Black And Decker Matrix BDCMTR Manual

Black And Decker Multiværktøj Matrix BDCMTR

Læs gratis den danske manual til Black And Decker Matrix BDCMTR (24 sider) i kategorien Multiværktøj. Denne vejledning er vurderet som hjælpsom af 12 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 6.5 anmeldelser. Har du et spørgsmål om Black And Decker Matrix BDCMTR, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/24
INSTRUCTION MANUAL
ROUTER
ATTACHMENT
Thank you for choosing BLACK+ ! DECKER
PLEASE READ BEFORE RETURNING THIS PRODUCT FOR
ANY REASON.
If you have a question or experience a problem with your BLACK+ DECKER
purchase, go to http://www.blackanddecker.com/instantanswers
If you can’t find the answer or do not have access to the Internet, call
1-800-544-6986 from 8 a.m. to 5 p.m. EST Mon. - Fri. to speak with an agent.
Please have the catalog number available when you call.
SAVE THIS MANUAL FOR FUTURE REFERENCE.
VEA EL ESPA OL EN LA CONTRAPORTADA.N
INSTRUCTIVO DE OPERACIÓN, CENTROS DE SERVICIO Y PÓLIZA DE GARANTÍA.
ADVERTENCIA: LÉASE ESTE INSTRUCTIVO ANTES DE USAR EL PRODUCTO.
CATALOG NUMBER
BDCMTR
To register your new product, visit
www.BlackandDecker.com/NewOwner
2
WARNING:
Read all safety warnings and all instructions. Failure to follow the
warnings and instructions may result in electric shock, re and/or serious injury.
Save all warnings and instructions for future reference.
WARNING: Read all safety warnings and all instructions provided with
your Power Unit (BDCDMT112, BDCDMT120, or BDEDMT) before using
this attachment. Failure to follow the warnings and instructions may result in
electric shock, re and/or serious injury.
SPECIFIC SAFETY RULES
• Hold power tool by insulated gripping surfaces, because the cutter may contact its own cord.
Cutting a “live” wire may make exposed metal parts of the power tool “live” and shock the operator.
• Use clamps or another practical way to secure and support the workpiece to a stable platform.
Holding the work by your hand or against the body leaves it unstable and may lead to loss of control.
• Thiswillenablebettercontrolofthetool.Keep handles dry, clean, and free from oil and grease.
• Keep hands away from cutting area. Never reach under the workpiece for any reason.
Keep the router base rmly in contact with the workpiece when cutting. Hold the router
only by identied gripping surfaces as identied in this manual (see Using the Router).
Theseprecautionswillreducetheriskofpersonalinjury.
Kickback is a sudden reaction to a pinched, bound or misaligned router bit, causing an
uncontrolled router to lift up and out of the workpiece toward the operator.
• Keep your body positioned parallel to the direction of the cut, not behind the direction
of the cut.KICKBACK could cause the router to jump opposite the direction of the cut.
• Dullcuttersmaycausetheroutertoswerveorstallunderpressure.Use sharp cutters.
• Itmaybeextremelyhot.Never touch the bit immediately after use.
• IftheBe sure that the motor has stopped completely before you lay the router down.
cutterheadisstillspinningwhenthetoolislaiddown,itcouldcauseinjuryordamage.
• IfthebitisincontactBe sure that the router bit is clear of the workpiece before starting the motor.
withtheworkpiecewhenthemotorstartsitcouldmaketherouterjump,causingdamageorinjury.
• Only use router bits with a shank diameter of 1/4”.
• Only use router bits rated at least equal to the maximum speed marked on the tool.
• UseoflargerthanDo not use router bits with a diameter greater than 1-3/8” (35mm).
recommendedbitscanresultinahazard.
• Not intended to be used with a router table. Do not use the tool in an inverted position.
• Do not attempt to use the tool in a stationary mode.
• Make sure collet nut is securely tightened to prevent router bit from slipping during use.
WARNING:ALWAYS use safety glasses. Everyday eyeglasses are NOT safety glasses. Also
use face or dust mask if drilling operation is dusty. ALWAYS WEAR CERTIFIED SAFETY EQUIPMENT:
•ANSI Z87.1 eye protection (CAN/CPA Z94.3),
•ANSI S12.6 (S3.19) hearing protection,
•NOSH/OSHA respiratory protection.
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and
other construction activities contains chemicals known to the state of California to cause
cancer, birth defects or other reproductive harm. Some examples of these chemicals are:
•lead from lead-based paints,
 • crystalline silica from bricks and cement and other masonry products, and
 • arsenic and chromium from chemically-treated lumber.
SYMBOL SIGNAL MEANING
SAFETY ALERT SYMBOL: DANGER, WARNING, OR CAUTION. Indicates 
Maybeusedinconjunctionwithothersymbolsorpictographs.
DANGER: Indicateshazardoussituationwhich,ifnotavoided,willresultindeathorseriousinjury.
WARNING: Indicateshazardoussituationwhich,ifnotavoided,couldresultindeathor
seriousinjury.
CAUTION: Indicatesahazardoussituationwhich,ifnotavoided,couldresultinminoror
moderateinjuryorpropertydamage.

Produkt Specifikationer

Mærke: Black And Decker
Kategori: Multiværktøj
Model: Matrix BDCMTR

Har du brug for hjælp?

Hvis du har brug for hjælp til Black And Decker Matrix BDCMTR stil et spørgsmål nedenfor, og andre brugere vil svare dig


Multiværktøj Black And Decker Manualer

Black And Decker

Black And Decker HPL108 Manual

30 Juli 2024
Black And Decker

Black And Decker BDCMTO Manual

26 Juli 2024
Black And Decker

Black And Decker MT300 Manual

26 Juli 2024
Black And Decker

Black And Decker BDCOS18N Manual

19 Juli 2024
Black And Decker

Black And Decker Matrix BDCMTR Manual

18 Juli 2024
Black And Decker

Black And Decker MTOS4 Manual

10 Marts 2024
Black And Decker

Black And Decker MT300SA2 Manual

31 August 2023
Black And Decker

Black And Decker BDCOS18 Manual

15 April 2023
Black And Decker

Black And Decker BDCDMT108 Manual

28 Marts 2023
Black And Decker

Black And Decker MT18 Manual

16 Februar 2023

Multiværktøj Manualer

Nyeste Multiværktøj Manualer

Makita

Makita TM3010C Manual

11 August 2025
Fein

Fein AFMT 12 QSL Manual

7 August 2025
Fein

Fein MultiMaster Top Extra FMM 350 QSL Manual

7 August 2025
Fein

Fein MultiTalent AFMT12QSL ALED Manual

7 August 2025
Fein

Fein FMT 250 SL Manual

7 August 2025
Fein

Fein Multimaster AMM 300 Plus Manual

7 August 2025
Bosch

Bosch GOP 18V-EC Professional Manual

7 August 2025
Fein

Fein MultiMaster Top FMM350QSL Manual

7 August 2025
Fein

Fein AFSC 18 QCSL Manual

7 August 2025
Fein

Fein Multimaster AMM 500 Plus Manual

7 August 2025