Black Box ICI207A Manual

Black Box Computertilbehør ICI207A

Læs gratis den danske manual til Black Box ICI207A (2 sider) i kategorien Computertilbehør. Denne vejledning er vurderet som hjælpsom af 20 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 10.5 anmeldelser. Har du et spørgsmål om Black Box ICI207A, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

877-877-2269 | blackbox.com877-877-2269 | blackbox.com 877-877-2269 | blackbox.com

Page 5 Page 6

Black Box and the Double Diamond logo are registered trademarks of

BB Technologies, Inc. Any other trademarks mentioned in this manual

are acknowledged to be the property of the trademark owners

ICI207A, version 2

Quick Start Guide

Isolated and non-isolated models available.

Industrial Grade 7-Port USB Hubs

ICI207A

ICI208A

Black Box Tech

Support: FREE! Live.

24/7. Tech support

the way it should be.

Great tech support is just 60 seconds

away at 877-877-2269 or BlackBox.com.

Order toll-free in the U.S. or for

FREE 24/7 technical support:

Call 877-877-BBOX

(outside U.S. call 1-724-746-5500)

www.blackbox.com

info@blackbox.com

Contact

Information

Industrial Grade 7-Port USB Hub

Table 1. LED indicators.

LED Type State Description

External Power

External power is applied, and an active

host connection exists. The hub will

provide 500 mA per downstream port.

OFF No power is present.

Port LEDs 1–7

ON Port is active and ready for use.

OFF

Port has a fault. Power may need to be

cycled.

Troubleshooting

Problem: Do I need drivers for the hub?

Solution: No, the operating system will detect it and

install it automatically.

Problem: How can I be sure it has been installed?

Solution: The new hub will be listed in the Device

Manager.

Problem: Can I use USB 1.1 and USB 2.0 devices

together?

Solution: Yes. USB 2.0 is backwards-compatible with

USB 1.0 and 1.1.

SUITABLE FOR USE IN CLASS I, DIVISION 2,

GROUPS A, B, C AND D HAZARDOUS

LOCATIONS, OR NONHAZARDOUS LOCATIONS

ONLY.

WARNING - EXPLOSION HAZARD -

SUBSTITUTION OF ANY COMPONENT MAY

IMPAIR SUITABILITY FOR CLASS I, DIVISION 2.

WARNING - EXPLOSION HAZARD - DO NOT

DISCONNECT EQUIPMENT WHILE THE CIRCUIT IS

LIVE OR UNLESS THE AREA IS KNOW TO BE FREE

OF IGNITABLE CONCENTRATIONS.

INSTALL IN ACCORDANCE WITH CONTROL

DRAWING NUMBER 260-10135-00

877-877-2269 | blackbox.com877-877-2269 | blackbox.com 877-877-2269 | blackbox.com

Industrial Grade 7-Port USB Hub Industrial Grade 7-Port USB HubIndustrial Grade 7-Port USB Hub

Page 3Page 2 Page 4

What’s Included

Your package should include the following items. If

anything is missing or damaged, contact Black Box

Technical Support at 877-877-2269 or

info@blackbox.com.

• (1) Industrial Grade 7-Port USB Hub

• (1) USB cable

• (2) panel-mount adapters and (4) mounting screws

• (1) DIN rail adapter and (3) mounting screws

• This quick start guide

NOTE: A power supply is not included.

Overview

Figure 1 shows the front view of the hub. Figure 2

shows the side view.

To USB host

LED

indicators

Downstream

ports

Figure 1. Front view.

Detachable

terminal

block

Barrel power

plug

Figure 2. Side view

Installation Steps

Step 1: Mounting

DIN rail mounting: Attach the DIN rail bracket with

the flat surface of the bracket facing the back of the

hub, as shown in Figure 3.

DIN rail

bracket

Figure 3. DIN rail bracket attached to hub.

Panel mounting: Attach the panel-mount brackets to

either side of the hub. They can be attached in (4)

positions: up, down, forward, and backward.

Panel-mount

brackets

Figure 4. Panel-mount bracket positions.

Step 2: Connect the Power Supply

The isolated Industrial Grade 7-Port USB Hub (ICI207A

or ICI208A) will not operate without an external

power supply. You can use the detachable terminal

block input or the locking barrel jack. The terminal

block is polarity protected.

When powered, the ICI207A and ICI208A will provide

500 mA to each downstream port. They require 10

to 30 VDC of external power and will consume a

maximum of 16 W.

NOTE: The ICI208A adds 4-kV isolation.

Step 3: Grounding

We recommend that you ground the chassis. Connect

a grounding wire from the green ground lug to a

good source of earth ground.

Figure 5. Grounding the chassis.

Step 4: LED Status

Figure 6 shows the LEDs on the ICI207A and ICI208A.

Table 1 describes their functions.

Figure 6. ICI207A.

Produkt Specifikationer

Mærke:	Black Box
Kategori:	Computertilbehør
Model:	ICI207A
Bredde:	203 mm
Dybde:	120.7 mm
Højde:	34.9 mm
Vægt:	600 g
Produktfarve:	Sort
Pakkevægt:	881.7 g
Pakkedybde:	254 mm
Pakkebredde:	165.1 mm
Pakkehøjde:	63.5 mm
Relativ luftfugtighed ved drift (H-H):	0 - 95 %
Antal USB 2.0-porte:	8
Driftstemperatur (T-T):	-40 - 80 °C
Husmateriale:	Metal
LED-indikatorer:	Ja
Udgangsspænding:	5 V
Indbygget kortlæser:	Ingen
USB-drevet:	Ja
Dataoverførselshastighed:	480 Mbit/s
Porte, antal:	7
Hub-grænseflader:	USB 1.1, USB 2.0