Bogen HS7EZ Manual

Bogen Ikke kategoriseret HS7EZ

Læs gratis den danske manual til Bogen HS7EZ (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 16 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 8.5 anmeldelser. Har du et spørgsmål om Bogen HS7EZ, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Easy Design

Speaker

Model HS7EZ

Speaker Layout

The layout of the speakers should be planned

prior to installation. Desired mounting height,

barring obstructions, is 15 to 20 feet, with the

speakers angled downward toward the listening

area and facing in the same direction.

Layout starts in one corner of the area. The first

speaker in Row 1 should be positioned a dis-

tance equivalent to (A) (see Figure 2)from the

corner based on the noise level of the area. The

next speaker in Row 1 should be a distance

equivalent to (B) (see Figure 2)from the first

speaker. Each additional speaker in the row

should use this same spacing.

Row 2 starts a distance equivalent to (C) (see

Figure 2)from Row 1 and, like Row 1, each

speaker should be a distance apart equivalent

to (B).

Row 3 starts a distance equivalent to (C) from

Row 2. Continue this pattern of alternating rows

until the area is appropriately covered.

For areas that include high shelving or corri-

dors, speakers should be installed so that they

project down the aisles between the shelves or

down through the corridors.

The spacing of the speakers can be adjusted so

that the speakers are evenly spaced in a row.

NOTE: Each environment is unique. This layout

plan is general in nature and may not be

applicable for every installatio

Figure 1

START

HORN SPEAKER

Row 1

Row 2

Row 3

Row 4

60 ft. 120 ft. 80 ft. 1/2 Rotation

Figure 2

Specifications subject to change without notice.

Part No. 54-5071-01B 0809

Low Noise

(55dB-65dB)

Medium Noise

(65dB-75dB

50 ft. 100 ft. 60 ft. Full Clockwise

A B C Volume Setting

PLACEMENT

www.bogen.com

Speaker Installation

STEP 1 -For easier installation, remove the flange

(base) from the speaker by unscrewing the wing nut.

Place the flange flush with the mounting surface and

mark the pivot area using either a marker or chisel. Drill

the appropriately sized hole and screw the flange to the

surface. Place another screw in the front of the flange for

swivel control purposes (see Figure 3). (Use appropriate

hardware for your specific mounting surface.)

STEP 2 -After mounting the flange, reattach the speaker

to the flange and aim the speaker for the desired cover-

age. A 45-degree downward angle is recommended,

but this may vary depending upon speaker layout.

STEP 3 -Make the electrical connection using the two

wires connected to the speaker. The suggested amplifier

connections are:

Amplifier Outputs Speaker Connections

70V Red Wire

COM Black Wire

NOTE: The speaker will also work perfectly well with

these connections reversed. However, it is

important to be consistent in the wiring of the

speakers in the system.

STEP 4 -Adjust the volume control located on the horn

to the desired setting. See Figure 2 for the suggested

initial settings based on the ambient noise level of the

environment.

Figure 3

Figure 4

VOLUME CONTROL

WIRE CONNECTORS

The HS7EZ is warranted to be free from defects in material or workmanship from the date of sale to the original purchaser for the lifetime of the prod-

uct. Any part of the product covered by this warranty that, with normal installation and use, becomes defective will be repaired or replaced by Bogen,

at our option, provided the product is shipped insured and prepaid to: Bogen Factory Service Department, 50 Spring Street, Ramsey, NJ 07446, USA.

The product will be returned to you freight prepaid. This warranty does not extend to any of our products that have been subjected to abuse, misuse,

improper storage, neglect, accident, improper installation or have been modified or repaired or altered in any manner whatsoever, or where the serial

number or date code has been removed or defaced.

THE FOREGOING LIMITED WARRANTY IS BOGEN'S SOLE AND EXCLUSIVE WARRANTY AND THE PURCHASER'S SOLE AND EXCLUSIVE

REMEDY. BOGEN MAKES NO OTHER WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED, AND ALL IMPLIED WARRANTIES OF

MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY DISCLAIMED AND EXCLUDED TO THE MAXIMUM EXTENT

ALLOWABLE BY LAW. Bogen's liability arising out of the manufacture, sale or supplying of products or their use or disposition, whether based upon

warranty, contract, tort or otherwise, shall be limited to the price of the product. IN NO EVENT SHALL BOGEN BE LIABLE FOR SPECIAL, INCIDEN-

TAL OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, LOSS OF PROFITS, LOSS OF DATA OR LOSS OF USE DAMAGES)

ARISING OUT OF THE MANUFACTURE, SALE OR SUPPLYING OF PRODUCTS, EVEN IF BOGEN HAS BEEN ADVISED OF THE POSSIBILITY OF

SUCH DAMAGES OR LOSSES. Some States do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation

or exclusion may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from State to State.

Products that are out of warranty will also be repaired by the Bogen Factory Service Department -- same address as above or call 201-934-8500. The

parts and labor involved in these repairs are warranted for 90 days when repaired by the Bogen Factory Service Department. All shipping charges in

addition to parts and labor charges will be at the owner's expense. All returns require a Return Authorization number.

7/22/2008

Limited Warranty; Exclusion of Certain Damages

Produkt Specifikationer

Mærke:	Bogen
Kategori:	Ikke kategoriseret
Model:	HS7EZ
Vægt:	907 g
Wi-Fi:	Ingen
Bluetooth:	Ingen
Udgangseffekt (RMS):	7.5 W
Equalizer:	Ingen
Husmateriale:	Metal
Anbefalet brug:	Universel
Frekvensområde:	250 - 14000 Hz
Impedens:	653 ohm (Ω)
Forbindelsesteknologi:	Ledningsført
Lyd-output kanaler:	1.0 kanaler
Højttaler, placering:	Tabletop/bookshelf, Wall-mountable
Strømkilde type:	Vekselstrøm
Effektkrav:	70V
Antal drivere:	1
Sensitivitet:	105 dB
Antal produkter inkluderet:	1 stk
Dybde (efter britisk standard):	4 "
Højde (efter britisk standard):	6 "
Bredde (efter britisk standard):	6 "