Binatone E3250 - Big Button Manual

Binatone Telefon E3250 - Big Button

Læs gratis den danske manual til Binatone E3250 - Big Button (46 sider) i kategorien Telefon. Denne vejledning er vurderet som hjælpsom af 31 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 16 anmeldelser. Har du et spørgsmål om Binatone E3250 - Big Button, eller vil du spørge andre brugere om produktet?

Side 1/46
Important note — emergency calls
The 3250 is not designed for making emergency e
calls when the mains power fails. So you should
make alternative arrangements for access to
Emergency Se vices.r
(This means that you should also have a basic
phone that does not need mains powe , connectedr
to your line so that you can make calls during a
power failure.)
If you need help …
The Binatone Help Line is available from 9.00 am to
5.00 pm, Monday to Frida , ony
01325 304 473
Unpacking your e3250
In the box are:
the (up to six, depending oncordless handset
which 3250 system you have bought)e
the base unit
rechargeable and a batteries battery
compartment cover for each handset
a for the base unittelephone line cable
a for the basemains power lead and adapter
unit
up to five , each with a separatecharger pods
mains power lead and adapter.
Keep the packaging materials in a safe place in
case you later need to transport the unit.
Keep your sales (till) receipt, which is your
guarantee.
E:\Binatone2003\e3 00\e3 00.vp4 4
11 March 2003 10:09:02
Color profile: Generic CMYK printer profile
Composite Default screen
Downloaded from manuals search enginewww.Manualslib.com
Where to find it
Before you can use the handset to make calls
you will need to fit and fully charge the
batteries, as described on pages 4 and 5.
Please read the notes on pages 2 and 3
before you install the base unit.
PROG button
Press to start programming.
Press during a call to make
a note of a number in the
Notebook.
EARPIECE
too close to your ear
while the handset is ringing — the
ringing gets louder as it continues.
Don’t hold this
UP and DOWN buttons▲ ▼
Press during a call to adjust the volume
in the earpiece.
Press to move through the list of stored
numbers or Caller Display records.
R (Recall) button
e
You may need this
during a call if your
3250 is connected to a
PBX, or if you use BT’s
Select Services.
MEMORY button
Press to store numbers in
memory and to make
calls to stored numbers.
HANDSET LOCATOR button
Press to make all registered
handsets ring, (useful if
you've forgotten where you
put a handset).
IN USE light
This comes on when any
of the handsets registered
to this base is on an
PHONE /OK button
Press to begin or answer a
telephone call.
Press while programming to
confirm your selection.
If the display is blank
Press the button
to switch the handset on
When this shows ‘nearly empty’ ( ), put the handset onto
the base unit or charger pod as soon as possible, to charge
the batteries. While the batteries are being charged, this
s
y
mbol blinks.
Symbols on the display
The handset’s
number (1 if you
have a single system,
1, 2 or 3 if you have
a Twin or Triple
system)
The time is shown if you’ve
set the handset’s clock
The base unit’s number (1,
unless you have registered
your handset to more than
one base unit)
Intercom
call
Memory/
store
Indirect
network
Redialling
Caller
Display
This appears when the handset is dialling a non-local
number via an alternative network.provider’s
This appears when you’re using Last Number Redial.
This appears when you’re checking, or dialling from, the list
of Caller Display records.
This appears when the keypad is locked, or when
has been turned on.Call Barring
This flashes while your handset is ringing for an intercom call,
and comes on steadily when the call’s connected.
This comes on when you’re storing numbers in memory, and
when you’re making calls to stored numbers.
Keypad
locked
Signal
level
This shows the strength of the signal between the handset
and base unit. It flashes while the handset is trying to
establish a radio link . .
to the base unit If this symbol flashes
while you’re on a call, move closer to the base unit
Battery
charge
level
New call This appears when you missed incoming calls (even if you
do not use Caller Display).
What the symbols mean
The duration of each call is shown on the display from 20 seconds
after you press the PHONE button for a line, until 5 seconds after
you end the call.
E:\Binatone2003\e3 00\e3 00_07.vp4 4
11 March 2003 10:09:39
Color profile: Generic CMYK printer profile
Composite Default screen
HANG UP / C (Cancel) button
1 second
3 seconds
Press to hang up at the end of a call.
Press for to lock the
keypad; or for to turn the
handset on and off.
While dialling or programming,
press briefly to delete digits from
the display; or press and hold to
clear the display.
LNR/ CDS/ AUSE buttonP
Press ONCE to make a repeat call
to one of the last five numbers
you dialled.
Press TWICE to see a list of Caller
Display records.
Press to generate pauses when
using the phone on a PBX.
INT ( ) button
Press to make an
intercom call.
SCROLL ( ) buttons
When a long number
#
(more than 16 digits) is
shown on the displa ,y
press these to scroll along
the digits.
external call.
Downloaded from manuals search enginewww.Manualslib.com


Produkt Specifikationer

Mærke: Binatone
Kategori: Telefon
Model: E3250 - Big Button

Har du brug for hjælp?

Hvis du har brug for hjælp til Binatone E3250 - Big Button stil et spørgsmål nedenfor, og andre brugere vil svare dig