BDI Corridor 8173 Manual

BDI Ikke kategoriseret Corridor 8173

Læs gratis den danske manual til BDI Corridor 8173 (5 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 30 personer og har en gennemsnitlig bedømmelse på 4.1 stjerner ud af 15.5 anmeldelser. Har du et spørgsmål om BDI Corridor 8173, eller vil du spørge andre brugere om produktet?

Side 1/5
Product Registration
Registering your new BDI product allows us to send you important
product updates, service information and helpful hints related to your
BDI products. Register today and you will be entered to win free a BINK
table from BDI. www.bdiusa.com/product-registration/
Placement and Maintenance
Corridor® Media furniture is designed for indoor use on level floors.
Clean glass with glass cleaner, and steel parts and wood veneer with a
moist cloth.
Your Corridor® Media furniture is engineered for easy assembly.
Carefully follow this procedure to prevent any damage.
Do not use power tools for assembly of this product.
Step 1
Unpack and identify the parts listed below. The assembly workspace
should be a non-marring surface such as carpet. For missing
hardware pieces, please contact BDI Customer Service at
customerservice@bdiusa.com. For all other concerns, please
contact your BDI retailer.
For your convenience, wheel assembly is pre-installed. Wheels can
be removed if desired.
bdiusa.com
customerservice@bdiusa.com
CORRIDOR® 8173
LOW MEDIA CONSOLE
B1 Hex Wrench x 1
A Phillips Screwdriver x 1
C Cabinet x 1
D 1/4-20 x 10 mm
Machine Screw x 16
H M4 x 35 mm
Machine Screw x 8
I Door Pull x 4
K Glass Top x 1
Reinstall toLeveler Metal Leg
E.
E
B2 Hex Wrench x 1
G 1/420 x 60 mm
Machine Screw x 6
E Metal Leg x 2
F Metal Rail x 2
Removal of wheels:
Detach Wheel Assembly from
Metal Leg E by removing the
Leveler and Screw.
E
J Rubber Bumper x 8
N Back Panel x 2
L Adjustable Shelf x 2
M Adjustable Shelf x 1
Designed by Matthew Weatherly.
These distinctive product configurations are protected by US and international patents, trade dress, and/or
copyright laws. Corridor & BDI are trademarks of Becker Designed, Inc. All rights reserved. ©2016, BDI
Made in China. 05.09.2016 V2
bdiusa.com
customerservice@bdiusa.com
CORRIDOR 8173
LOW MEDIA CABINET
2
Step 2 - Build Base Assembly
Slide intoMetal Leg E Metal Rail F and attach by using Hex Wrench B1 Screw Dand .
Step 3 - Cabinet C Hex Wrench B1Carefully lay on its back. Using , attach the base assembly to the bottom
of the Cabinet C with andScrew D Screw G. *Note: Each of the metal legs has levelers that can be adjusted
using the Hex Wrench B2.
D
D
D
D
G
G
G
G
G
G
C
G x 6
D x 8
D D
D D
E E
F
F
¨
¨
¨
¨
D x 8


Produkt Specifikationer

Mærke: BDI
Kategori: Ikke kategoriseret
Model: Corridor 8173

Har du brug for hjælp?

Hvis du har brug for hjælp til BDI Corridor 8173 stil et spørgsmål nedenfor, og andre brugere vil svare dig