Bertazzoni HK36HERFDBXV Manual

Bertazzoni Ikke kategoriseret HK36HERFDBXV

Læs gratis den danske manual til Bertazzoni HK36HERFDBXV (1 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 30 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 15.5 anmeldelser. Har du et spørgsmål om Bertazzoni HK36HERFDBXV, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/1

A x4

B x4

C x1

HANDLE INSTALLATION ON CUSTOM CABINETS

In case a custom cabinet panel is to be mounted on any of the models listed below with Bertazzoni handles,it will be necessary to install brass tapping inserts in order to

secure the handle properly on the custom panel.

SUGGESTED HANDLE INSERT FOR PANELS - M5 x 0.8 MM BRASS TAPPING INSERTS

Recommended drill bit size to drill the pilot hole is 3/8"

Suitable inserts can be ordered at www.encompassparts.com

Part Number: 95631A100, contains n°4 M5 brass hardwood inserts and 1 M5 installation bit

Do not use a power tool to mount the inserts. Installation of the inserts with improperly calibrated power tools risk damaging the panels.

3070992-revA