Bogen CA10A Manual

Bogen Ikke kategoriseret CA10A

Læs gratis den danske manual til Bogen CA10A (1 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 2 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 1.5 anmeldelser. Har du et spørgsmål om Bogen CA10A, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/1

CA10A Call Switch

Model CA 0A is a 2-position room switch designed for use1

with SBA-Series room selector panels. When the switch is

pressed, the annunciator lamp on the SBA-Series switchbank

illuminates, designating the calling station. When the switch is

released, the lamp remains illuminated until the call is

answered.

The switch is designed for flush mounting in a standard single-

gang outlet box. Refer to Figure 1below and wire the switch

as follows:

1. Connect the unshielded wire from the corresponding

annunciator terminal on the room selector panel to the red

wire of the CA 0A switch.1

2. Connect the black wire to the speaker ground (shield of

speaker line).

CA11A Call Switch

Model CA A is a 3-position switch providing annunciator call11

and privacy control. The switch has two fixed positions,TALK

and PRIVACY. In the TALK position, the remote station has

normal, non-private operation. In the PRIVACY position, the

remote station cannot be monitored from the main console.

The CA A also has a momentary PRESS TO CALL position.11

When the switch is pressed, the annunciator lamp on the SBA-

Series room selector panel illuminates, designating the calling

station. When the switch is released, the lamp remains illumi-

nated until the call is answered.

The switch is designed for flush mounting in a standard single-

gang outlet box. Refer to Figure 2 below and wire the switch

as follows:

1. Connect the unshielded wire from the corresponding

annunciator terminal on the room selector panel to the red

wire of the CA A switch.11

2. Connect the white wire to the center tap of the room

speaker line-matching transformer. This connection may be

made via the speaker cable shield, as shown in Figure 2.

3. Connect the black wire to the audio system ground at the

shield of the audio cable from the console, as shown in

Figure 2.

CALL SWITCHES Models CA10A & CA11A

Figure 1- Model CA10A Connecting Diagram

Figure 2 - Model CA A Connecting Diagram11

www.bogen.com

54-5972-01 C 030722

Specifications subject to change without notice.

Produkt Specifikationer

Mærke:	Bogen
Kategori:	Ikke kategoriseret
Model:	CA10A
Vægt:	- g
Produktfarve:	Hvid
Indbygget skærm:	Ingen
Fjernbetjening korrekt brug:	Kabel
Indgangstype:	Tryk på knapper
Maks. rækkevidde:	- m
Antal understøttede enheder:	2
Genopladelig:	Ingen