixed bowl,

removable bowl, mixing arm and transparent cover).

o Prepare the required recipe ingredients, by following your own

recipe or from one contained in this user manual.

o Place the prepared ingredients into the removable bowl.

IMPORTANT: There is no need to freeze the ingredients prior to

placing them inside the ice cream maker. The appliance has a

built in compressor which will do this.

o IMPORTANT: DO NOT fill the removable bowl more than 80%

full, as the contents will expand during the cooling process and

there is the chance of the bowl overflowing.

o Place the removable bowl inside of the fixed bowl and then place

the mixing arm inside of the removable bowl. The mixing arm

should just rest inside the centre of the bowl, with the circle side

facing upwards.

o Insert the mixing arm into the socket that is found in the base of

the motor section. IMPORTANT: You must ensure that the

mixing arm is securely fixed into the socket.

o Place the transparent cover on the top of the appliance, making

sure that it is firmly fixed in position. Finally make sure that the

small lid is securely in place on the transparent cover.

Making ice cream

o Connect your appliance to your mains supply, making sure that

the electrical connection information contained in this booklet

has been read and followed.

o Press the ON/OFF button and then set the required time by

turning the timer dial.

o A 40 minute time setting will give soft textured ice cream, the

default operating time of 50 minutes will give medium textured

ice cream and a 60 minute time setting will give hard textured

ice cream.

o The LCD display will show the temperature progressively

decreasing as the appliance begins to function. It will indicate

that it has entered its cooling phase by showing the temperature

it’s reached.

o When the countdown period ends, the cooling process will end

automatically and an audible signal will sound.

o Switch the appliance off using the ON/OFF button and unplug the

appliance from your mains supply.

Removal and storage of ice cream

IMPORTANT: Before attempting to remove the

ice cream, YOU MUST disconnect the appliance

from your mains supply.

o Take out the removable bowl from the fixed bowl.

o The removable bowl should not be used for long term storage of

ice cream in a freezer. The maximum time period that the

removable bowl should be placed in a freezer for is 30 minutes.

If the removable bowl is placed in a freezer for longer than this,

it may be damaged.

o If you wish to store the ice cream for longer than 30 minutes,

then you should use a plastic scoop or wooden spoon to remove

the ice cream. IMPORTANT: DO NOT use a metal scoop or

spoon to remove the ice cream; otherwise the removable bowl

will get scratched.

o Once removed, you should place the ice cream in a plastic,

airtight container. We do not recommend that ice cream made

in this appliance is stored for a prolonged period. After 1 – 2

weeks, the structure of the ice cream will deteriorate and the

fresh taste will be lost.

o You should ensure that the freezer is maintaining a temperature

of at least -18°.

o You should mark the date that you prepared the ice cream on

the lid of the container.

o If you partially or fully defrost the ice cream, then DO NOT

refreeze it.

o Thoroughly wash all parts of the appliance that came into

contact with the ingredients and ice cream (including the fixed

bowl, removable bowl, mixing arm and transparent cover).

Extended cooling function

o After the ice cream making process has completed, if the

appliance is not switched off within 10 minutes, then it will enter

the extended cooling function.

o The extended cooling function will keep the ice cream frozen and

stop it from defrosting.

o The extended cooling function will run for a maximum of 1 hour,

after which the appliance will enter stand-by mode. After 1 hour,

the ice cream will no longer remain frozen.

Adjusting settings

o If you wish to stop the ice cream making process before the

countdown time has elapsed, you should press the ON/OFF

button.

o Whilst a countdown time is in progress, it is possible to adjust

the countdown time by turning the timer dial to your required

setting.

o When the appliance has finished a countdown time, if the ice

cream is not to your required consistency then it is possible to

extend the cooling time. Turn the timer dial to your required

additional countdown time.

Electrical connection (European countries)

Your ice cream maker comes supplied with a European plug.

o As the colours of the wires in the appliance’s mains lead may not

correspond with the coloured markings identifying the terminals

in your spur box, please proceed as follows:-

The brown wire must be connected to the right hand terminal.

The blue wire must be connected to the left hand terminal.

o When the connection is completed, no stray strands or cut wire

should be present. The cord clamp must be secured over the

outer sheath.

Positioning

o Your appliance should not be located in direct sunlight or

exposed to continuous heat or extremes of temperature (e.g.

next to a radiator or boiler). If this is not feasible, then you

should install an insulation plate between the appliance and the

adjacent heat source.

o You should check whether there is an electrical socket available,

which will be accessible after your appliance is installed.

o Place the appliance flatly and firmly on a solid base.

o The appliance MUST have 20 cm of space each side of it and the

ventilation slot should not be obstructed.

IMPORTANT: If your appliance appears not to be

operating correctly, then you should disconnect it

from your mains supply and then contact

Baumatic Customer Care on telephone number

(0118) 933 6911 for guidance.

* If you are not based in the UK, then please refer to the

telephone number for the relevant Baumatic country on the

next page for guidance.

DO NOT ATTEMPT TO REPAIR THE APPLIANCE YOURSELF.

IMPORTANT: Baumatic Ltd. operates a policy of continuous

improvement and reserves the right to adjust and modify its

products without prior notification.

Produkt Specifikationer

Mærke:	Baumatic
Kategori:	Ismaskine
Model:	GELATO1SS
Bredde:	402 mm
Dybde:	281 mm
Højde:	245 mm
Produktfarve:	Rustfrit stål
Skål volumen:	1.5 L
Forberedelsestid:	60 min.