Bluetti Elite 100 V2 Manual


Læs gratis den danske manual til Bluetti Elite 100 V2 (56 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 3 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 2 anmeldelser. Har du et spørgsmål om Bluetti Elite 100 V2, eller vil du spørge andre brugere om produktet?

Side 1/56
Elite 100 V2
Portable Power Station
User Manual V1.1
Important Instructions
For optimal performance, update your unit to the latest
firmware before first use.
See the appendix "Update Firmware via BLUETTI App"
for guidance.
Read and understand this manual before use and keep
it handy for future reference.
Tips
1. Fully charge the unit before first use.
2. Do not use solar panels with open circuit voltage higher than 60V. Solar input
voltage range for the unit is 12V-60V.
3. If the unit's SoC falls below 5%, please recharge the unit in time. If the SoC drops to 0,
power off the unit and charge it for at least 30 minutes before restarting.
4. Do not connect the unit's AC output to the grid.
5. If not used for more than 3 months, charge the unit to 40%-60% SoC and store it
with the power off.
6. For optimum battery life, discharge and charge the unit every 3 months.


Produkt Specifikationer

Mærke: Bluetti
Kategori: Ikke kategoriseret
Model: Elite 100 V2

Har du brug for hjælp?

Hvis du har brug for hjælp til Bluetti Elite 100 V2 stil et spørgsmål nedenfor, og andre brugere vil svare dig