With each wash cycle.
Compartment
For pro gramm es with pre-wash only.
(Follow the user instructions !)
Electric indicator on control panel (if provided).
Check the rinse aid level
(On models w ith wa ter s oftener system only.)
Electric indicator on control panel (if provided).
If there is no salt warning light in the control panel
(for some models), you can e stimate when to f il l the salt into
the softener by the number of cycles the dishwasher has run.
Check the regeneration
salt le vel
Load the baskets
Select a p rogramme
Turn on the water tap and press the . The machine will s tart workin g
after about 10 seconds.
Sta rt/Pause Button
Running the dishwasher
Swi tch off t he applia nce
Fill the detergent dispenser
Changing the programme
Add forgotten dishes in the
dishwasher.
Scrape off any large amount of leftover food. Soften remnants of burnt foo d in pa ns,
then l oad the baskets. Refer to the dishwashe r loading instructions.
Close the door,Press the Programme Bu tton un til the selected programme lights up.
( See the section entitled Operating instructi on )“ ”
When the working cy cle has finished, the buzzer of the
dishwasher will sound 8 times, then stop.
Turn off the appliance using the On/Off Button.
If the appliance is switched
off during a wash cycle.
Op en t he do or carefull y.
Hot st eam may escape
when the door is opened!
If the appliance is switched off during a wash cycle, when switched
on agai n, plea se re-select th e washing cycle and operate the dishwasher
according to the original Power-on state ).
Switch on the appliance Pre s s the On/Off button to switch on the applian c e, Open the door.
For detailed operating method read the corresponding content on the instructio n manual.
1. A ru nning cycle can only be modified if it has been running for a short time. O therwise the deterg ent
m ay have alre ady be en released and the water already drained. If this is the case, the de tergent
dispenser must be refil led.
2. Press the Start/Pause button, the machine will pause, press the program button more than 3 seconds
the n you can change the program to the desired cycle setting.
3. Press the Start/Pause Button, the d ishwasher will run after 10 seconds
Turn off the water tap,
unload the baskets
Warning: wait a few minutes (about 15 min utes) before unloading the dishwa sher to avoid handling
the dishes and utensils while they are still hot and more susceptible to break.
The y will a lso dry better.Unload the ap pliance, starting from the lower b asket.
1 .Press the Start/Pause Butt on to stop the washing.
2 .Open the do or a little .
3 .After the spray arms stop working, you can open the door
c ompletely.
4 .Add forgotten dishe s.
5 .C lose the door
6 .Press the Start/Pau s e Button , the dishwasher will run
a fter 10 secon ds.
