Brydge 12.3 Pro+ Manual

Brydge Tastatur 12.3 Pro+

Læs gratis den danske manual til Brydge 12.3 Pro+ (6 sider) i kategorien Tastatur. Denne vejledning er vurderet som hjælpsom af 32 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 16.5 anmeldelser. Har du et spørgsmål om Brydge 12.3 Pro+, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/6

Brydge 12.3 Pro+ User Manual

Mode d’emploi

INSERT/REMOVE

POWER

PAIR

CHARGE

TO INSERT: Place your Brydge on a flat surface and set

the hinges upright to 90 degrees. Insert your Surface

Pro into the hinges, one side at a time, with the Wake

and Volume Buttons on top.

TO REMOVE: Ensure your Brydge is on a flat surface.

Place your hand towards the back of the keyboard and

pull up on your Surface Pro, one side at a time.

To manually power on, press and hold Fn + Delete keys.

The light will turn green for 2 seconds to indicate power.

To manually power off, press and hold Fn + Delete keys

for 2 seconds. The light will blink red momentarily to

indicate it’s powered off.

TO CHECK BATTERY LIFE: go to Windows > Settings

> Devices > Bluetooth & other devices, and check the

battery level on ‘Brydge 12.3 Pro+’.

NOTE: If battery life is below 15%, the backlit key

functionality will be disabled to conserve remaining

battery life and the light on the Delete key will blink red.

TO CHARGE: Insert the charging cable into the

keyboard and plug the other end into a power source.

A solid red LED on the delete key indicates the Brydge

is charging.

When the keyboard is fully charged, the red LED will

turn off. A full charge can take up to three hours.

1. Turn on your Brydge 12.3 Pro+

(Fn+Del), then press and hold

the Bluetooth key for three

seconds. The Delete key light

will flash blue confirming your

Brydge is in pairing mode.

3. Type in the PIN on your

Brydge 12.3 Pro+ and hit

Enter.

2. On your Surface Pro, select:

• Start

• Settings

• Devices

• Bluetooth & other devices

• Add Bluetooth or other device

• Bluetooth

• Brydge 12.3 Pro+

NOTE: If pairing takes longer than three minutes, the blue light will stop flashing and you will need to press the

Bluetooth button again.

SLEEP/WAKE

To conserve battery, your Brydge will enter sleep mode after 15 minutes of non-use. Press any key to wake it.

When you close your devices together, your Brydge will put your Surface Pro into sleep mode. When you open your

devices, your Brydge will wake your Surface Pro.

NOTE: Your Brydge will not put your Surface Pro to sleep or wake it after 15 minutes of non-use.

Produkt Specifikationer

Mærke:	Brydge
Kategori:	Tastatur
Model:	12.3 Pro+
Bredde:	201 mm
Dybde:	292 mm
Højde:	7 mm
Vægt:	662 g
Produktfarve:	Sølv
Husmateriale:	Aluminium, Plastic
Kabler inkluderet:	USB Type-C
Forbindelsesteknologi:	Trådløs
Strømkilde:	Batteri
Enhedsgrænseflade:	Bluetooth
Opladningsport type:	USB Type-C
Pegeredskab:	Touchpad
Numerisk tastatur:	Ingen
Ergonomisk designet:	Ingen
Batteriets levetid:	40 t
Baggrundslys:	Ja
Kapabilitet:	Surface Pro 7\nSurface Pro 6\nSurface Pro 5\nSurface Pro 4
Tastatursprog:	Engelsk
Mærke kompatibilitet:	Apple
Tastaturopsætning:	QWERTY