Bixolon SRP-380II Manual

Bixolon Printer SRP-380II

Læs gratis den danske manual til Bixolon SRP-380II (4 sider) i kategorien Printer. Denne vejledning er vurderet som hjælpsom af 5 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 3 anmeldelser. Har du et spørgsmål om Bixolon SRP-380II, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

◈

Information

Information Information

This installation guide contains quick information required for the product

installation. Please refer to the Software and Documents provided on the

Download section of the BIXOLON Website ( ) for more www.bixolon.com

information on how to setup.

1. Ma , etc. nual: User’s Manual, Code Table, Control Commands

2. Driver: Windows, OPOS, CUPS (Linux, Mac), VCOM (USB, Ethernet)

3. SDK: UPOS SDK (Windows, Android, iOS)

4. Utility: Unified POS Utility, Net Configuration Tool, Android Utility, iOS Utility

We at BIXOLON maintain ongoing efforts to enhance and upgrade the functions

and quality of all our products. In following, product specifications and/or user

manual content may be changed without prior notice.

Please refer to the BIXOLON website for the addresses and phone numbers of

the company's headquarters and branch offices.

◈

Components

Components Components

SRP-380plus 82plus /3

DK Gender

Cable Cover

USB A-B Cable

Installation Guide

AC/DC Adaptor

Power Cord

Paper Roll

◈

Cable Connection

Cable ConnectionCable Connection

1. Turn off the printer and peripheral devices.

2. Connect the power cord to the adapter and connect the adapter to the power

supply connector of the printer.

3. Check the type of the interfaces at the back of the printer (USB, Serial,

Parallel, Ethernet, Powered USB, Wireless LAN, Bluetooth and connect the )

interface cable.

4. Connect the drawer kick-out cable to the drawer kick-out port located on the

underside of the printer.

- Be sure t

- Be sure t- Be sure to turn off the

o turn off the

o turn off theo turn off the printer and con

printer and con

printer and con printer and connect or disc

nect or disc

nect or discnect or disconnect

onnect

onnect onnect

the adapte

the adaptethe adapter jack.

r jack.

r jack. r jack.

-- Only use a

Only use a

Only use aOnly use a power supply pr

power supply pr

power supply pr power supply provided by Bixol

ovided by Bixol

ovided by Bixolovided by Bixolon

onon

- Pay attentio

- Pay attentio- Pay attention to the dire

n to the dire

n to the diren to the direction in which you

ction in which you

ction in which youction in which you insert the

insert the

insert the insert the

adapter ja

adapter ja adapter jack.

ck.

ck. ck.

◈

Installing Paper Roll

Installing Paper Roll Installing Paper Roll

1. Push the Cover Open Button to open the

Printer Cover.

2. Insert new roll paper in the correct

direction.

3. Pull the paper out slightly and close the

Printer Cover.

When closing the cover, press down on the center of the cover

to ensure that the paper is in contact with the roller. Printing

quality may not be optimum if the recommended paper is not

used.

◈

Using Control Panel

Using Control PanelUsing Control Panel

•

•• Power (LED)

The Power LED is on whenever the printer is on.

•

•• Error (LED)

Red light will be on in various error conditions such as out of

paper, cover open, etc.

•

•• Paper (LED)

Red LED will be lit when the paper roll is running low.

The LED keeps blinking when the printer is in self-test standby

mode or macro execution standby mode.

•

•• Feed (Button)

Press this button to feed the paper out.

Hold down this button to feed out the paper continuously.

◈

Self-Test

Self-Test Self-Test

You can check whether printer works correctly or not through the self-test.

Printing quality, ROM version, and memory switch settings can be checked

through the self-test function.

1. Check whether paper is mounted correctly.

2. Turn on the power while holding down the Feed button and the self-test

procedure will begin.

3. The printer will print out the current status of printer including the version of

ROM.

4. After printing out the current status of printer, the printer will print following

lines and waits for the next step (paper lamp will keep blinking).

Self-TEST

Self-TESTSelf-TEST PRINT COMPL

PRINT COMPL

PRINT COMPL PRINT COMPLETE

ETE

ETEETE

SELECT M

SELECT MSELECT MODE BY PRESSIN

ODE BY PRESSIN

ODE BY PRESSINODE BY PRESSING THE

G THE

G THEG THE FEED BUTTON.

FEED BUTTON.

FEED BUTTON. FEED BUTTON.

End of S

End of SEnd of SELF-TEST

ELF-TEST

ELF-TEST ELF-TEST : Less than 1 secon

: Less than 1 secon

: Less than 1 secon: Less than 1 second

d d

VMSM Selecti

VMSM SelectiVMSM Selection : 1 se

on : 1 se

on : 1 seon : 1 second or more

cond or more

cond or morecond or more

5. Press the Feed button to resume printing or hold down the button for at

least one second to change the VMSM settings.

