Bogen TBL1S Manual


Læs gratis den danske manual til Bogen TBL1S (3 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 62 personer og har en gennemsnitlig bedømmelse på 3.5 stjerner ud af 31.5 anmeldelser. Har du et spørgsmål om Bogen TBL1S, eller vil du spørge andre brugere om produktet?

Side 1/3
TBL S1
Transformer Balanced
Line Input Module
Features
Transformer-isolated line level input
Gain/Trim control
Bass and treble
Audio Gating
Gating with threshold and duration adjustments
• Variable signal ducking when muted
Fade back from mute
4 levels of available priority
Can be muted from higher priority modules
Can mute lower priority modules
Pluggable screw terminal strip
Printed in Taiwan.
© 2007 Bogen Communications, Inc.
54-2084-01D 0704
Specifications subject to change without notice.
Gain
Provides control over the level of input signal that can be applied to the
internal signal buses of the main unit. Allows a way to balance the input
levels of various devices so that the main unit controls can be set to
relatively uniform or optimum levels.
Gate - Threshold (Thresh)
Controls the amount of input signal level necessary to turn the module’s
signal output on and mute lower priority modules. Clockwise rotation
increases the necessary input signal level required to produce audio output
and mute lower priority modules.
Ducking (Duck)
Controls the module’s output level when the module is muted or gated.
The range is adjustable from no reduction in level to full muting of the out-
put signal.
Module Installation
1. Turn off all power to the unit.
2. Make all necessary jumper selections.
3. Position module in front of any desired module
bay opening, making sure that the module is
right-side up.
4. Slide module on to card guide rails. Make sure
that both the top and bottom guides are
engaged.
5. Push the module in to the bay until the faceplate
contacts the unit’s chassis.
6. Use the two screws included to secure the mod-
ule to the unit.
WARNING:
Turn off power to unit and make all jumper
selections before installing module in unit.
Jumper Se
Priority Level*
This module can
priority. Priority 1
modules with low
Priority 2 can be
can mute module
Priority 3 can be
modules and can
4 modules are m
ules. Remove all j
*The number of pr
by the amplifier the
Gating
Gating (turning o
insufficient audio
disabled. Detectio
muting lower pr
regardless of this
Bus Assignmen
This module can
mono signal can
B bus, or both bu


Produkt Specifikationer

Mærke: Bogen
Kategori: Ikke kategoriseret
Model: TBL1S

Har du brug for hjælp?

Hvis du har brug for hjælp til Bogen TBL1S stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Bogen Manualer

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer