Bluetrek g2 Manual

Bluetrek Sund g2

Læs gratis den danske manual til Bluetrek g2 (3 sider) i kategorien Sund. Denne vejledning er vurderet som hjælpsom af 28 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 14.5 anmeldelser. Har du et spørgsmål om Bluetrek g2, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/3

PAGE 1 / 6

BLUETREK G2 user guide

Thank you for choosing the BLUETREK® G2, we hope you will enjoy the convenience

we are bringing to you. The BLUETREK® G2 offers many functions, please read this

manual before getting started.

EC-Declaration of Conformity

We, Innovi Technologies Ltd of

31/F China Online Centre,

333 Lockhart Road,

Wan Chai, Hong Kong

declare under our sole responsibility that our product

BLUETREK G2

to which this declaration refers is in conformity with the appropriate standards

EN300 328-02

EN301 489-17

EN301 489-01

EN50371

EN60950

Following the provisions of Radio and Telecommunications Terminal Equipment

directive 1999/5/EC.

November 2005

Guillaume Ponticelli, Director of Development

FCC Statement

This device complies with Part 15 of the FCC rules. Operation is subject to the following

two conditions: (1) This device may not cause harmful interference. (2) This device must

accept any interference received, including interference that may cause undesired

operation.

Caution: Changes or modifications to this Bluetooth® headset not expressly approved

by the party responsible for compliance could void the user’s authority to operate it.

Industry Canada notice to users and product statements

To prevent radio interference with the licensed service, this device is intended for

operated indoors and away from windows to provide maximum shielding. Equipment (or

its transmit antenna) that is installed outdoors is subject to licensing.

In compliance with Industry Canada regulations, technical specifications have been

provided in a declaration of conformity. This does not imply that Industry Canada

approved the equipment.

Bluetooth® is a trademark owned by Bluetooth SIG, Inc. and is used by the manufacturer under license.

PAGE 2 / 6

BEFORE USING YOUR HEADSET FOR THE FIRST TIME

- You must charge it continuously for about 8 hours, until the red indicator light

turns off. Please refer to the “Charging the BLUETREK® G2” section of this

manual.

- Pair the headset with a mobile phone. Please refer to the “Pairing BLUETREK®

G2” section of this manual.

Introduction

The BLUETREK® G2 headset is a wireless headset based on the Bluetooth®

technology. It complies with Bluetooth® 1.2 protocol, supporting Headset and Hands-

free profile.

The BLUETREK® G2 headset has 3 buttons:

• “TALK “button (main button),

• 1 “VOL+ “button,

• 1 “VOL- “button.

Talk button

Indicator light

VOL + button

Charging

socket

Microphone

VOL - button

Speaker

PAGE 3 / 6

Charging the BLUETREK® G2

Please connect the charger to the headset and to the mains. During the charge, the

indicator light is red. The indicator light will turn off when the charge is complete. During

subsequent charges, the charging should take approximately 2 hour 40 minutes.

When you hear a light beep in your headset at regular intervals, and the indicator light

flashes in red, your headset needs to be recharged.

Important:

• The headset cannot be operated while charging. To maximize battery capacity, it

is recommended to recharge your headset to full capacity only when the battery

is low, since a battery has a lifetime of about 500 charging cycles.

• If you leave your headset battery empty for an extended period of time, it could

excessively discharge the battery. In this case, charge your headset for 10 hours

or more until the battery recovers and recharges completely. Only switch on the

headset once the red indicator light turns off, indicating the battery has fully

recovered.

• Do not let the battery charger remain plugged in the headset for more than 24h.

• The use of any other charger will automatically suspend the warranty.

Pairing the BLUETREK® G2

Before using the BLUETREK® G2 headset, you must pair it with your Bluetooth® mobile

phone. Pairing is the process of linking 2 Bluetooth® devices, so that they can

communicate.

To initiate pairing:

1. Place the BLUETREK® G2 and your mobile phone within 0.3 meter (1 foot) from

each other.

2. Switch on your phone and select its Bluetooth® discover mode (refer to the

Bluetooth® mobile phone user manual).

3. When the BLUETREK® G2 is switched off, press and hold the TALK button for

about 7 seconds until the indicator light flashes red and blue alternatively. And a

sound can be heard in the speaker.

4. Once the mobile phone detects the headset, a “BlueTrek G2” message will be

displayed. Follow the phone instructions to accept the pairing. The PIN code (or

passkey) is 0000, then press “yes” or “ok”.

If pairing success, the indicator light will switch to blue and flashes slowly.

If you haven’t started the discovery mode within 5 minutes, the headset will switch off.

You must then switch on your headset and start the pairing again.

PAGE 4 / 6

Wearing the BLUETREK® G2

The headset can be used on both ears. Rotate the ear clamp if you want to use it on the

other ear. The ear clamp is made of soft material which can be easily shaped to fit your

ear. Make sure the speaker is properly inserted into your ear.

Switching the BLUETREK® G2 ON and OFF

Switching BLUETREK® G2 ON

When your headset is off, press and hold the TALK button for about 2 seconds until the

blue indicator light is on. A beep (2 tones) can be heard in the speaker. Release the

TALK Button.

To check if your headset is ON, press once on the TALK button. If the indicator light

flashes blue, it means your headset is ON.

Switching BLUETREK® G2 OFF

When your headset is on, press and hold the TALK button for about 5 seconds until the

red indicator light is on after the quick blue flashes. A beep (2 tones) can be heard in the

speaker then release the TALK Button.

Making a call

*Mobile phone with voice recognition

. Make sure the voice recognition function on your mobile is activated and your voice

tags have been recorded with the phone. To enter these, please refer to your phone’s

manual

. When there is no incoming or active call, press once on the TALK button

. Wait for the audio signal sent by the mobile phone (generally a short tone).

. Speak the name of person you wish to call.

Mobile without voice recognition

. Make sure both the headset and the mobile phone are ON and in stand-by mode.

. Dial the number on the phone keypad, after approximately 2 seconds the audio

connection will be established.

*This function may not be available on some phones, please refer to the trouble

shooting frequent asked questions in our website: www.bluetrek.com. to find out more.

Answering a call

When the headset rings, press once on the TALK button to take the call.

Ending a call

Press once on the TALK button to end an active call.

Produkt Specifikationer

Mærke:	Bluetrek
Kategori:	Sund
Model:	g2
Vægt:	12 g
Produkttype:	Headset
Batteriteknologi:	Lithium polymer (LiPo)
Dimensioner (BxDxH):	67.5 x 10 x 19.5 mm
Bluetooth-version:	1.2
Forbindelsesteknologi:	Trådløs
Taletid:	13 t
Standby tid:	400 t
Headset type:	Binaural
Genopladeligt batteri:	Ja
Trådløs rækkevidde:	10 m
Kapabilitet:	Telefon