Biltema 40-060 Manual

Biltema Ikke kategoriseret 40-060

Læs gratis den danske manual til Biltema 40-060 (1 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 48 personer og har en gennemsnitlig bedømmelse på 4.2 stjerner ud af 24.5 anmeldelser. Har du et spørgsmål om Biltema 40-060, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/1

HA-18 TIMER OPERATING INSTRUCTIONS

SET FEEDING TIME

1.CONNECT STORAGE BATTERY LEADS.

1.1 WHEN POWER IS ON, IF THE TWO DOTS ON DISPLAY ARE NOT FLASHING, PLEASE REMOVE POWER

LINE FROM BATTERY AGAIN, AFTER ONE MINUTE TO CONNECT AGAIN, THUS TO RESET IT ENOUGH.

1.2

THE TIMER CAN WORK WHEN ONLY POWERED BY STORAGE BATTERY. WHEN POWER IS REMOVED

, YOUR SETTING

VALUE WILL BE CLEAR. PLEASE SET AGAIN WHEN POWER IS ON AGAIN.

1.3

IF WISH TO SAVE SETTING VALUE DURING POWER IS OFF, PLEASE MOUNT THE ACCESSORY CELL(LIT

HIUM

CELL CR2032) TO AS RESERVE POWER FOR MEMORY.

1.4

IF NOT WORK,NOT DISPLAY OR SETTING NOT BE SAVED, PLEASE REPLACE THE FRESH CELL

(CR2032) INSIDE

THE TIMER

2.SET CURRENT TIME BY PRESSING THE DESIGNATED HR AND MIN BUTTONS. “ ” “ ”

3.BRIEFLY PRESS AND RELEASE THE “ ”PROG BUTTON TO DISPLAY “ ”SPIN (1-6). PRESS “ ”HR AND “ ”MIN

BUTTONS TO SET DESIRED SPIN TIME. “ ”

4.PRESS AND RELEASE PROG BUTTON AGAIN TO DISPLAY THE ASSOCIATED SPINTIME (1-6). USE HR“ ” “ ” “ ”

AND MIN BUTTONS TO SET SPIN TIME (0-60 SECONDS). “ ” “ ”

5.REPEAT STEPS 3 AND 4 FOR SETTING ADDITIONAL SPIN CYCLES. IMPORTANT NOTE: FOR SIMPLICITY OF PROG“ ”

NAVIGATION, THE DEFAULT SETTING FOR SPINS IS SET TO OFF . THIS RESULTS IN SPIN (4-“ ” “ ” “ ”

BEING HIDDEN. ENABLING “ ”SPIN3 WILL UNHIDE “ ”SPIN4 ONLY. EACH SUBSEQUENT “ ”SPIN

MUST BE ENABLED

TO MAKE ALL 6 SPIN CYCLES AVAILABLE. “ ”

MOTOR SPEED CONTROL

1.PRESS AND HOLD THE PROG BUTTON UNTIL MOTOR SPEED IS DISPLAYED. USE HR AND MIN“ ” “ ” “ ” “ ”

BUTTONS TO SELECT DESIRED MOTOR SPEED. AVAILABLE SPEED SELECTIONS ARE LOW , MID & HI .‘ ” “ ” “ ”

SYSTEM TEST

1.PRESS TEST BUTTON. (WARING: MOTOR DISCHARGES FEED AT HIGH VELOCITY!) “ ”

CLEAR MEMORY

1.PRESS AND HOLD PROG HR AND MIN BUTTONS FOR 5 SECONDS TO RESET ALL FEED TIMES. “ ”，“ ” “ ”

RUN AND SOLAR CHARGER LED LIGHT

1.THE RUN LED LIGHT WILL BE LIGHTED AND FLASHING QUICKLY MORE AND MORE 1 MINUTE BEFORE RUN.

AFTER SOLAR PANEL IS INSTALLED AND CHARGING, THE SOLAR LED LIGHT WILL BE FLASHING

PLEASE NOTE: THE BATTERY MUST BE LEAD ACID STORAGE BATTERY TYPE. －

WIRE CONNECTION FOR TIMER

No. 1 2 3 4 SOLAR PANEL PLUG

ITEM

BATTERY

(+)

BATTERY

(-)

MOTOR

(+)

MOTOR

(-)

SOLAR

(+)

SOLAR

(-)

COLOR

RED BLACK ORANGE BLUE WHITE BROWN

Produkt Specifikationer

Mærke:	Biltema
Kategori:	Ikke kategoriseret
Model:	40-060

Har du brug for hjælp?

Hvis du har brug for hjælp til Biltema 40-060 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Biltema Manualer

Biltema 18-688 Manual

11 Juli 2025

Biltema DLM 2030 E Manual

10 Juli 2025

Biltema 45-7917 Manual

9 Juli 2025

Biltema 24-6912 Manual

9 Juli 2025

Biltema SLM 2025 Manual

9 Juli 2025

Biltema 29-932 Manual

9 Juli 2025

Biltema 30-044 Manual

20 Juni 2025

Biltema 30-059 Manual

19 Juni 2025

Biltema 30-046 Manual

19 Juni 2025

Biltema 14-183 Manual

18 Juni 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Yamazen RS-14734CJH Manual

11 Juli 2025

Prima Prostate Test-PSA Manual

11 Juli 2025

Yamazen NUMF-E306 Manual

11 Juli 2025

Philips Sonicare 5500 Series HX7111 Manual

11 Juli 2025

Microchip USB5926C Manual

11 Juli 2025

Yamazen MNR-12874CJ Manual

11 Juli 2025

Yamazen YWC-193SFK Manual

11 Juli 2025

Blustream AD11AU Manual

11 Juli 2025

RGBlink Q16pro Manual

11 Juli 2025

Yamazen CV-1825 Manual

11 Juli 2025