2
IMPORTANT SAFEGUARDS
When using this or any other electrical product, always follow these basic
safety precautions, especially when children are present.
READ ALL INSTRUCTIONS BEFORE USE.
WARNING: To reduce the risk of fire, electric shock, serious personal injury, and property
damage, please note the following:
• Keep the kettle out of reach of children and pets. The kettle and its components
can become very hot during use.
• Before use, check the kettle for any visible damage, cracks, or defects. Do not
use it if damaged.
• Ensure the power cord is in good condition and not frayed or damaged. Never
use it if the cord is defective.
• If the kettle malfunctions, stops working, or shows signs of wear and tear,
disconnect it from the power. Do not attempt to repair it yourself. Refer to the
Warranty Policy on Page 10 for guidance.
• Ensure the kettle is plugged into a grounded, appropriately rated outlet. Do not
use an extension cord to power the kettle, as this can be a fire hazard.
• Only use clean, potable water in the kettle. Avoid using water with high levels
of minerals (hard water) to prevent mineral buildup.
• Always fill the kettle with the recommended amount of water. Do not exceed
the maximum fill line to avoid overflow or malfunction.
• Do not overfill the kettle, as this can lead to boiling over and burns.
• Never operate the kettle without water inside. Boiling an empty kettle can
cause overheating and damage the heating element.
• Place the kettle on a flat, stable, and heat-resistant surface. Ensure that the
kettle is placed away from the edge of countertops to avoid accidental spills.
• Keep hands, utensils, or other objects away from the spout or opening during
operation to avoid burns.
• The kettle is designed only for boiling water. Do not use it for any other
purpose, such as cooking food or heating non-water liquids unless specified in
the manufacturer’s instructions.
• Upon initial use, a smoky odor may occur as protective coatings or films on the
kettle's parts burn off. This is normal and ensures the proper functioning and
safety of the product. It is also recommended to boil water once without
adding any substances (such as tea or coffee) to help remove any
manufacturing oils or residues. After the first boil, discard the water and rinse
the kettle.
