Blaupunkt VX 170 2 VELOCITY Manual

Blaupunkt Bilhøjttaler VX 170 2 VELOCITY

Læs gratis den danske manual til Blaupunkt VX 170 2 VELOCITY (11 sider) i kategorien Bilhøjttaler. Denne vejledning er vurderet som hjælpsom af 38 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 19.5 anmeldelser. Har du et spørgsmål om Blaupunkt VX 170 2 VELOCITY, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/11

VX 130.2, VX 170.2, VX 170.3,

VRX 130.1, VRX 170.1, VRX 200.1

Notes on installation and operation

Hinweise zur Installation und Bedienung

Conseils pour l’installation et l’utilisation

INTRODUCTION

Congratulations on your purchase of the world’s ﬁnest brand of car audio speakers.

We have invested tremendous eﬀort in the design process of the new Velocity speaker series, in order to achie-

ve superior musical performance. For maximum performance and reliability we highly recommend that your new

Velocity speakers be installed by an authorized Velocity dealer.

For additional information on the Velocity Product Line visit our internet site at: http://www.velocity.de.

Safety Considerations

Before starting to mount your speaker, read the mounting and connection instructions carefully. Disconnect the

vehicle battery's negative terminal before making connections. Be sure to observe the safety notes of the Auto-

mobile manufacturer (airbags, alarm systems, onboard computers, immobilisers).

Before drilling holes, look to see what is on the other side- making holes into the battery, wiring looms or fuse

box is not recommended.

SOUND QUALITY VS. LOUDNESS

SOUND QUALITY

A good audio system will faithfully reproduce the original recording by oﬀering accurate frequency response and

staging. Good frequency response reproduces high tones such as cymbals, through human voices and most

instruments, and down to the very low tones from synthesisers and drums. Frequency response includes timbre

(the accurate replication of an instrument), linearity (the tonal quality is the same regardless of volume level),

and clarity (lack of distortion of the original signal). Velocity speakers address these properties by having a very

smooth frequency response with low distortion levels.

Good staging oﬀers the illusion of a stage upon which players are located and it has a sense of height, width,

and depth. Imaging is a sound system’s ability to correctly place the instruments on the imaginary stage. Again,

the Velocity speakers excel here due to angled tweeter mounting and smooth oﬀ-axis frequency response ensu-

ring accurate reproduction.

MULTI-CHANNEL/HIGH POWER

Moving up to a 4x50 watt satellite channel ampliﬁer powering four sets of components and a 2x100 watt sub-

woofer ampliﬁer powering a Velocity subwoofer can oﬀer stunning performance!

The increase in ampliﬁer power help reduce ”clipping“ which yields a ”cracking“ type of sound which can damage

nearly any speaker over time. The tonal accuracy of the system is also often improved because the ampliﬁers

are no longer strained at high listening levels.

MECHANICAL AND ELECTRICAL INSTALLATION

MOUNTING COMPONENT SPEAKERS

The prime objectives of component speaker mounting are:

• Positioning the speakers correctly.

• Mounting them to a solid surface

• Making sure there are no air leaks between the front and back of the woofers cone

• Protecting the speakers

• Ensuring the wiring is correct

The lower the frequencies a speaker reproduces, the more solid it´s mounting surface must be.

This is necessary because a vibrating panel winds up acting like another loudspeaker and introduces its own

sound into the car. This secondary sound can severely degrade the sound of the music yielding a ”muﬄed“ or

”howling“ sound at certain listening levels. A good air seal isolating the sound from the back of the speaker from

the front wave sound is critical. Lack of a good air seal reduces the bass response and often creates a ”hollow“

sound from the woofer .

The tweeter´s mounting is not nearly so critical since it does not require a rear air seal and it vibrates very little.

Speaker wiring must be isolated from the electrical system of the car and routed away from any factory systems

to avoid potential noise pickup. Use braided wire with 2.5 to 4 mm

2 cable cross section.

Produkt Specifikationer

Mærke:	Blaupunkt
Kategori:	Bilhøjttaler
Model:	VX 170 2 VELOCITY

Har du brug for hjælp?

Hvis du har brug for hjælp til Blaupunkt VX 170 2 VELOCITY stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Bilhøjttaler Blaupunkt Manualer

Blaupunkt GTW 11204 D Manual

27 Juli 2025

Blaupunkt ODx 693 DE Manual

5 Juli 2024

Blaupunkt GTb 1200 Manual

12 Maj 2024

Blaupunkt GTx 462 HP Manual

20 April 2024

Blaupunkt GTx 352 MK-II Manual

29 Marts 2024

Blaupunkt ICx 663 Manual

4 Marts 2024

Blaupunkt GTc 542 Mk II Manual

30 Januar 2024

Blaupunkt Mercedes Benz MPW 1801 Manual

14 Januar 2024

Blaupunkt Velocity Power MPS 1662 C38 Manual

29 December 2023

Blaupunkt GTx 572 hp Manual

24 December 2023

Bilhøjttaler Manualer

Nyeste Bilhøjttaler Manualer

Hertz SPL Show ST 25A NEO Manual

12 August 2025

Sony XS-N1640 Manual

9 August 2025

Sony XS-N1620C Manual

9 August 2025

Pioneer TS-165P Manual

5 August 2025

AudioControl Epic Pro EPICPRO6X Manual

30 Juli 2025

AudioControl Epic Pro EPICPRO8X Manual

29 Juli 2025

AudioControl Epic Pro EPICPRO6S Manual

29 Juli 2025

JL Audio Stealthbox SB-GM-SLVD/10TW1/BK Manual

29 Juli 2025

JBL Grand Touring GTO638 Manual

24 Juli 2025

JBL Power P6562 Manual

23 Juli 2025