5- SELF- 1 If “Continuous TEST” is selected

(1) Press the Feed button for less than one second to print the preset page.

(2) The self test ends automatically as it prints the following line and cuts -

the paper.

*** COMP

*** COMP*** COMPLETED ***

LETED ***

LETED *** LETED ***

(3) The printer goes into normal print mode upon completion of the self

test.

5- 2 If “VMSM Selection” is selected

(1) The following lines will be printed when the VMSM opens.

** VMSM Sele

** VMSM Sele** VMSM Selection **

ction **

ction **ction **

0 : Exit and reb

0 : Exit and reb0 : Exit and reboot printe

oot printe

oot printeoot printer

r r

1 : Print curre

1 : Print curre1 : Print current settings

nt settings

nt settingsnt settings

2 : Set Pri

2 : Set Pri2 : Set Print Density

nt Density

nt Density nt Density

3 : Set Pri

3 : Set Pri3 : Set Print Speed

nt Speed

nt Speed nt Speed

4 : Set Cutting

4 : Set Cutting4 : Set Cutting mode

mode

mode mode

5 : Set Buz

5 : Set Buz5 : Set Buzzer

zer

zer zer

6 6 Set Near-

Set Near-

Set Near-Set Near-End Sensor

End Sensor

End SensorEnd Sensor

: :

7 : Set Serial

7 : Set Serial 7 : Set Serial Interface

Interface

Interface Interface

(2) Press the Feed button to run the above function.

▶ Step 1(Select Options): press the button a number of times as shown

by each menu.

▶ Step 2(Enter Options): hold down the button for at least one second

to apply each item selected.

If you select any items not listed above, the list of “VMSM

Selection” will be printed again. Setting the mode will be canceled

if no item is selected in Step 1.

If “0: Exit and reboot printer” is not executed, the new settings will

not be saved.

(3) Hold down the Feed button for at least 1 second to save the changes.

The following line will be printed before cutting the paper.

*** COMP

*** COMP*** COMPLETED ***

LETED ***

LETED *** LETED ***

6. The new settings will be automatically applied when printer resets.

Printer Instal

Printer InstalPrinter Installation Gu

lation Gu

lation Gulation Guide

ide

ideide & Safety

& Safety

& Safety & Safety Guide

Guide

GuideGuide

KN04-

KN04-KN04- A (V1

A (V1

A (V1A (V1.01)

.01)

.01) .01)

00237

0023700237

THERMAL RE

THERMAL RETHERMAL RECEIPT PRINTER

CEIPT PRINTER

CEIPT PRINTERCEIPT PRINTER SRP-380/382plus

SRP-380/382plus

SRP-380/382plus SRP-380/382plus

Power Jack

Ethernet

Cable

Interface Cable

(Serial/Parallel/Powered USB/

Wireless LAN/Bluetooth)

AC/DC Adapter

Adapter Jack

Interface port

USB

Cable

Ethernet Port

USB Port

Power Port

Drawer

Kick-out

Port

Drawer

Kick-out

Cable

Produkt Specifikationer

Mærke:	Bixolon
Kategori:	Printer
Model:	SRP-380II

Har du brug for hjælp?

Hvis du har brug for hjælp til Bixolon SRP-380II stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Printer Bixolon Manualer

Bixolon SRP-380II Manual

4 August 2025

Bixolon SRP-270AG Manual

12 September 2024

Bixolon SRP-352plusII Manual

11 September 2024

Bixolon SPP-R200II Manual

9 September 2024

Bixolon SRP-E302 Manual

25 August 2024

Bixolon SPP-R310plus Manual

11 August 2024

Bixolon SRP-270 Manual

6 August 2024

Bixolon SRP-275AUG Manual

4 August 2024

Bixolon SRP-270CU Manual

3 August 2024

Bixolon SRP-270C Manual

1 August 2024

Printer Manualer

Nyeste Printer Manualer

Dascom Tally 2610+ Manual

5 December 2025

Avision AP233QN Manual

5 December 2025

CUSTOM P3X Manual

5 December 2025

OKI MicroLine 5590eco Manual

5 December 2025

Avision AM233QW Manual

5 December 2025

Avision AM240AW Plus Manual

5 December 2025

Avision AM3321w Manual

4 December 2025

Avision AM4021w Manual

4 December 2025

Avision AM4332iw Pro Manual

4 December 2025

CUSTOM Q3X Manual

4 December 2025