Boss GT-1 Manual

Boss Effektpedalen GT-1

Læs gratis den danske manual til Boss GT-1 (12 sider) i kategorien Effektpedalen. Denne vejledning er vurderet som hjælpsom af 56 personer og har en gennemsnitlig bedømmelse på 3.5 stjerner ud af 28.5 anmeldelser. Har du et spørgsmål om Boss GT-1, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/12

Owner’s Manual (this document)

Read this rst. It explains the basic things you need to know in order to use the GT-1.

PDF Manual (download from the Web)

5Parameter Guide

This explains all parameters of the GT-1.

5Sound List

This is a list of the sounds built into the GT-1.

To obtain the PDF manual

1. Enter the following URL in your computer.

http://www.boss.info/manuals/

2. Choose “GT-1” as the product name.

Owner’s Manual

Getting Ready . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Connecting the Equipment . . . . . . . . . . . . . . . . . . . . . . . . 2

Specify the Type of Amplier You Have Connected . . . . 3

Tuning the Guitar (TUNER) . . . . . . . . . . . . . . . . . . . . . . . . . 3

Playing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Selecting a Patch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Selecting by Patch Number . . . . . . . . . . . . . . . . . . . 4

Choose a Patch Based on a Category

(EASY SELECT) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

About the Play Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Editing: Eects . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Basic Procedure for Eect Editing . . . . . . . . . . . . . . . . . . . 5

Changing the Eect Connection Order . . . . . . . . . 5

Editing from the Play Screen . . . . . . . . . . . . . . . . . . . . . . . 5

EASY EDIT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Saving a Patch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Editing: MENU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Basic MENU Operations . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Assigning Favorite Parameters to [1]–[3] Knobs . 7

Adjusting the Contrast (Brightness) of the

Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Restoring the Factory Default Settings

(Factory Reset) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Connecting to a Computer . . . . . . . . . . . . . . . . . . . . . . . . 8

Installing the USB Driver . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Connecting to a Computer . . . . . . . . . . . . . . . . . . . . . . . . 8

Using the GT-1 as an Audio Interface . . . . . . . . . . . . . . . . 8

Settings for CTL1, EXP1, and an External Pedal . . . . 9

Assigning a Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Adjusting the Expression Pedal

(Pedal Calibration). . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Connecting External Pedals . . . . . . . . . . . . . . . . . . 10

Looper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Loop Playback Level Setting . . . . . . . . . . . . . . . . . . 11

[CTL1] Switch Color. . . . . . . . . . . . . . . . . . . . . . . . . . 11

Error Message List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Main Specications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

USING THE UNIT SAFELY/IMPORTANT NOTES . . . . . . 12

Before using this unit, carefully read “USING THE UNIT SAFELY” and

“IMPORTANT NOTES” (leaet “USING THE UNIT SAFELY” and Owner’s

Manual (p. 12)).After reading, keep the document(s) where it will be

available for immediate reference.

DC IN jack

This jack is for connecting

an AC adaptor (BOSS PSA

series; sold separately).

Use only the specied AC

adaptor (PSA series), and

connect it to an AC outlet

of the correct voltage.

Do not use any other AC

adaptor, since this may cause

malfunction.

Getting Ready

Connecting the Equipment

USB COMPUTER port

Use a USB cable

to connect to a

computer and

exchange audio

data between

the GT-1 and the

computer (p. 8).

AUX IN jack

Use a stereo-mini plug to

connect your audio player.

Use your audio player’s volume

control to control the volume of

OUTPUT jacks and PHONES jack.

OUTPUT jack

Connect these to your guitar amp or

mixer. If using a mono connection,

use only the L/MONO jack.

INPUT jack

Connect your guitar. The INPUT jack doubles as the power

switch. Power to the unit is turned on when you plug into

the INPUT jack; the power is turned o when the cable is

unplugged.

PHONES jack

You can connect a set of

headphones here.

* Before turning the unit on/o, always be sure to turn the volume

down. Even with the volume turned down, you might hear some

sound when switching the unit on/o. However, this is normal and

does not indicate a malfunction.

Installing the Batteries

Install four alkaline batteries (AA, LR6) in the battery compartment located on the bottom of the unit.

* When turning the unit over, be careful so as to protect the buttons and knobs from damage. Also, handle the unit

carefully; do not drop it.

* If you handle batteries improperly, you risk explosion and uid leakage. Make sure that you carefully observe all of the

items related to batteries that are listed in “USING THE UNIT SAFELY” and “IMPORTANT NOTES” (separate sheet “USING THE

UNIT SAFELY” and Owner’s manual (p. 12)).

* We recommend that you keep batteries installed in the unit even though you’ll be powering it with the AC adaptor. That

way, you’ll be able to continue a performance even if the cord of the AC adaptor gets accidentally disconnected from the

unit.

* To prevent malfunctions or accidents, install or replace the batteries before connecting the unit to other equipment.

* “BATTERY LOW” will appear on the display if the batteries are low. Replace them with new ones.

* To prevent malfunction and equipment failure, always turn down the

volume, and turn o all the units before making any connections.

CTL2, 3/EXP2 jacks (Connecting to External Pedals)

You can control various parameters by connecting an expression pedal

(Roland EV-5: sold separately) or a footswitch (FS-5U, FS-6, FS-7: sold

separately).

For details on the settings, refer to “Settings for CTL1, EXP1, and an External

Pedal” (p. 9).

Turn down the volume of the

connected device

Connect your guitar

Connect your equipment to the

OUTPUT jack(s)

Turn on the power of the

amp(s)

Produkt Specifikationer

Mærke:	Boss
Kategori:	Effektpedalen
Model:	GT-1

Har du brug for hjælp?

Hvis du har brug for hjælp til Boss GT-1 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Effektpedalen Boss Manualer

Boss GT-1 Manual

10 Juli 2024

Boss Manualer

7 Juni 2025

1 Juni 2025

25 Februar 2025

23 Januar 2025

12 Januar 2025

11 Januar 2025

Boss KATANA-MINI X Manual

8 Januar 2025

Boss Distortion DS-1X Manual

1 Januar 2025

Boss FV-500H/FV-500L Manual

1 Januar 2025

Boss RC-505MK2 Manual

1 Januar 2025