BSS Audio Soundweb 9008 Manual

BSS Audio Ikke kategoriseret Soundweb 9008

Læs gratis den danske manual til BSS Audio Soundweb 9008 (15 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 23 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 12 anmeldelser. Har du et spørgsmål om BSS Audio Soundweb 9008, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/15

Installation Guide

Soundweb

9008 Installation Guide

Regulatory Information

An example of this equipment has been tested and found to comply with the following

European and international Standards for Electromagnetic Compatibility and Electrical

Safety:

Emissions (EU): EN55013 (1990)

Generic Immunity (EU): EN50082-1 (1997)

Electrical Safety (EU): EN60065+A11 (1993)

Electrical Safety (USA): UL6500/ETL (1996)

Electrical Safety (CAN): CAN/CSA-E65/ETLc (1994)

Radiated Emissions (USA): FCC parts 15 Class B

For continued compliance with international EMC regulations, it is important that all

cables be screened, and connected as follows:

 Audio cable screens to their 9008 connector ground.

 Control cable screens to the ground screws adjacent to the connector.

Network cables should be of type CAT. 5

IMPORTANT SAFETY INFORMATION

Do not remove covers.

No user serviceable parts inside - refer servicing to qualified service personnel.

This equipment must be earthed.

It should not be necessary to remove any protective earth or signal cable shield

connections to prevent ground loops. Any such disconnections are outside the

recommended practice of BSS Audio and will render the EMC or safety certification

void.

Mechanical Installation

If the unit is likely to undergo extreme vibration through extensive road trucking and

touring, it must be supported at the rear and/or sides to lessen the stress on the front

mounting flange. Use either a ready-built rack tray or mount the 9008 unit between other

units. Damage caused by insufficient support is not covered by the warranty.

To prevent cosmetic damage to the front panel finish, use protective plastic cups under

the rack mounting bolts.

Produkt Specifikationer

Mærke:	BSS Audio
Kategori:	Ikke kategoriseret
Model:	Soundweb 9008

Har du brug for hjælp?

Hvis du har brug for hjælp til BSS Audio Soundweb 9008 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret BSS Audio Manualer

BSS Audio DPR-402 Manual

27 August 2024

BSS Audio FDS-310 Manual

27 August 2024

BSS Audio Soundweb 9010 Manual

27 August 2024

BSS Audio MSR-602 Manual

27 August 2024

BSS Audio FCS-966 Manual

27 August 2024

BSS Audio FDS-355 Manual

27 August 2024

BSS Audio DPR-944 Manual

27 August 2024

BSS Audio Soundweb 3088 Manual

27 August 2024

BSS Audio FCS-960 Manual

27 August 2024

BSS Audio DPR-522 Manual

27 August 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Playtive IAN 303676 Manual

16 Juni 2025

Playtive IAN 307527 Manual

16 Juni 2025

Playtive IAN 327441 Manual

16 Juni 2025

Xblitz G750 Pro Manual

16 Juni 2025

Playtive IAN 285603 Manual

16 Juni 2025

Playtive HG05646 Manual

16 Juni 2025

Milwaukee M12 IR Manual

16 Juni 2025

Blodgett Invoq 202BG Manual

16 Juni 2025

Aiphone GT-AD Manual

16 Juni 2025

Playtive IAN 113608 Manual

16 Juni 2025