Bogen Nyquist NQ-SMS1810-VF Manual

Bogen Ikke kategoriseret Nyquist NQ-SMS1810-VF

Læs gratis den danske manual til Bogen Nyquist NQ-SMS1810-VF (1 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 8 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 4.5 anmeldelser. Har du et spørgsmål om Bogen Nyquist NQ-SMS1810-VF, eller vil du spørge andre brugere om produktet?

Side 1/1
Specications are subject to change.
© Copyright 2023, Bogen Communications LLC
740-00192B 230720
NQ-SMS1810-VF Speaker
Installation Instructions
Preparation
1. Upward-ring Operation Figure 1: Use as shipped. ( )
2. Downward-ring Operation: Relocate hangers to the bottom of the assem-
bly. (Figure 2)
3. Side-ring Operation: Relocate one hanger to the bottom of the assembly.
(Figure 3)
Figure1: 
Upward-ring operation
Figure2: 
Downward-ring operation
Figure3: 
Side-ring operation
Installation
1. Determine a structurally sound hang point for the enclosure.
2. Install to the desired height using the hanging chain.
Note: AHJ/local codes may require a secondary tie-off to the structure.
Electrical connection
1. Feed the supply cable through whip (if required) to connector.
2. Select speaker leads for desired system type: 70V – Red, 25V – Yellow,
and COMBlack. Interconnect the speakers in the system, making sure
that all leads of the same color are connected. Avoid swapping colors.
3. Cut bare wire tip off of unused speaker lead. Feed connection points
through the clamp into the enclosure and tighten the clamp screws.
4. Rotate the switch to the desired power setting.
Product has been tested to UL Standard 2043.


Produkt Specifikationer

Mærke: Bogen
Kategori: Ikke kategoriseret
Model: Nyquist NQ-SMS1810-VF

Har du brug for hjælp?

Hvis du har brug for hjælp til Bogen Nyquist NQ-SMS1810-VF stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Bogen Manualer

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer