Bobrick QuietDry B-7120 Manual

Bobrick Håndstoffer QuietDry B-7120

Læs gratis den danske manual til Bobrick QuietDry B-7120 (16 sider) i kategorien Håndstoffer. Denne vejledning er vurderet som hjælpsom af 24 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 12.5 anmeldelser. Har du et spørgsmål om Bobrick QuietDry B-7120, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/16

INSTALLATION INSTRUCTIONS

QuietDry™ Series, TrimDry™

SURFACE-MOUNTED ADA DRYER

B-7120 White Painted Steel or B-7128 Stainless Steel

Installation Instructions Surface-Mounted Hand Dryer Pages 2 & 3 ...............................................

Instrucciones De Instalación Secadores De Manos Bobrick

Montados Sobre La Pared Tipo Pages 4 & 5 ......................................................................................

Einbauanleitung Bobrick -Hände

Für Aufputzmontage Pages 6 & 7 ......................................................................................................

Notice D’Installation Sèche-Mains Bobrick

Montés En Surface Pages 8 & 9 ..........................................................................................................

Istruzioni Per L’installazione Asciugamani Bobrick Pages 10 & 11 ................................................

表面安装式自动感应干手机/干发机安装说明书 ................................................Pages 12 & 13

Warranties Pages 14 & 15 ...................................................................................................................

WARNING: TURN ELECTRICAL POWER SUPPLY OFF BEFORE

MAKING ELECTRICAL CONNECTIONS.

DRYER MUST BE GROUNDED (EARTHED).

x 4

Ø 5/16" 8mm

1. 2. 3.

Ø7/8" 22mm

Hole for between wall wiring

Flange cutout for

surface mounting

9-1/4" 235mm

7-3/4" 197mm

13-25/32" 350mm

13-19/32" 345mm

Ø7/8" 22mm

Hole for between wall wiring

Electrical Characteristics

Recommended Mounting Heights

Removal of Cover

Installation of Mounting Base

IMPORTANT SAFETY INSTRUCTIONS

* READ AND FOLLOW ALL INSTRUCTIONS

** Electric warm air hand dryer ntended for use in a household environment i

by non-expert users. Not suitable for outdoor use.

*** This appliance can be used by children aged from 8 years and above and

persons with reduced physical, sensory or mental capabilities or lack of

experience and knowledge if they have been given supervision or

instruction concerning use of the appliance in a safe way and understand

the hazards involved. Children shall not play with the appliance. Cleaning

and user maintenance shall not be made by children without supervision.

**** If a fault develops disconnect the electrical supply, a qualiﬁed

electrician should be called.

***** SAVE THESE INSTRUCTIONS

Distance from ﬂoor to bottom mounting screw holes of mounting base.

Children's Washrooms, ages 3-4 .............................................................................................................................................................. 36'' (915mm)

Children's Washrooms, ages 5-8 .............................................................................................................................................................. 40'' (1015mm)

Children's Washrooms, ages 9-12 ............................................................................................................................................................ 44'' (1120mm)

Universal Design ......................................................................................................................................................................................48'' (1219mm)

1. Start installation of dryer by

removing cover. Remove two

screws, from the bottom of the

dryer.

1. Hold the Installation Template against the wall in the desired location of

the installed dryer. See recommended mounting heights above.

2. Make sure line on template representing bottom of dryer mounting base

is horizontal and located at the desired height above ﬂoor.

3. Mark center of four mounting screw holes and hole for entry of electrical

wiring if electrical supply is concealed in wall and will enter dryer from

back through mounting base.

NOTE: Surface-mounted electrical supply entry is located in the lower right

corner of the mounting base. Surface-mounted supply cable should be ﬁtted

in a conduit.

4. For brick, stone, and concrete walls drill four 0.315" (8mm) holes to suit

wall plugs 0.315" (8mm) x 1-1/4" (45mm) and screws#10 (4.8mm) x 2"

(50mm) long (provided). See template for wall plug and screw

installation details.

5. For plaster or dry wall construction, provide concealed backing to

comply with local building codes and secure with four #10 (M4.8) round-

head sheet-metal screws, or 3/16'' (5mm) toggle bolts (not furnished).

6. Fasten mounting base securely to wall.

* Bobrick automatic hand dryers should be installed at least 15" (380mm) above any projection or horizontal surface which may interfere with the

operation of the automatic sensor.

Model B-7120 White Painted Steel Cover B-7128 Stainless Steel Cover, and 115V AC, 15 Amp, 1725 Watts, 50/60 Hz, Single Phase, cULus listed.

Model B-7120 White Painted Steel Cover B-7128 Stainless Steel Cover, and 208–240V AC, 6.8-7.8 Amp, 1400-1900 Watts, 50/60 Hz, Single

Phase; cULus listed, VDE and CE marked.

Installation instructions and template provide information that will assist in the installation of the Bobrick B-7120 and B-7128 115V, B-7120 and B-7128

208-240V. Retain Installation Instruction Sheet for important maintenance instructions and warranty information.

2. Rotate bottom of cover away

from mounting base and then lift

up.

FOR PROPER ELECTRICAL CONNECTIONS, CHECK LOCAL

BUILDING CODE. UNIT MUST BE INSTALLED BY A QUALIFIED

LICENSED ELECTRICIAN