Bogen Nyquist NQ-E7020 Manual

Bogen Ikke kategoriseret Nyquist NQ-E7020

Læs gratis den danske manual til Bogen Nyquist NQ-E7020 (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 69 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 35 anmeldelser. Har du et spørgsmål om Bogen Nyquist NQ-E7020, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

NQ-E7020 Digital Call Switch

Application Manual

The NQ-E7020 is a single gang-box style wall mounted

push-button switch that allows users to initiate a normal,

urgent, or emergency call from staff locations via an

associated Nyquist intercom speaker.

The switch uses a capacitive touch button interface. A color

LED ring is used to conrm user actions and to indicate

status (for example, changing color and/or state from

solid color to blinking) or to acknowledge a button press when a user

initiates a call or when a call has been terminated. The LED status ring

is also used to indicate when Nyquist system’s call queue containing

the station’s call request is cleared or if the station’s call request is

individually cleared by the administrative station without responding.

Installation

The NQ-E7020 mounts into a standard single gang outlet box and is outtted with a standard deco-

ra plate (color based on the switch’s specic application and/or customer need).The back has four

screw-terminal connections (GND, CL, CH, 5V). These get connected to the matching terminals on

the CAN Bus source/master device using standard CAT5 cabling. Load resistance needs to be set

on the end-of-line DCS. Refer to Figure 1.

Figure 1

Publication Number 740-00075B 1811

CAN_H and CAN_L must be a twisted pair like CAT5 cabling.

CAN wiring can be daisy-chained.

All devices are internally terminated and the last switch on the bus must have the termination switch in the “ON” position.

5V and Signal Ground can be either twisted or not.

Signal Ground

CAN_L

CAN_H

Digital Call Switch Digital Call SwitchApplicable

Appliance

Recommended CAT5

Cable Lengths

CAT5 cable lengths and the number of

CAT5 wire pairs determine the number

of digital call switches that can be dai-

sy-chained. (See Figure 2.)

Length limits are due to voltage drop

across the power conductors. For 2-pair

or 3-pair, it is best to tie the solids togeth-

er and to tie the stripes together at each

end of a long run. This will make it easier

to keep up with which wires are V+ and V-.

CAUTION:

These calculations are based on standard 24 AWG solid copper wire. Calculations will not be

accurate for copper-plated aluminum wire or wire guage less than 24 AWG.

Conguring

NOTE: Refer to the System Administrator Manual for detailed instructions on how to congure

the DCS. DCS conguration is part of setting System Parameters and Class of Service parame-

ters.

1200 MacArthur Blvd. Suite 304, Mahwah, NJ 07430 • 1-800-999-2809

Figure 2

Produkt Specifikationer

Mærke:	Bogen
Kategori:	Ikke kategoriseret
Model:	Nyquist NQ-E7020

Har du brug for hjælp?

Hvis du har brug for hjælp til Bogen Nyquist NQ-E7020 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Bogen Manualer

Bogen CSD1X2U-V2 Manual

17 Juli 2025

10 Juli 2025

6 Juli 2025

6 Juli 2025

5 Juli 2025

17 Juni 2025

17 Juni 2025

17 Juni 2025

Bogen Nyquist NQ-ZPMS Manual

8 Juni 2025

Bogen Nyquist NQ-S1810WBC Manual

8 Juni 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Tripp Lite NGI-S04C2 Manual

31 Juli 2025

Advantech RSB-3720 Manual

31 Juli 2025

Tripp Lite Protect It! TLM606 Manual

31 Juli 2025

Advantech AIMC-2000 Manual

31 Juli 2025

Oppo Find N Manual

31 Juli 2025

Cybex Platinum YEMA.tie Manual

31 Juli 2025

Infiniton CC3FB Manual

31 Juli 2025

Intellinet 712996 Manual

31 Juli 2025

Tripp Lite TLM812GF Manual

31 Juli 2025

Asko W5096RW Manual

31 Juli 2025