BDI Revo 9981 Manual


Læs gratis den danske manual til BDI Revo 9981 (3 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 21 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 11 anmeldelser. Har du et spørgsmål om BDI Revo 9981, eller vil du spørge andre brugere om produktet?

Side 1/3
1
Your Revo Home Theater Furniture is engineered for easy
assembly. Carefully follow this procedure to prevent any damage.
Placement and Maintenance
Revo Home Theater Furniture is designed for indoor use on level
floors. Clean glass with glass cleaner, and steel parts and wood
veneer with a moist cloth.
Step 1
Unpack and identify the parts listed above. The assembly
workspace should be a non-marring surface such as carpet. For
missing hardware pieces, please contact BDI Customer Service
at customerservice@bdiusa.com. For all other concerns, please
contact your BDI Retailer.
Step 2
Revo 9981 features a swiveling base. Note that Swivel-Lock Pins
(F) are factory-installed at Position 1 enabling the stand to swivel
15-degrees to left and 15-degrees to right.
To lock the stand in a fixed position, use provided Allen Wrench
(E) Swivel-Lock Pins (F) Position 1 (factory to remove both from
position) Position 2. and re-install them at
Revo
Component List
Designed by Louis Lara.
These distinctive product configurations are protected by US and international
patents, trade dress, and/or copyright laws.
BDI are trademarks of Becker Designed, Inc. All Rights reserved. ©2009, BDI
9981REV092409v8
a s s e m b l y i n s t r u c t i o n s
bdiusa bdiusa.com customerservice@ .com
9981
D - Phillips Screwdriver
x 1
E - Allen Wrench x 1
C - Retention Clip x 8
Pre-installed
A - Glass Shelf x 2
B - Shelf Pin x 8
Pre-installed
F - Swivel-Lock Pin x 2
Pre-installed
Front
Position 2
Position 1
F
NOTE: Choosing not to use the
Swivel-Lock Pins (F) will enable
360-degrees of rotation.
2assembly instructions
bdiusa bdiusa.com customerservice@ .com
Step 2
Confirm that are pre-installed.Shelf Pins (B)
In order to adjust height, one must remove
the glass retention clip (secured by the
shelf pin) that holds the glass shelves in
place.
Loosen the 4 1. Shelf Pins (B)
Phillips Screwdriver 1 turn with
(D).
Remove 2. Retention Clips (C) ( x 4 )
Unscrew 3. Shelf Pins (B) completely
Reposition the 4. Shelf Pins (B) at
desired height
Secure Glass Shelves
To secure the shelves on your Revo unit, it is
necessary to use the Retention Clip (C), which
is secured by the Shelf Pin (B).
Install 5. Glass Shelves (A x 2)
Install 6. Retention Clips (C) as shown in
Pin Assembly Diagram”
Secure by tightening the7. Shelf Pin (B)
Phillips Screwdriver (D).with
A x 2
Retention clip (C)
Shelf pin (B)
Detail of Shelf Pin (B) and
Retention Clip (C)
1
1
44
1 : Retention clip (C)
2 : Glass Shelf (A)
3 : Shelf Pin (B)
4 : Cabinet wall
Pin Assembly Diagram


Produkt Specifikationer

Mærke: BDI
Kategori: Ikke kategoriseret
Model: Revo 9981

Har du brug for hjælp?

Hvis du har brug for hjælp til BDI Revo 9981 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret BDI Manualer

BDI

BDI Corridor 8108 Manual

5 September 2024
BDI

BDI LINQ 6821 Manual

5 September 2024
BDI

BDI Revo 9981 Manual

2 September 2024
BDI

BDI Margo 5211 Manual

29 August 2024
BDI

BDI Modica 6347 Manual

29 August 2024
BDI

BDI Sequel 6052 Manual

29 August 2024
BDI

BDI Corridor 8173 Manual

28 August 2024
BDI

BDI Sequel 6005A Manual

28 August 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer