Bogen CS1EZ Manual

Bogen Ikke kategoriseret CS1EZ

Læs gratis den danske manual til Bogen CS1EZ (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 12 personer og har en gennemsnitlig bedømmelse på 4.1 stjerner ud af 6.5 anmeldelser. Har du et spørgsmål om Bogen CS1EZ, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Easy DesignTM Speaker

Model CS1EZ

Speaker Layout

The layout of the speakers should be planned before installation

begins. Layout starts in one corner of the room. The first speaker

should be positioned from each wall a distance approximately

equal to the ceiling height of the room.

The next speaker in row 1 should be spaced a distance approxi-

mately equal to twice the height of the ceiling. Each additional

speaker in the row should use this same spacing.

Row 2 starts at twice the ceiling height distance from row 1 and

twice the ceiling height from the wall. The other speakers in this

row are also spaced at twice the ceiling height.

Row 3 is again spaced at twice the ceiling height from the previ-

ous row. The first speaker starting this row is positioned at one

ceiling height distance from the wall (similar to row 1).

Continue this pattern of alternating rows until the room is covered.

The spacing of the speakers can be adjusted so that the speakers

are evenly spaced in a row and aesthetically pleasing.

TB8 Tile Bridge - The TB8 supports the weight of the

speaker and recessed enclosure. This is also the item

to which the speaker mounting screws attach. The TB8

is required for each speaker assembly installed.

TB8

Tile Bridge

RE84

Recessed

Enclosure

RE84 Recessed Enclosure - The RE84 is an optional back

box for ceiling speakers. UL Listed for use where ceiling

plenum is part of an air handling system. The RE84 also

includes attachment tabs allowing the enclosure to be sup-

ported from structures other than the actual ceiling grid.

Additional Hardware

54-5043-01C 1209

Specifications subject to change without notice.

www.bogen.com

Speaker Installation

STEP 1 - Remove the tile from ceiling and center the TB8

tile bridge on the back. Use the tile bridge to trace out, and

then cut an 8-1/2” square hole.

NOTE: It is sometimes more efficient to stack up

a number of ceiling tiles and then cut the speaker

opening in a number of them at once.

STEP 2 - If using the optional RE84 Recessed Enclosure,

bend up the 4 horseshoe tabs (see figure 1 on the TB8).

Position the TB8 over the hole in the tile and push down

the locator tabs (see figure 2).

STEP 3 - Using the 4 supplied screws, attach the CS1EZ

to the TB8 using the 4 clips in the corners of the opening

on the TB8 as nuts.

NOTE: Only tighten the screws until the grille is

snug against the tile. Over tightening will cause

the screws to dimple the grille.

STEP 4a - If not using RE84 Recessed Enclosure:

Make the electrical connections using the 2 screw terminals

on the CS1EZ. The suggested amplifier connections are:

70V terminal - 70V HOT

COM terminal - 70V COMMON

NOTE: The speaker will also work perfectly well

with these connections reversed. However, it is

important to be consistent in the wiring of the

speakers in the system. If adjacent speakers have

reversed wiring connections, they will tend to

cancel each otherʼs bass response, diminishing

the sound quality.

STEP 4b - If using RE84 Recessed Enclosure:

Install an entry fitting to a knock-out in the RE84 to accom-

modate the plenum cable. Feed cable through RE84 entry

and clamp. Make speaker connections as in 4a. All connec-

tions and any splices must be made within the enclosure.

Place the RE84 over the horseshoe tabs (see step 2) and

twist the tabs with pliers to secure the RE84 to the TB8.

STEP 5 - Place the assembled ceiling tile back into the

ceiling.

Figure 1

Figure 2

The CS1EZ is warranted to be free from defects in material or workmanship for three (3) years from the

date of sale to the original purchaser. Any part of the product covered by this warranty that, with normal

installation and use, becomes defective will be repaired or replaced by Bogen, at our option, provided the

product is shipped insured and prepaid to: Bogen Factory Service Department, 50 Spring Street, Ramsey,

NJ 07446, USA. The product(s) will be returned to you freight prepaid. This warranty does not extend to

any of our products that have been subjected to abuse, misuse, improper storage, neglect, accident,

improper installation or have been modified or repaired or altered in any manner whatsoever, or where the

serial number or date code has been removed or defaced.

THE FOREGOING LIMITED WARRANTY IS BOGEN'S SOLE AND EXCLUSIVE WARRANTY AND THE

PURCHASER'S SOLE AND EXCLUSIVE REMEDY. BOGEN MAKES NO OTHER WARRANTIES OF

ANY KIND, EITHER EXPRESS OR IMPLIED, AND ALL IMPLIED WARRANTIES OF

MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY DISCLAIMED AND

EXCLUDED TO THE MAXIMUM EXTENT ALLOWABLE BY LAW. Bogen's liability arising out of the

manufacture, sale or supplying of products or their use or disposition, whether based upon warranty,

contract, tort or otherwise, shall be limited to the price of the product. IN NO EVENT SHALL BOGEN BE

LIABLE FOR SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT

LIMITED TO, LOSS OF PROFITS, LOSS OF DATA OR LOSS OF USE DAMAGES) ARISING OUT OF THE

MANUFACTURE, SALE OR SUPPLYING OF PRODUCTS, EVEN IF BOGEN HAS BEEN ADVISED OF

THE POSSIBILITY OF SUCH DAMAGES OR LOSSES. Some States do not allow the exclusion or limita-

tion of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This

warranty gives you specific legal rights, and you may also have other rights which vary from State to State.

Products that are out of warranty will also be repaired by the Bogen Factory Service Department -- same

address as above or call 201-934-8500. The parts and labor involved in these repairs are warranted for

90 days when repaired by the Bogen Factory Service Department. All shipping charges in addition to parts

and labor charges will be at the owner's expense. All returns require a Return Authorization number.

7/22/2008

Limited Warranty; Exclusion of Certain Damages

Produkt Specifikationer

Mærke:	Bogen
Kategori:	Ikke kategoriseret
Model:	CS1EZ
Vægt:	1360 g
Produktfarve:	Hvid
Wi-Fi:	Ingen
Bluetooth:	Ingen
Udgangseffekt (RMS):	1 W
Equalizer:	Ingen
Husmateriale:	Stål
Anbefalet brug:	Universel
Frekvensområde:	50 - 12000 Hz
Impedens:	4900 ohm (Ω)
Forbindelsesteknologi:	Ledningsført
Lyd-output kanaler:	1.0 kanaler
Højttaler, placering:	Kan monteres i loftet
Strømkilde type:	Vekselstrøm
Effektkrav:	70V
Antal drivere:	1
Sensitivitet:	95 dB
Antal produkter inkluderet:	1 stk
Forstærker:	Indbygget
Højttaler kabinet:	Lukket
Dybde (efter britisk standard):	3.25 "
Højde (efter britisk standard):	13 "
Bredde (efter britisk standard):	13 "