Black And Decker BDCMTO Manual

Black And Decker Multiværktøj BDCMTO

Læs gratis den danske manual til Black And Decker BDCMTO (28 sider) i kategorien Multiværktøj. Denne vejledning er vurderet som hjælpsom af 27 personer og har en gennemsnitlig bedømmelse på 3.9 stjerner ud af 14 anmeldelser. Har du et spørgsmål om Black And Decker BDCMTO, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/28
INSTRUCTION MANUAL
OSCILLATING TOOL
ATTACHMENT
Thank you for choosing BLACK+ ! DECKER
PLEASE READ BEFORE RETURNING THIS PRODUCT FOR
ANY REASON.
If you have a question or experience a problem with your BLACK+ DECKER
purchase, go to http://www.blackanddecker.com/instantanswers
If you can’t find the answer or do not have access to the Internet, call
1-800-544-6986 from 8 a.m. to 5 p.m. EST Mon. - Fri. to speak with an agent.
Please have the catalog number available when you call.
SAVE THIS MANUAL FOR FUTURE REFERENCE.
VEA EL ESPA OL EN LA CONTRAPORTADA.N
INSTRUCTIVO DE OPERACIÓN, CENTROS DE SERVICIO Y PÓLIZA DE GARANTÍA.
ADVERTENCIA: LÉASE ESTE INSTRUCTIVO ANTES DE USAR EL PRODUCTO.
CATALOG NUMBERS
BDCMTO,
BDCMTOA
To register your new product, visit
www.BlackandDecker.com/NewOwner
2
WARNING:
Read all safety warnings and all instructions. Failure to follow the
warnings and instructions may result in electric shock, re and/or serious injury.
Save all warnings and instructions for future reference.
WARNING: Read all safety warnings and all instructions provided with
your Power Unit (BDCDMT112, BDCDMT120, or BDEDMT) before using
this attachment. Failure to follow the warnings and instructions may result in
electric shock, re and/or serious injury.
SPECIFIC SAFETY RULES
• Hold power tool by insulated gripping surfaces, when performing an operation where the cutting
accessory may contact hidden wiring or its own cord.Cutting accessory contacting a “live” wire
may make exposed metal parts of the power tool “live” and could give the operator an electric shock.
• Use clamps or another practical way to secure and support theworkpiece to a stable platform.
Holding the work by hand or against your body leaves it unstable and may lead to loss of control.
• Disconnect power before using tool near live wires or where there may be hidden wiring.
Cutting accessory contacting a “live” wire may make exposed metal parts of the power tool
“live” and could give the operator an electric shock.” Always check for hidden wiring, gas
lines, or other utilities before performing any material cutting or removal operations with the tool.
• .Wait for the cutter to stop before setting the tool down An exposed cutter may engage
the surface leading to possible loss of control and serious injury.
• Do not operate this tool for long periods of time. Vibration caused by the operating action
of this tool may cause permanent injury to fingers, hands, and arms. Use gloves to provide
extra cushion, take frequent rest periods, and limit daily time of use.
• Always hold the tool rmly with both hands for maximum control. Keep proper footing and
balance at all times. This enables better control of the power tool in unexpected situations.
• Do not restart the cutting operation in the workpiece. Let the tool reach full speed and
carefully re-enter the cut.
• Do not “jam” the cut-off saw blade or apply excessive pressure. Do not attempt to make
an excessive depth of cut.
• Keep your hands away from cutting area. Do not reach under the material being cut.
• Do not use dull or damaged blades. Bent blade can break easily or cause kickback.
Exercise extreme caution when handling the accessories. The accessories are very sharp.
Wear protective gloves when changing cutting accessories. Accessories become hot after
prolonged usage.
• Before scraping, check workpiece for nails. If there are nails, either remove them or set
them well below intended finished surface. Striking a nail with accessory edge could cause
the tool to jump.
• Do not wet sand with this tool. Liquids entering the motor housing are an electrical shock hazard.
• Never work in area which is soaked with a liquid, such as a solvent or water, or
dampened such as newly applied wallpaper. There is an electrical shock hazard when
working in such conditions with a power tool and heating of the liquid caused by scraping
action may cause harmful vapors to be emitted from workpiece.
• Do not use sandpaper intended for larger sanding pads. Larger sandpaper will extend
SYMBOL SIGNAL MEANING
SAFETY ALERT SYMBOL: DANGER, WARNING, OR CAUTION. Indicates 
Maybeusedinconjunctionwithothersymbolsorpictographs.
DANGER: Indicateshazardoussituationwhich,ifnotavoided,willresultindeathorseriousinjury.
WARNING: Indicateshazardoussituationwhich,ifnotavoided,couldresultindeathor
seriousinjury.
CAUTION: Indicatesahazardoussituationwhich,ifnotavoided,couldresultinminoror
moderateinjuryorpropertydamage.

Produkt Specifikationer

Mærke: Black And Decker
Kategori: Multiværktøj
Model: BDCMTO

Har du brug for hjælp?

Hvis du har brug for hjælp til Black And Decker BDCMTO stil et spørgsmål nedenfor, og andre brugere vil svare dig


Multiværktøj Black And Decker Manualer

Black And Decker

Black And Decker HPL108 Manual

30 Juli 2024
Black And Decker

Black And Decker BDCMTO Manual

26 Juli 2024
Black And Decker

Black And Decker MT300 Manual

26 Juli 2024
Black And Decker

Black And Decker BDCOS18N Manual

19 Juli 2024
Black And Decker

Black And Decker Matrix BDCMTR Manual

18 Juli 2024
Black And Decker

Black And Decker MTOS4 Manual

10 Marts 2024
Black And Decker

Black And Decker MT300SA2 Manual

31 August 2023
Black And Decker

Black And Decker BDCOS18 Manual

15 April 2023
Black And Decker

Black And Decker BDCDMT108 Manual

28 Marts 2023
Black And Decker

Black And Decker MT18 Manual

16 Februar 2023

Multiværktøj Manualer

Nyeste Multiværktøj Manualer

Makita

Makita TM3010C Manual

11 August 2025
Fein

Fein AFMT 12 QSL Manual

7 August 2025
Fein

Fein MultiMaster Top Extra FMM 350 QSL Manual

7 August 2025
Fein

Fein MultiTalent AFMT12QSL ALED Manual

7 August 2025
Fein

Fein FMT 250 SL Manual

7 August 2025
Fein

Fein Multimaster AMM 300 Plus Manual

7 August 2025
Bosch

Bosch GOP 18V-EC Professional Manual

7 August 2025
Fein

Fein MultiMaster Top FMM350QSL Manual

7 August 2025
Fein

Fein AFSC 18 QCSL Manual

7 August 2025
Fein

Fein Multimaster AMM 500 Plus Manual

7 August 2025